Amprobe AC75B Bedienungsanleitung

CMY

AC75Bman_cover [Converted] copy.Page 1 8/18/2006 10:50:59 AM

AC75B

AC Digital Clamp Multimeter

Users Manual

•Mode d’emploi

•Bedienungshandbuch

•Manuale d’Uso

•Manual de uso

PN 2729024

July 2006

AC75B

AC Digital Clamp Multimeter

Users Manual

English

Limited Warranty and Limitation of Liability

Your Amprobe®product will be free from defects in material and

workmanship for 1 year from the date of purchase. This warranty does not

cover fuses, disposable batteries or damage from accident, neglect, misuse,

alteration, contamination, or abnormal conditions of operation or handling.

Resellers are not authorized to extend any other warranty on Amprobe®’s

behalf. To obtain service during the warranty period, return the product with

proof of purchase to an authorized Amprobe®Test Tools Service Center or

to a Amprobe®dealer or distributor. See Repair Section above for details.

THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES -

WHETHER EXPRESS, IMPLIED OR STAUTORY - INCLUDING IMPLIED

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR

MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL

NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the exclusion or

limitation of an implied warranty or of incidental or consequential damages,

this limitation of liability may not apply to you.

AC75B Clamp-on Multimeter

Contents

Safety Information ........................................................................................2

Symbols Used in this Manual........................................................................3

Introduction ..................................................................................................4

Making Measurements...............................................................................4

Additional Features ....................................................................................4

Product Maintenance ....................................................................................4

Maintenance...............................................................................................4

Cleaning.....................................................................................................4

Troubleshooting.........................................................................................5

Battery Replacement..................................................................................5

Repair ...........................................................................................................6

Specifications................................................................................................7

General Specifications................................................................................7

Environmental Specifications.....................................................................7

Electrical Specifications .............................................................................7

Safety Information

To ensure safe operation and usage of the meter, follow these instructions.

Failure to observe warnings can result in severe injury or death.

•To avoid possible electric shock or personal injury, follow these

guidelines:

•Do not use the meter if it is damaged. Before you use the meter,

inspect the case. Look for cracks or missing plastic. Pay particular

attention to the insulation surrounding the connectors.

•Inspect the test leads for damaged insulation or exposed metal.

Check the test leads for continuity.

•Replace damaged test leads before you use the meter.

•If this product is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be

impaired.

•Do not use the meter if it operates abnormally. Protection may be

impaired. When in doubt, have the meter serviced.

•Do not operate the meter around explosive gas, vapor, or dust.

•Do not apply more than the rated voltage, as marked on the meter,

between terminals or between any terminal and earth ground.

•Before use, verify the meter’s operation by measuring a known

voltage.

•When measuring current, turn off circuit power before connecting

the meter in the circuit. Remember to place the meter in series with

the circuit.

•Do not attempt to repair this meter. There are no user serviceable

parts.

•Use caution when working above 30 V ac rms, 42 V peak, or 60 V

dc. Such voltages pose a shock hazard.

•When using the probes, keep your fingers behind the finger guards

on the probes.

•Connect the common test lead before you connect the live test lead.

When you disconnect test leads, disconnect the live test lead first.

•Remove test leads from the meter before you open the battery door.

•Do not operate the meter with the battery door removed or

loosened.

•To avoid false readings, which could lead to possible electric shock

or personal injury, replace the batteries as soon as the low battery

indicator (N) appears.

•Only use a 9 Volt battery, properly installed in the meter case, to

power the meter.

•To avoid the potential for fire or electrical shock, do not connect the

thermocouple to electrically live circuits.

•Disconnect circuit power and discharge all high-voltage capacitors

before testing resistance,continuity, diodes, or capacitance.

Symbols Used in this Manual

N Battery WRefer to the manual

TDouble insulated XDangerous Voltage

FDirect Current JEarth Ground

BAlternating Current RAudible tone

;Conforms to relevant

Australian standards. )Canadian Standards

Association

(Canadian and US)

P Complies with EU

directives , Application around and

removal from HAZARDOUS

LIVE conductors is

permitted.

Introduction

The AC75B digital clamp-on multimeter, is a fully featured meter that also

measures temperature using a Type K probe (included). The AC75B has full

Category safety ratings and is CAT III, 600 V.

Making Measurements

Measurement Functions

•AC and DC Volts (V/v) See Figure -4-

•Resistance (O) See Figure -5-

•Diode/Continuity (G/C) See Figure –6-

•DC Current (DC μA) See Figure –7-

•Capacitance (P) See Figure –8-

•Temperature (°C/°F) See Figure –9-

•AC Current (a) See Figure –11-

Additional Features

Auto Power Off/Auto Power Off Disable See Figures -2- and –3-

The meter will automatically shut itself off after approximately 10 minutes

after power is turned on, or no activity has occurred with the meter. The

meter will beep when it turns off. Turn the rotary dial to reactivate the

meter.

The Auto Power Off feature can be disabled to keep the meter from going to

sleep. Press the BACKLIGHT button and then switch the rotary knob to

power on the meter.

Backlight See Figure -12-

The AC75B backlight illuminates the entire display for easy measurement

viewing in dark work environments. The backlight is activated for 60

seconds once the button is pressed.

HOLD Measurements See Figure -10-

The HOLD button allows the meter to capture and continuously display a

measurement reading. To use the HOLD feature, make a measurement,

when the reading has stabilized, press the HOLD button. The measurement

value will be captured on the display. Press the HOLD button again to

release the value.

Product Maintenance

Maintenance

Do not attempt to repair this meter. It contains no user serviceable parts.

Repair or servicing should only be performed by qualified personnel.

Cleaning

To clean the meter, periodically wipe the case with a soft moistened cloth.

To avoid damage to the plastic components do not use benzene, alcohol,

acetone, ether, paint thinner, lacquer thinner, ketone or other solvents to

clean the meter.

Troubleshooting

If the meter appears to operate improperly, check the following items first.

1. Review the operating instructions to ensure the meter is being used

properly.

2. Make sure the battery is in good condition. The low battery symbol N

appears when the battery falls below the level where accuracy is

guaranteed. Replace a low battery immediately.

Battery Replacement

To replace the battery

1. Turn the meter off and remove the test leads.

2. Loosen the screw and remove the battery door.

3. Replace the battery using an alkaline 9 V battery. See General

Specifications for detailed battery specifications.

4. Replace the battery cover and tighten the screw. Recycle the battery

using approved methods.

XWWARNING

To avoid electrical, shock remove the test leads from both the meter and

the test circuit before accessing the battery or the fuses.

Inhaltsverzeichnis

Sprachen:

Andere Amprobe Multimeter Handbücher

Amprobe

Amprobe AM-100 Bedienungsanleitung

Amprobe

Amprobe 5XP-A Bedienungsanleitung

Amprobe

Amprobe AM-52 Bedienungsanleitung

Amprobe

Amprobe AM50 Bedienungsanleitung

Amprobe

Amprobe KWC-2000 Bedienungsanleitung

Amprobe

Amprobe AM555 Bedienungsanleitung

Amprobe

Amprobe ACDC-400 Bedienungsanleitung

Amprobe

Amprobe AM-510-EUR Bedienungsanleitung

Amprobe

Amprobe AM-4B Bedienungsanleitung

Amprobe

Amprobe AM-34 Bedienungsanleitung

Amprobe

Amprobe AM-220 Bedienungsanleitung

Amprobe

Amprobe AM-510 Bedienungsanleitung

Amprobe

Amprobe HD160C Bedienungsanleitung

Amprobe

Amprobe AM-6B Bedienungsanleitung

Amprobe

Amprobe ac68C Bedienungsanleitung

Amprobe

Amprobe AM-250 Bedienungsanleitung

Amprobe

Amprobe ACD-11 Bedienungsanleitung

Amprobe

Amprobe 38XR-A Bedienungsanleitung

Amprobe

Amprobe ACD-14 PLUS Bedienungsanleitung

Amprobe

Amprobe HD110C Bedienungsanleitung

Amprobe

Amprobe AM535 Bedienungsanleitung

Amprobe

Amprobe ACD-14-PRO Bedienungsanleitung

Amprobe

Amprobe HD160C Bedienungsanleitung

Amprobe

Amprobe 34XR-A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung