American Dynamics Browser Client Bedienungsanleitung

Browser Client

Version 4.2

Part Number 8200-2603-26 A0

User’s Guide

Notice

The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products.

All specifications are therefore subject to change without notice.

Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated or reduced to any

American Dynamics

6600 Congress Avenue

Boca Raton, FL 33487 U.S.A.

Customer Service

Thank you for using American Dynamics products. We support our products through an extensive worldwide network of dealers. The

dealer through whom you originally purchased this product is your point of contact if you need service or support. Our dealers are

empowered to provide the very best in customer service and support. Dealers should contact American Dynamics at (800) 507-6268

or (561) 912-6259 or on the Web at www.americandynamics.net.

Trademarks

Intellex®is a registered trademark of Sensormatic Electronics Corporation. Windows®is a registered trademark of Microsoft

Corporation. PS/2®is a registered trademark of International Business Machines Corporation. Sony®is a registered trademark of

Sony Corporation.

Trademarked names are used throughout this manual. Rather than place a symbol at each occurrence, trademarked names are

designated with initial capitalization. Inclusion or exclusion is not a judgment on the validity or legal status of the term.

Thank you for using American Dynamics products. We support our products through an extensive worldwide network of dealers. The

dealer through whom you originally purchased this product is your point of contact if you need service or support. Our dealers are

empowered to provide the very best in customer service and support. Dealers should contact American Dynamics at (800) 507-6268

or (561) 912-6259 or on the Web at www.americandynamics.net.

iii

License Information

READ THIS LICENSE AGREEMENT BEFORE OPENING THE DISK PACKAGE, INSTALLING THE SOFTWARE, OR USING YOUR

SYSTEM.

THIS LICENSE AGREEMENT DEFINES YOUR RIGHTS AND OBLIGATIONS. BY BREAKING THE SEAL ON THIS PACKAGE,

INSTALLING THE SOFTWARE, OR USING YOUR SYSTEM, YOU AGREE TO ALL OF THE TERMS AND CONDITIONS OF THIS

AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT, YOU MAY, WITHIN

30 DAYS, RETURN THIS PACKAGE, ALL THE DOCUMENTATION, AND ALL ACCOMPANYING MATERIAL(S) TO THE POINT OF

PURCHASE FOR A REFUND.

SOFTWARE LICENSE

The Software includes the computer code, programs, and files, the associated media, hardware or software keys, any printed

material, and any electronic documentation. The Software may be provided to you pre-installed on a storage device (the media) as

part of a system. The Software is licensed, not sold.

GRANT OF LICENSE

This agreement between Sensormatic Electronics Corporation (Sensormatic) and you permits you to use the Software you

purchased. Once you have purchased the number of copies you require, you may use the Software and accompanying material

provided you install and use no more than the licensed number of copies at one time. The Software is only licensed for use with

specified Sensormatic supplied equipment. If the Software is protected by a software or hardware key or other device, the Software

may be used on any computer where the key is installed. If the key locks the Software to a particular System, the Software may only

be used on that System.

OTHER RIGHTS AND LIMITATIONS

• A demonstration copy of the Software is considered purchased and is covered by this license agreement.

• You may not de-compile, disassemble, reverse engineer, copy, transfer, modify, or otherwise use the Software except as stated in

this agreement.

• The hardware/software key, where applicable, is your proof of license to exercise the rights granted herein and must be retained

by you. Lost or stolen keys will not be replaced.

• If the Software is provided as part of a System, the Software may only be used with the System.

• You may not sub-license, rent or lease the Software, but you may permanently transfer the Software to another party by

delivering the original disk and material comprising the Software package as well as this license agreement to the other party.

Initial use of the Software and accompanying material by the new user transfers the license to the new user and constitutes the

new user's acceptance of its terms and conditions.

• The Software is not fault tolerant and may contain errors. You agree that the Software will not be used in an environment or

application in which a malfunction of the Software would result in foreseeable risk of injury or death to the operator of the

Software, or to others.

• Sensormatic reserves the right to revoke this agreement if you fail to comply with the terms and conditions of this agreement. In

such an event, you must destroy all copies of the Software, and all of its component parts (e.g., documentation, hardware box,

software key).

• The Software may contain software from third parties that is licensed under a separate End User License Agreement (EULA).

Read and retain any license documentation that may be included with the Software. Compliance with the terms of any third party

EULA is required as a condition of this agreement.

• The Software may require registration with Sensormatic prior to use. If you do not register the Software this agreement is

automatically terminated and you may not use the Software.

• The Microsoft® Windows® Preinstallation Environment Version 1.2, Services Edition software, if included with this software or

system, may be used for boot, diagnostic or recovery purposes only. NOTE: THIS SOFTWARE CONTAINS A SECURITY

FEATURE THAT, IF USED AS AN OPERATING SYSTEM, WILL CAUSE YOUR DEVICE TO REBOOT WITHOUT PRIOR

NOTIFICATION AFTER 24 HOURS OF CONTINUOUS USE OF THE SOFTWARE.

•UPGRADES AND UPDATES. Software Upgrades and Updates may only be used to replace all or part of the original Software.

Software Upgrades and Updates do not increase the number copies licensed to you. If the Software is an upgrade of a

component of a package of Software programs that you licensed as a single product, the Software may be used and transferred

only as part of that single product package and may not be separated for use on more than one computer. Software Upgrades

and Updates downloaded free of charge via a Sensormatic authorized World Wide Web or FTP site may be used to upgrade

multiple systems provided that you are licensed to use the original Software on those systems.

•INTELLEX PLAYER. The Intellex Player Software that is exported with video clips and/or distributed via Sensormatic authorized

World Wide Web site may be copied by you for use within your organization or for distribution to external parties for law

enforcement, investigative, or adjudicative purposes and only to display video recorded by an Intellex system. The Intellex Player

Software may not be sold. All other terms and conditions of this agreement continue to apply.

•TOOLS AND UTILITIES. Software distributed via Sensormatic authorized World Wide Web or FTP site as a tool or utility may be

copied and installed without limitation provided that the Software is not distributed or sold and the Software is only used for the

intended purpose of the tool or utility and in conjunction with Sensormatic products. All other terms and conditions of this

agreement continue to apply.

Failure to comply with any of these restrictions will result in automatic termination of this license and will make available to

Sensormatic other legal remedies.

LIMITED WARRANTY

Sensormatic warrants that the recording medium on which the Software is recorded, hardware key, and the documentation provided

with it, will be free of defects in materials and workmanship under normal use for a period of ninety (90) days from the date of delivery

to the first user. Sensormatic further warrants that for the same period, the software provided on the recording medium under this

license will substantially perform as described in the user documentation provided with the product when used with the specified

hardware.

CUSTOMER REMEDIES

Sensormatic's entire liability and your exclusive remedy under this warranty will be, at Sensormatic's option, to a). attempt to correct

software errors with efforts we believe suitable to the problem, b). replace at no cost the recording medium, software or

documentation with functional equivalents as applicable, or c). refund the license fee and terminate this agreement. Any replacement

item will be warranted for the remainder of the original warranty period. No remedy is provided for failure of the Software if such

failure is the result of accident, abuse, alteration or misapplication. Warranty service or assistance is provided at the original point of

purchase.

NO OTHER WARRANTIES

The above warranty is in lieu of all other warranties, express or implied, including, but not limited to the implied warranties of

merchantability and fitness for a particular purpose. No oral or written information or advice given by Sensormatic, its representatives,

distributors or dealers shall create any other warranty, and you may not rely on such information or advice.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES

In no event will Sensormatic be liable to you for damages, including any loss of profits, loss of data or other incidental or

consequential damages arising out of your use of, or inability to use, the Software or its documentation. This limitation will apply even

if Sensormatic or an authorized representative has been advised of the possibility of such damages. Further, Sensormatic does not

warrant that the operation of the Software will be uninterrupted or error free. This limited warranty gives you specific legal rights. You

may have other rights that vary from state to state. Some states do not allow the exclusion of incidental or consequential damages, or

the limitation on how long an implied warranty lasts, so some of the above limitations may not apply to you.

GENERAL

If any provision of the agreement is found to be unlawful, void, or for any reason unenforceable, then that provision shall be severed

from this agreement and shall not affect the validity and enforceability of the remaining provisions. This agreement is governed by the

laws of the State of Florida. You should retain proof of the license fee paid, including model number, serial number and date of

payment, and present such proof of payment when service or assistance covered by this warranty is requested.

U.S. GOVERNMENT RESTRICTED RIGHTS

The software and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS

252.227-7013 or subparagraph (c)(1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as

applicable. Manufacturer is Sensormatic Electronics Corporation, 6600 Congress Avenue, Boca Raton, FL, 33487.

Contents

Browser Client

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Logging in to Browser Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Changing Your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Viewing Live Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Browser Client

Overview

Browser Client is a web-based application that allows users to point their browser at a URL and

view live video from a set of Intellex units.

Browser Client 4.2 is compatible with Intellex 3.2, 4.0, 4.1 and 4.2 software.

The user interface comprises two sections, one for the administrator and one for the user. This

document describes user functions. The user can:

• Log in to the Browser Client web application

• Change his/her password

• View live video.

System Requirements

• Internet Explorer 6.0 or greater, or other browser able to host Active X controls (configure the

browser to support Active X controls and Active X control scripting)

• The client side OS requirements from the Browser Client 4.2 Administrator’s Guide

• A fast Internet (or Intranet) connection

Logging in to Browser Client

1Point the browser at the path for Browser Client; e.g.192.168.1.1/BrowserClient. The login

page appears as follows:

2Enter your User Name and Password as assigned by your system administrator.

Browser Client

2User’s Guide

3Click Login. The home page appears.

Changing Your Password

1If you wish to change your password, click Change Password on the left side of the screen. The

Change Password screen appears.

2Enter password information, then click Update. A message appears confirming that the

password was changed successfully.

Browser Client

Browser Client 3

Viewing Live Video

1Click Home on the left side of the screen. The home page screen appears.

2Click Continue. The Browser Client ActiveX downloads to your unit and the Browser Client

screen displays:

3From the dropdown menu, select an instrument.

4Drag and drop a camera or instrument over the video pane. You can view live video from that

camera or instrument.

5Right-click the live video display to bring up a menu that allows you to:

• Increase or decrease video quality

• Switch between high and low resolution

• Remove one or all cameras.

6If camera control is available, the camera control icon appears in the view pane. Click it to

manipulate camera controls.

7Optional: Select Show Overlay to display information (Intellex name, camera name, date, time

and alarm type) on the main screen.

8Optional: Select DirectDraw support.

Note

DirectDraw provides improved video quality, smoother images, and maximizes computer

performance. However, you must install a video card and appropriate software drivers with

DirectDraw support on the computer that is running Browser Client.

9Sign out when you have finished displaying video. The login screen appears.

Select an

instrumentfrom this

dropdown menu.

Themenushowsall

the instruments the

administrator

assigned to this

user.

List of cameras

assigned to this

instrument.

Display live

video from 1,

4, 9, or 16

cameras.

Turn text overlay

and direct draw

on and off.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere American Dynamics Software Handbücher

American Dynamics

American Dynamics Intellex Digital Recorder Bedienungsanleitung

American Dynamics

American Dynamics Intellex Policy Manager Bedienerhandbuch

American Dynamics

American Dynamics SpeedDome Ultra III Bedienungsanleitung

American Dynamics

American Dynamics MegaPower 48 Plus Bedienungsanleitung

American Dynamics

American Dynamics SpeedDome Ultra II Bedienungsanleitung

American Dynamics

American Dynamics Excalibur 168 Bedienungsanleitung

American Dynamics

American Dynamics Excalibur AD5500 Handbuch

American Dynamics

American Dynamics SpeedDome Ultra VII EIS Bedienungsanleitung

American Dynamics

American Dynamics SpeedDome Ultra VII Montage- und Bedienungsanleitung

American Dynamics

American Dynamics Excalibur 168 Handbuch

American Dynamics

American Dynamics Excalibur 168 Bedienungsanleitung

American Dynamics

American Dynamics Intellex Intellex LT Kurzanleitung

American Dynamics

American Dynamics MegaPower 3200 Bedienungsanleitung

American Dynamics

American Dynamics Version 4.3 Software Update 3 Anleitung zur Verwendung

American Dynamics

American Dynamics RAS915LS Bedienungsanleitung

American Dynamics

American Dynamics Intellex Policy Manager Bedienungsanleitung

American Dynamics

American Dynamics Intellex Digital Recorder Bedienerhandbuch

American Dynamics

American Dynamics CPU Activity Log Client Betriebsanleitung

American Dynamics

American Dynamics Video Management Systems Bedienungsanleitung

American Dynamics

American Dynamics SpeedDome Ultra VII Bedienungsanleitung

American Dynamics

American Dynamics MegaPower 3200 Release 2.0 Anleitung zur Verwendung

American Dynamics

American Dynamics EDVR Calculator Bedienungsanleitung

American Dynamics

American Dynamics RAS915 Bedienungsanleitung

American Dynamics

American Dynamics Excalibur AD5500 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung