AMOI LD42VM6E Bedienungsanleitung
USER MANUAL
LD42VM6E
LD47VM6E
5
1
6
2
8
9
Back Panel Description
Assemble the wall mount
Disassemble the side cover
Disassemble the bottom terminal cover
Safety Precautions
Important Safety Instructions
10
4
Front Panel Description
Overview of TV
Accessory List
11
12
Basic Operation(TV)
Remote Control Operation
Remote Control Overview (Teletext Functions)
Remote Control Overview (All Functions Except Teletext)
13
14-18
19
Menu Operation
Menu Description
20
20
21
Picture Menu
Sound Menu
Channel Menu
Window Menu
25
24
Setting Menu
PIP/PBP
28
29
DRE Menu
30
Teletext
31
Section of DTV
Preparation
Connection
31
Switching On
Contents
Contents
44
47
Common Interface
Maintenance
48
45
47
49
Using EPG
46
Digital Teletext
Troubleshooting And Maintenance
Display Mode
Troubleshooting
Specifications(TV/DTV)
34
39
Setting
System Setting
Channel Setting
41
Channel List
43
Favorite List
32
33
Remote Control
Menu
-1-
Safety Precautions
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the unit's cabinet that
may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the manual
accompanying the unit.
WARNING:
To prevent fire or electric shock, do not expose the
unit to rain or moisture. never attempt to open the
cabinet, dangerous high voltages are present in the
unit. refer servicing to qualified service personnel.
NOTE TO CABLE/TV INSTALLER:
Do not attempt to modify this product in any
way without written authorization from Amoi
Unauthorized modification, warranty will be
void.
CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RECORD YOUR MODEL NUMBER
(Do this now, while it is convenient)
The model and serial number of your Machine are
located on the back of the TV cabinet. For your
future convenience, we suggest that you record
these numbers here:
MODEL NO._____________________
SERIAL NO._____________________
DO NOT PLACE TO WET LOCATION
Apparatus shall not be exposed to dripping or
splashing with water, and do not place objects
filled with liquids on the apparatus, such as vases.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications.However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
When in use, there must be a distance at least
5cm between the TV and some object front or
back of it, at least 5cm between the TV and
some object leftward or rightward of it.
!
!
!
!
!
This equipment has been tested and found to
comply CE . These limits are
designed to provide reasonable protection
against harmful interference when the equipment is
operated in a residential installation.
regulation standard
-2-
Important Safety Instructions
1.Read These Instructions
All the safety and operating instructions should be
read before the product is operated.
2.Keep These Instructions
The safety and operating instructions should be
retained for future reference.
3.Adhered to all warning
All warnings on the product and in the operating
instructions should be adhered to.
4.Follow All Instructions
All operating and use instructions should be
followed.
5.Do not use this product near water
Do not use this product near water for example,
near a bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool;
and the like.
6.Clean only with dry cloth
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use dry cloth for cleaning.
7.Do not block any ventilation openings. Install in
accordance with the manufacturer instructions.
8.Do not install near any heat sources such as
radiators, heat register, stoves, or other apparatus
(including amplifiers) that produce heat
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades ,one blade is wider than the other. A
grounding type plug has two blades and third
grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11.Only use attachments and accessories specified
by the manufacturer.
12.Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, please
take caution when moving the cart to avoid injury
from tip-cover.
13.Unplug this apparatus during lightning or
unused for a long period of time.
14.Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15.This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your product dealer
or local power company.
16.Protective Attachment Plug
The product is equipped with an attachment plug
having overload protection. This is a safety
feature. See Instruction Manual for replacement
or resetting of protective device. If replacement of
the plug is required, be sure the service
technician has used a replacement plug specified
by the manufacturer that has the same overload
protection as the original plug.
17.Power Lines
An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system, extreme care should
be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
-3-
Important Safety Instructions
18.Overloading
Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result
in a risk of fire or electric shock.
19.Object and Liquid Entry
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result in
a fire or electric shock. Never spill any kind of liquid
on the product.
20.Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
21.Safety Check
Upon completion of any service or repairs to this
product, ask the service technician to perform
safety checks to determine that the product is in
proper operating condition.
22.Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling
only as recommended by the manufacturer. Any
mounting of the product should follow the
manufacturer instructions, and should use a
mounting accessory recommended by the
manufacturer.
23.Outdoor Antenna Grounding
If an outside antenna or cable system is connected
to the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode. See
figure below.
24.Please make sure the product is near enough
To the electrical outlet to make it easy of operation.
25.The product shall be connected to a mains
socket outlet with a protective earthing connection.
Screen Burn
A characteristic of Plasma and LCD TV Panels is
that displaying the same image for a long period of
time may cause a permanent after-image to remain
on the screen. This is called screen burn. Most
pictures shown on your TV will be constantly
moving and fill the screen.
Examples of images that you need to watch out for
are as follows (this is not an all-inclusive list):
1. Black Bars: If black bars appear at the left/right
or top/bottom of the screen it is recommended to
change the format so that the picture fills the entire
screen.
2. TV Channel Logos: e.g. Shopping channel logos
and pricing displays - especially if they are bright
and stationary. Moving or low-contrast graphics are
less likely to cause ageing of the screen.
3. PIP and Multipip: Do not view for long periods of
time using the PIP or Multipip functions.
4. Time Displays
5. Teletext: Do not view a stationary page for long
periods of time.
6. TV/DVD Menus: e.g. Listings of DVD disk
content.
7. Pause Mode: Do not leave the screen in pause
mode for long periods of time, e.g. When watching
DVDs or videos.
Note: Viewing any of the above phenomenon for a
long time may cause the Screen burn. To prevent it,
please reduce contrast and brightness of the image
while viewing. One burn-in occurs, after-image
will remain on the screen.
Accessory List
Power Cord (×1)
Note: Please use the power cord which includes the ground wire.
This TV set shall be connected to a main socket outlet with a protective grounded AC
power outlet.
Remote Control (×1)
Where to place the TV
1 Selecting where to place the TV.
Note:
• Select a place without direct sunlight but good ventilation
• Do not remove the stand from the display unless using a proper wall mount.
• Keep enough space above and behind the TV.
• The TV is heavy, make sure to move it .
.PictureA)
Picture B)
carefully
(
(
2. Handling the TV
2 inches
(5 cm)
or more
(Picture A) (Picture B)
-4-
User’s manual CD (×1)
and Quick Start(×1)
Quick Start
"AAA" size battery (×2)
SUB
SOURCE
PIP/PBP
INFO GUIDE FAV
DRE DTV/TV
DTV
SUBTITLE
AUDIO
TEXT
TV/RADIO
Front Panel Description
-5-
POWER
VOL+/-
CH+/-
MENU
SOURCE
Back Panel Description
1
13 15 16 17 18 19
23 4 5 6 9
7
12 14
810 11
Back Panel of model: LD42VM6E
Picture 1
Picture 2
Picture 3
Picture 1
Picture 2
Picture 3
1
11
20
26
2
12
14
21
27
3
13
22
28
4
23
5
6
16
15
7
17
18
24
8
9
10
19
25
SERVICE ONLY(A)
VGAAUDIO IN
OPTICAL OUT
VGA IN
COMMON INTERFACE
HEADPHONE
HDMI 3 IN
COAXIAL OUT
POWER
S-VIDEO IN
HDMI 4 IN
HDMI 1 IN
EXT 2
VIDEO IN
USB
HDMI 2 IN
ANALOG ANTENNA IN
USB
COMPONENT IN
DIGITAL ANTENNA IN
AUDIO IN-L/R
COMPONENT AUDIO IN
DIGITAL ANTENNA OUT
SERVICE ONLY(D)
POWER SWITCH
AV CVBS OUT
AV AUDIO OUT
EXT 1
-6-
21
20
22
23
24
25
27
26
28
Back Panel Description
Back Panel of model: LD47VM6E
12345
17 18 19
13 14 15 16
121110
9
876
Picture 1 Picture 2
Picture 1
Picture 2
EXT 1
AV CVBS OUT
EXT 2
ANALOG ANTENNA IN
COMMON INTERFACE
POWER
SERVICE ONLY(A)
OPTICAL OUT
COAXIAL OUT
1
2
3
4
5
6
7
8
9
11
12
13
10 HDMI 2 IN
COMPONENT IN
COMPONENT AUDIO IN
HDMI 1 IN
14 AV AUDIO OUT
VGAAUDIO IN
VGA IN
DIGITAL ANTENNA IN
DIGITAL ANTENNA OUT
SERVICE ONLY(D)
21
20
22
23
24
25
27
26
28
15
16
17
19
18
20
26
21
27
22
28
23
24
25
HEADPHONE
HDMI 3 IN
S-VIDEO IN
HDMI 4 IN
VIDEO IN
USB
USB
AUDIO IN-L/R
POWER SWITCH
-7-
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere AMOI LCD-Fernseher Handbücher
