Ameriphone AMRX2 Bedienungsanleitung
©AMERIPHONE products are manufactured by Walker,
A Division of Plantronics, Inc.
12082 Western Avenue, Garden Grove, CA 92841
(800) 874-3005 VOICE • (800) 772-2889 TTY/TDD
(714) 897-4703 FAX
website: www.ameriphone.com
®
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
E
N
G
L
I
S
H
AM100 M08298 A4/03
ALERTMASTER®AM-RX2
REMOTE RECEIVER
®
Users’Guide
∆
Important Safety
Instructions
Contents
Important safety Instructions ........................................1
Installation.................................................................8
Operations...............................................................10
Channel Setting ........................................................12
Regulatory Compliance .............................................15
UK Statutory Information...........................................23
In Case of Difficulty...................................................24
Warranty.................................................................25
Español ...................................................................27
Français...................................................................56
E
N
G
L
I
S
H
Important Safety
Instructions
1
Important Safety
Instructions
When using your Alertmaster
AM-Rx2, basic safety
precautions should always
be followed to reduce the
risk of fire, electric shock
and persons including the
following:
1. Read and understand
all instructions.
2. Follow all warnings
and instructions
marked on the
product.
3. Do not use this
product near a
bathtub, wash basin,
kitchen sink or laundry
tub, in a wet basement,
near a swimming pool
or anywhere else there
is water.
4. Avoid using a telephone
(other than a cordless
type) during a storm.
There may be a remote
risk of electrical shock
from lightning.
5. Do not use a telephone
to report a gas leak in
the vicinity of the leak.
6. Unplug this product
from the wall outlets
before cleaning. Do
not use liquid cleaners
or aerosol cleaners on
the product. Use a
damp cloth for cleaning.
7. Place this product on
a stable surface.
Serious damage
and/or injury may
result if the product
Important Safety
Instructions
Important Safety
Instructions
2
falls.
8. Do not cover the slots
and openings on this
product. This product
should never be placed
near or over a radiator
or heat register. This
product should not be
placed in a built-in
installation unless
proper ventilation is
provided.
9. Operate this product
using the electrical
voltage as stated on
the base unit or the
owner’s manual. If you
are not sure of the
voltage in your home,
consult your dealer or
local power company.
10. Do not place
anything on the power
cord. Install the
product where no
one will step or trip on
the cord.
11. Do not overload wall
outlets or extension
cords as this can
increase the risk of fire
or electrical shock.
12. Never push any
objects through the
slots in the product.
They can touch
dangerous voltage
points or short out
parts that could
result in a risk of fire
or electrical shock.
Never spill liquid of
E
N
G
L
I
S
H
Important Safety
Instructions
3
any kind on the
product.
13. To reduce the risk of
electrical shock, do not
take this product apart.
Opening or removing
covers may expose
you to dangerous
voltages or other
risks. Incorrect
reassembly can cause
electric shock when
the appliance is
subsequently used.
14. Unplug this product
from the wall outlets
and refer servicing to
the manufacturer
under the following
conditions:
A. When the power
supply cord or plug
is frayed or
damaged.
B. If liquid has been
spilled into the
product.
C. If the product has
been exposed to
rain or water.
D. If the product
does not operate
normally by
following the
operating
instructions. Adjust
only those controls
that are covered by
the operating
instructions.
Improper adjustment
may require
Important Safety
Instructions
4
extensive work by a
qualified technician
to restore the
product to
normal operation.
E. If the product has
been dropped or
the case has
been damaged.
F. If the product
exhibits a distinct
change in
performance.
15. Never install telephone
wiring during a
lightning storm.
16. Never install telephone
jacks in wet locations
unless the jack is
specifically designed
for wet locations.
17. Never touch uninsulated
telephone wires or
terminals unless the
telephone line has
been disconnected at
the network interface.
18. Use caution when
installing or modifying
telephone lines.
19. Use only the power
cord and batteries
indicated in this
manual. Do not
dispose of batteries in
a fire. They may
explode. Check with
local codes for
possible special
disposal instructions.
E
N
G
L
I
S
H
Important Safety
Instructions
5
ADDITIONAL SAFETY NOTES
FOR CANADIAN USERS
The following items are
included as part of the
CS-03 Requirements. The
standard connecting
arrangement for the
equipment is CA11A. This
product meets the applicable
Industry Canada technical
specifications.
NOTICE: The Canadian
Department of
Communications label
identifies certified equipment.
This certification means that
the equipment meets certain
telecommunications network
protective operational and
safety requirements. The
Department does not
guarantee that the
equipment will operate to
the user’s satisfaction.
Before installing this
equipment, users should
ensure that it is permissible
to be connected to the
facilities of the local
telecommunications
company. The equipment
must also be installed using
an acceptable method of
connection. In some cases,
the company’s inside wiring
associated with a single line
individual service may be
extended by means of a
certified connector assembly
(telephone extension cord).
Important Safety
Instructions
6
The customer should be
aware that compliance with
the above conditions may
not prevent degradation of
service in some situations.
Repairs to certified
equipment should be made
by an authorized Canadian
maintenance facility
designated by the supplier.
Any repairs or alterations
made by the user to this
equipment, or equipment
malfunctions, may give the
telecommunications
company cause to request
the user disconnect the
equipment.
Users should ensure for their
own protection that the
electrical ground
connections of the power
utility, telephone lines and
internal metallic water pipe
system, if present, are
connected together. This
precaution may be
particularly important in
rural areas.
CAUTION: Users should not
attempt to make such
connections themselves, but
should contact the appropriate
electric inspection authority,
or electrician, as
appropriate. The Ringer
Equivalent Number is an
indication of the maximum
number of terminals allowed
to be connected to a
E
N
G
L
I
S
H
Important Safety
Instructions
7
telephone interface. The
termination on an interface
may consist of any
combination of devices
subject only to the
requirement that the sum of
the Ringer Equivalent
Number of all the devices
not exceed five.
SAVE THESE INSTRUCTIONS
Andere Handbücher für AMRX2
1
Inhaltsverzeichnis
Sprachen:
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
