Ames Instruments 64014 Montageanleitung
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 18e
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2018 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ol s r eq ui r ed f o r as s em bl y a nd se rvice m a y not be i nc luded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64014
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
G,+7*%&2%O&8$*8$#
Safety ..........................................2
Specifications ..............................5
Setup ...........................................6
Operation ..................................... 8
Maintenance ...............................14
Warranty .....................................16
QFKMLMR%EHNSITE%FMU%U6;LMLGLIME
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64014
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
LNJIKGFMG%EF;6GH%LM;IKNFGLIM
E,2*$V%Q,(8"83#%,89%J(*4,'$"&8#
K*,9%,77%#,2*$V%),(8"83#%,89%,77%"8#$('4$"&8#1%%
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
E,W*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1
1. Electrical shock can cause death
or injury! NEVER TOUCH exposed
conductors of electricity.
2. G*#$%4,+7*%W&7$,3*#%)"$.%4,(*1
3. Inspect the Multimeter before
use. In addition to a general
inspection, look specifically for:
a. Pay special attention to the
insulation protecting the connectors.
b. Check the leads for exposed metal,
damaged insulation, and continuity.
c. Replace damaged test lead
immediately, before use.
4. Do not use the Multimeter if:
a. Either of the test leads are
damaged in any way.
b. Test leads are dirty or
have residue on them.
c. The battery is low.
d. Near any explosive
gasses or fumes.
e. Any abnormal operation is
detected.
(If in doubt about the
condition of the Meter, have
it serviced before use).
f. The battery cover is open.
5. Power this Meter using only
the battery(ies) referenced in
the Specifications Chart.
6. Use caution when working near
voltages above 30 VAC rms,
42 VAC peak, or 60 VDC. Voltages this
high present a risk of electric shock.
7. Disconnect the circuit’s power
before connecting the Meter in
series, when measuring current.
8. Connect the common (COM) test
lead first and disconnect it last.
9. Hold the probes with fingers
behind guards.
10. Avoid electrical shock. Use extreme
caution when working near uninsulated
conductors or bus bars. Prevent body
contact with grounded surfaces such
as pipes, radiators, ranges, and cabinet
enclosures when testing voltages.
11. Observe work area conditions. Do
not test voltages in damp or wet
locations. Don’t expose to rain.
Keep work area clean and well lit.
12. Keep children away. Children must
never be allowed in the work area.
13. Stay alert. Watch what you are doing,
use common sense. Do not operate
any meter when you are tired.
14. Do not operate meter if under the
influence of alcohol or drugs. Read
warning labels on prescriptions
to determine if your judgment or
reflexes are impaired while taking
drugs. If there is any doubt,
do not operate the meter.
Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64014
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
15. People with pacemakers should
consult their physician before use.
Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference
or pacemaker failure.
16. Do not test voltage on circuits
higher than 600 volts.
17. Do not test current on circuits
higher than 10 amps.
18. Dress properly. Protective,
electrically nonconductive
clothes and nonskid footwear are
recommended when working.
19. Wear ANSI-approved safety
goggles during use.
20. Only use accessories intended
for use with this meter.
21. Avoid damaging meter. Use only
as specified in this manual.
22. Prior to testing resistance, diodes,
or continuity; disconnect all power
to the circuit and discharge all
high-voltage capacitors.
23. Performance of this meter may vary
depending on battery condition.
24. Use the proper settings, terminals,
techniques, and range for the
tests performed. Start with the
range stated in the instructions.
25. Do not apply voltage to the Test
Leads when the Multimeter is in
the Ohms testing setting. Damage
can occur to the Meter.
26. Do not switch between testing
modes with the multimeter
connected to a circuit.
27. Do not use the meter at a setting
marked as blank on the scale.
28. Have the multimeter calibrated by
a qualified technician every year
to maintain accurate results.
29. Do not disassemble multimeter;
take it to a qualified technician
when service or repair is required.
Incorrect reassembly may result
in a risk of electric shock or fire.
30. The warnings, cautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must
be supplied by the operator.
%EF!6%GX6E6%LMEGKPOGLIME1
Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64014
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
E/*4"2"4,$"&8#
DC Voltage Ranges: 200mV / 2V / 20V / 200V / 600V DC (max)
Input Impedance: 10MΩ
DC Voltage Accuracy (@200mV - 200V) ± 0.5% of rdg + 3D
(@600V) ± 0.8% of rdg + 3D
DC Current Ranges: 200μA / 2000μA / 20mA / 200mA / 10A
DC Current Accuracy (@ 200μA - 200mA) ± 0.8% of rdg +3D
(@10A) ± 1.0% of rdg + 10D
AC Voltage Ranges: 2V / 20V / 200V / 600V AC rms (max)
Frequency Response: 40Hz - 400Hz
AC Voltage Accuracy (@2V - 200V) ± 0.5% of rdg + 5D
(@600V) ± 1.0% of rdg + 5D
AC Current Ranges: 200μA / 2000μA / 20mA / 200mA / 10A
AC Current Accuracy (@200μA - 20mA) ± 1.0% of rdg + 3D
(@200mA) ± 1.2% of rdg +3D
(@10A) ± 1.5% of rdg + 10D
Resistance Ranges: 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ
Resistance Accuracy (@200Ω - 2MΩ) ± 0.8% of rdg + 4D
(@20MΩ) ± 1.0% of rdg + 4D
Diode 1.5V forward voltage drop
Battery Test Accuracy (@12V / 9V) ± 0.8% of rdg +7D
(@1.5V) ± 3.0% of rdg +5D
Continuity Meter beeps at < 50Ω ± 20Ω
Temperature Range: -4°F - 1382°F (-20°C - 750°C)
Temperature Accuracy (@-20°C - 750°C) ± 2.0% of rdg +2D
(@-4°F - 1382°F) ± 2.0% of rdg + 4D
Operating Temperature Range: 32°F - 104°F (0°C - 40°C)
Operating Humidity <80% RH
Overload Protection (mA jack) FF 400mA H 600V fuse (F2)
(A jack) FF 10A H 600V fuse (F1)
Display LCD
Battery 9V (included)
Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64014
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
E*$'/%?%S*2&(*%P#*-
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%
,$%$.*%+*3"88"83%&2%$."#%5,8',7%"847'9"83%,77%$*Y$%'89*(%
#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
;'84$"&8#
K,83*%S'$$&8
OIN%Z,4[
U"#/7,V
U,$,%
X&79%
S'$$&8
;'84$"&8%
S'$$&8
M&8?O&8$,4$%
!&7$,3*%
S'$$&8
K&$,(V%
E)"$4.
F
Z,4[ L8/'$%
Z,4[
E$,89%
\&8%+,4[]
Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64014
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
U"#/7,V
EV5+&7 U*#4("/$"&8
FPGI Auto range mode
UFGF Indicates that display data is being held
Diode test
Continuity buzzer
Battery low indicator
UO Direct current
FO Alternating current
^O%%^; Celsius / Fahrenheit (temperature)
kMΩ Ohms, Kilohms, Megohms (resistance)
mμVA Milli/Micro, Volts (voltage) /
Amperes (current)
Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64014
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
I/*(,$"83%L8#$('4$"&8#
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%
,$%$.*%+*3"88"83%&2%$."#%5,8',7%"847'9"83%,77%$*Y$%'89*(%
#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
67*4$("4,7%#.&4[%4,8%4,'#*%9*,$.%&(%"8_'(V`%M6!6K%GIPOX%
*Y/&#*9%4&89'4$&(#%&2%*7*4$("4"$V1
R*8*(,7%I/*(,$"&8
;PMO%S'$$&8
Press the ;PMO Button to switch between AC/DC or other functions.
U,$,%X&79%S'$$&8
The data XITU function keeps the current reading on the Display.
1. To activate hold, press the XITU
Button. The reading will be held on the
Display and the %symbol will appear.
2. Press XITU again to release the hold.
KFM%S'$$&8
The KFM function allows you to manually switch through different ranges.
1. Press the KFM Button to enable
manual selection. When
enabled, the FPGI indicator will
disappear from the Display.
2. Pressing the KFM Button will progress
the reading to the next higher range
and as you press it will move the
range up until the highest is reached.
3. When the highest is reached, the
next press of the KFM Button will
switch to the range to the lowest.
4. Hold down the KFM Button to
return to auto range. When in
auto range the FPGI indicator will
reappear on the Display and you
can release the KFM Button.
Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64014
EF;6GHIJ6KFGLIMNFLMG6MFMO6 E6GPJ
MO!%\M&8?O&8$,4$%FO%!&7$,3*]%S'$$&8
The MO! function allows you to use the Meter for voltage detection.
1. To activate, hold down the
MO! Button in any mode.
2. Move the Meter close to the voltage
source or unshielded conductor. If
voltage is detected, the meter will
beep and the Non-Contact Voltage
Indicator will flash.
3. Release the MO! Button to
stop voltage detection.
QFKMLMR`%6W*8%"2%8&%"89"4,$"&8%"#%
3"W*8=%W&7$,3*%5,V%#$"77%+*%/(*#*8$1
Do not rely solely on NCV detection to
determine the presence of voltage.
F'$&%J&)*(?I22%I/*(,$"&8
If the Meter is not used for approximately 15 minutes, it automatically turns
itself off to conserve battery power. To turn the Meter back on after auto-
off, press any Button or turn the rotary switch. To disable Auto Power-Off,
press and hold down the XITU Button when powering on the Meter.
Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64014
EF;6GH IJ6KFGLIM NFLMG6MFMO6E6GPJ
N*,#'(*5*8$%I/*(,$"&8
M&$*- Remove plugs from
ends of Test Leads (included)
before connecting to Meter.
M&$*- Test Lead probes have removable
covers for overvoltage protection. With
covers in place, Test Leads are rated for
use with CAT III circuits. Exposed probes
are rated for use with CAT II circuits.
FO0UO%!&7$,3*%N*,#'(*5*8$
Measure AC conductors carrying up to 600 VAC, from 40 Hz to 400 Hz.
Measure DC conductors carrying up to 600 VDC.
QFKMLMR`% Use caution when working
near voltages above 30 VAC rms,
42 VAC peak, or 60 VDC. Voltages this
high present a risk of electric shock.
QFKMLMR` %To prevent damage
to the Meter or personal injury, do
not measure voltages higher than
600 VDC or 600 VAC rms.
1. Plug black test lead into OIN Jack.
Plug red test lead into L8/'$ Jack.
2. Turn Rotary Switch to the %position.
3. Press ;PMO Button to choose
between AC and DC voltage.
4. While observing polarity, carefully
touch exposed conductors
with tips of probes.
5. Read measured voltage on the Display.
• ″IT” displayed on the Meter
indicates the measurement
exceeds the current range.
6. When testing is complete, turn
Rotary Switch to I;;, remove
Test Leads and store with Meter.
G*5/*(,$'(*%N*,#'(*5*8$
Measure temperature from -4°F to 1382°F (-20°C to 750°C).
1. Connect red end of Thermocouple
(included) to the L8/'$ Jack and
the black end to the OIN Jack.
2. Turn Rotary Switch to the G*5/
position. The Display will show
the current ambient temperature.
Press ;PMO to switch between
Celsius and Fahrenheit.
3. Touch the tip of the Thermocouple
to the object to be tested.
4. Read measured temperature
on the Display.
5. When is complete, turn Rotary
Switch to OFF remove Thermocouple
and store with Meter.
QFKMLMR`%%To prevent electric
shock, remove Thermocouple before
switching between testing modes.
Inhaltsverzeichnis
Beliebte Multimeter Handbücher anderer Marken
Gossen MetraWatt
Gossen MetraWatt METRAmax 6 Bedienungsanleitung
PeakTech
PeakTech 4000 Gebrauchs- und Pflegehandbuch
YOKOGAWA
YOKOGAWA 90050B Bedienungsanleitung
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung
Fluke
Fluke 8846A Bedienungs- und Wartungshandbuch
Tempo Communications
Tempo Communications MM200 Bedienungsanleitung
