American Weigh CD Series Bedienungsanleitung

User Manual

500 x 0.1g

Scale

Compact Digital Scale

CD|Scale User Manual

Thank you for purchasing the American Weigh CD Scale. Please

read all operating instructions carefully before use. This electronic

scale is a precision instrument. With normal care proper treat-

ment, it will provide years of reliable service.

Never load the scale with more than the maximal capacity.

Overloading can permanently damage it! Avoid any exposure to

extreme heat or cold, your scale works better when operated at

normal room temperature. Always allow the scale to acclimate to

normal room temperature for at least 1 hour before use.

Give your scale suf cient warm up time - usually 30 seconds to

give the internal components a chance to stabilize before calibra-

tion. Keep your scale in a clean environment. Dust, dirt, moisture,

vibration, air currents and a close distance to other electronic

equipment can all cause an adverse effect on the reliability and

accuracy of your scale. Handle with care. Gently apply all items

to be weighed onto the platform. Although this scale is designed

to be quite durable, try to avoid rough treatment as this may per-

manently damage the internal sensor. Avoid shaking, dropping or

otherwise shocking the scale. This is a precision instrument and

must be handled with extreme care. Only operate the scale on a

stable, vibration free surface.

I. OPERATION:

1. Place scale on a horizontal  at surface, press [I/O]

2. Wait until “0.0” is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [M] key, you can switch between the weighing units.

II. TARE WEIGHING:

1. Turn on scale as described above.

2. Place the “tare item” on the platform.

3. Press [T] and wait until “0.0” is displayed.

4. Add the “net-weight-item”.

IV. CALIBRATION:

If the scale is not weighing correctly, please calibrate as follows:

1. Reset the scale by pressing [I/O] key.

2. Press [M] key quickly and hold it until LCD displays “CAL”.

3. Then release the [M] key.

4. Press [M] key again.

5. After LCD  ashes “CAL” and “500.0” three times, add 500g cal

weight, wait 3-4 seconds, LCD displays “PASS” then “500.0”.

6. Put away cal weight press [I/O] key to turn off scale, the

calibration is  nished.

**Repeat this process if scale is still displaying incorrect weight.

Please check the availability of weights at the store from which you

have bought your scale.

V. TROUBLESHOOTING:

The primary reasons for inaccuracy or malfunction are low bat-

teries, incorrect calibration, overload or operating on an unstable

surface. Please keep this in mind and maintain and operate your

scale property. This scale is a precise instrument and must be

handed with the utmost care and caution.

Display

Elimination of errors

Nothing, Battery-Symbol, [lo]

Change the batteries.

[OUT2]

Recalibrate the scale as shown above.

[O-LD]

You are overloading the scale, Remove the

excessive load immediately!

[O-LD] or [LLLLL]

The delicate weighing load cells have been

damaged by misusing the scale (i.e. it was

shocked, dropped or overloaded). You can try

recalibrating the scale. If the load cell has not

been damaged too much it will work again

after recalibration.

[UNST]

Use the scale in a more stable position.

Speci cations

Model

CD-500

Capacity

500.0g / 17.64oz/ 16.08ozt / 321.5dwt

Resolution

0.1 g, 0.01 oz, 0.01 ozt, 0.1 dwt

Weighing Units

grams (g), ounces (oz), pennyweights (dwt), troy ounces (ozt)

Display

4 - Digit LCD

Calibration Weight

(not included)

500g

Platform Dimensions

(inches)

x 3-

Scale Dimensions

(inches)

x 5-

Power

2 x AAA (included) or AC Adaptor (Sold Seperate)

Gross Weight

0.76 lb

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere American Weigh Skala Handbücher

American Weigh

American Weigh AMW-1000 Bedienungsanleitung

American Weigh

American Weigh AMW-822 Bedienungsanleitung

American Weigh

American Weigh AMW-Card Bedienungsanleitung

American Weigh

American Weigh AMW-13 Bedienungsanleitung

American Weigh

American Weigh AMW-810 Bedienungsanleitung

American Weigh

American Weigh Blade 150 Bedienungsanleitung

American Weigh

American Weigh AMW-DISC-55 Bedienungsanleitung

American Weigh

American Weigh AMW-50 Bedienungsanleitung

American Weigh

American Weigh AMW-500 Bedienungsanleitung

American Weigh

American Weigh AMW-100 Bedienungsanleitung

American Weigh

American Weigh Mini CD-300 Bedienungsanleitung

American Weigh

American Weigh CD-V2-500 Bedienungsanleitung

American Weigh

American Weigh AMW-250i Bedienungsanleitung

American Weigh

American Weigh AMW-150M Bedienungsanleitung

American Weigh

American Weigh CD-1000 Bedienungsanleitung

American Weigh

American Weigh CD-Scale v2.0 Bedienungsanleitung

American Weigh

American Weigh miniPRO-30 Bedienungsanleitung

American Weigh

American Weigh AMW-CDV2-500 Bedienungsanleitung

American Weigh

American Weigh AMW-SCOOP Bedienungsanleitung

American Weigh

American Weigh AMW-440T Bedienungsanleitung

American Weigh

American Weigh AMW-850 Bedienungsanleitung

American Weigh

American Weigh DIA-10 Bedienungsanleitung

American Weigh

American Weigh AMW-330 Bedienungsanleitung

American Weigh

American Weigh AMW-875 Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

Rice Lake

Rice Lake MSI-4260 IS Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung