AMI Ecast View B75B Bedienungsanleitung

Page 1 of 8

26683851

REV. A

Ecast View B75B Motherboard Upgrade Kit

Kit #26683801

This kit will not support the Ecast View COIM Board. If your View core computer

has the Ecast View COIM board installed you must order the AMI Hardware

conversion Kit # 26683513.

Tools Required

#2 Phillips Head Screwdriver.

Parts Included with this Kit

Item # Part Number Description Quantity

1 40924214 B75B Motherboard 1

2 22219001 SATA Hard Drive (US) 1

3 40980802 Bracket SATA Mounting Adapter 1

4 22132253 Cable HD SATA Power 1

5 22132252 Cable HD SATA/DATA 1

6 34037946 Harness ATX Power Adapter 1

7 22132284 Harness Front Panel View (B75B) 1

8 22132280 Cable Assembly COM to I/O 1

9 80351604 Screws #4-40 x ¼ Phillip (Not Shown) 4

10 ST-06348 Screws #6-32 x ¼ Phillip (Not Shown) 4

These Instructions

Figure 1

Installation Instructions

Page 2 of 8

26683851

REV. A

Note: Installation of this kit will disable your serial credit card reader (if installed). If you

require a credit card reader, please call AMI Tech Support at 877-ROC-N-ROL to order a

new USB Encrypted Card Reader Kit for your jukebox.

1. Turn the jukebox off and unplug it from the wall outlet.

2. Unplug all the harness connections to the View core computer assembly and remove the

core computer from the jukebox.

3. Remove the Ecast hard drive from the core computer. This hard drive will not be reused.

Please return it to AMI.

4. Disconnect all of the cables from the AMI View I/O board. Route all of the cables thru

the access slots into the core computer chassis. Remove the (4) screws holding the I/O

board and its cover. Remove the (6) screws holding the chassis cover to access the

motherboard.

Figure 2

ECAST HARD

DRIVE

I/O BOARD

ACCESS

SLOTS CHASSIS

COVER

Page 3 of 8

26683851

REV. A

5. Before installing your B75B Motherboard confirm the “J1” jumper pins 1 and 2 are

shorted if you are converting a 19” touchscreen. If you are converting a 15” Touchscreen

the “J1” jumper pins 2 and 3 on the B75B motherboard must be shorted. See Figure 3.

Figure 3

6. Disconnect the (3) ribbon cables and the IDE hard drive cable, they will not be reused.

Disconnect the 20 pin ATX power supply connector as shown in Figure 4

7. Remove the (4) screws holding the motherboard and the I/O Shield to the core computer

chassis. The motherboard and the I/O Shield will not be reused.

Figure 4

IDE CABLE

RIBBON

CABLES

20 PIN

POWER

CONNECTOR

MOTHERBOARD

J1 HEADER

Page 4 of 8

26683851

REV. A

8. Position the new I/O Shield into the computer chassis and install the new B75B motherboard

(Item #1) using the (4) screws removed in step # 7.

9. Locate the Front Panel Harness (Item #7) labeled 22132284. Connect the (10) pin housing to

the “F-Panel” header of the B75B motherboard. See Figure 5.

10. Locate the COM to I/O cable (Item #8) labeled 22132280. Connect the (10) pin housing to

the “COM1” header of the B75B motherboard. See Figure 5.

11. Connect the 20 pin ATX power supply connector to the B75B motherboard. Locate the ATX

(4) Pin Adapter Harness labeled 34037946 (Item #11). Connect the (4) pin female housing to

the (4) pin male housing of the ATX power supply. Connect the (4) pin male housing to the

B75B motherboard as shown in Figure 5.

12. Connect the SATA/DATA Hard Drive cable (Item #5) to the SATA connector as shown in

Figure 5. Connect the HD SATA Power Cable (Item #4) to the remaining (4) pin ATX power

supply connector.

Figure 5

COM1

HEADER

F PANEL

HEADER

20 PIN ATX

CONNECTOR

4 PIN ATX

CONNECTOR

SATA/DATA

CONNECTOR

Page 5 of 8

26683851

REV. A

13. Carefully route the SATA/DATA and SATA power cables from the motherboard thru the

access slots for the hard drive. Route the remaining (4) pin ATX power cable, COM to I/O

and the front panel harnesses thru the access slots for the AMI View I/O board.

14. Check harness routing for pinch points or fan interference. Install the computer core cover

and AMI I/O board cover with the same screws removed in Step # 4.

15. Secure the SATA hard drive 22219001 (Item #2) to the SATA Mounting Adapter Bracket

40980802 (Item #3) using the (4) #4-40 x 1/4 screws 80351604 (Item #9) as shown in Figure

Figure 6

16. Install the adapter bracket and hard drive assembly to the Computer Core with (4) #6-32 x ¼

screws ST-06348 (Item #10) as shown in Figure 7. Connect the SATA power cable and the

SATA/Data Cable to the hard drive as shown in Figure 7.

Figure 7

HARD

DRIVE

#4-40 ¼ SCREWS

(TWO ON

EITHER SIDE) ADAPTOR

BRACKET

SATA/DATA

AND POWER

CONNECTIONS

HARD

DRIVE

ASSEMBLY

Page 6 of 8

26683851

REV. A

17. Connect the (4) pin ATX power supply housing to the header labeled “CN1 Power” on the

I/O Board. Connect the (20) pin housing of the front panel harness to the header labeled

“CN5 Core Control” on the I/O Board. Connect the (10) pin COM to I/O ribbon cable to the

header labeled “CN6 RS232” on the I/O Board as shown in Figure 8.

Figure 8

18. Double check that all harnesses are properly connected and all mounting screws are tight.

Reinstall the Computer Core back into the jukebox. Reconnect all harnesses to the AMI

View I/O board and touch screen cables removed in Step #4.

Power up Testing

19. Plug the jukebox back into the wall outlet then power up the jukebox to ensure the jukebox

UI comes up. This will take some time and may include one or more reboots.

20. In order for the jukebox to connect to the AMI network, the MAC address of the computer

core must be entered into the AMI database and the jukebox will have to be added to your

operating contract. This will require a phone call to the AMI Tech Support line, 1-877-ROC-

N-ROL (1-877-762-6765).

21. The MAC address is found on a Service Mode screen.

22. If the jukebox is not in the Service Mode, push the Activate Service Screen button on the

core computer I/O board.

23. Push the Calibrate Touch Screen button and calibrate the touch screen.

24. Touch Diagnostics then touch System Information. The MAC address will be displayed in

the third block down from the top right.

ATX POWER

FRONT

PANEL

COM to I/O

Page 7 of 8

26683851

REV. A

25. To help the AMI Tech Support technician configure your jukebox in the AMI system, please

have the jukebox model and serial number along with the MAC address when you call.

26. After Tech Support has entered the MAC address of the jukebox, you will need to enter the

Trigger Code.

27. From the main menu in the Service Mode, touch System Setup then touch Enable/Extend

Features.

28. Using the on-screen keypad, enter the trigger code found on the Trigger Code Card then

touch the Send Code button.

29. In order for the coin switches to work properly, you will have to adjust the coin setup on the

Cash Management – Song Pricing screen. For View kits that were installed in old Rowe CD

jukeboxes with 4 coin acceptors, use the coin setup shown in Figure 3. Otherwise, use the

Diagnostics – Credit Devices screen to discover which inputs are used for which coins then

configure the coin setup accordingly.

Figure 9

Page 8 of 8

26683851

REV. A

Inhaltsverzeichnis

Andere AMI Hauptplatine Handbücher

AMI

AMI EMB-B75B Bedienungsanleitung

AMI

AMI ATX-H310A Bedienungsanleitung

AMI

AMI IMBM-Q87A Bedienungsanleitung

AMI

AMI Kit-CJE B75B Bedienungsanleitung

AMI

AMI 410 Handbuch

AMI

AMI MI982 Bedienungsanleitung

AMI

AMI MB941 Bedienungsanleitung

AMI

AMI M920 Series Bedienungsanleitung

AMI

AMI MI946F Bedienungsanleitung

AMI

AMI MI890 Bedienungsanleitung

AMI

AMI Mark IV Screamer Bedienungsanleitung

AMI

AMI EMB-Q87A Bedienungsanleitung

AMI

AMI MI987 Bedienungsanleitung

AMI

AMI MB960 Bedienungsanleitung

AMI

AMI MI956 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung