Amprobe IR608A Bedienungsanleitung

IR608A

Infrared Thermometer

User Manual

• Mode d’emploi

• Bedienungshandbuch

• Manual de uso

• Manuale d’Uso

• Anvandärhanbok

Ie^Zl^K^\r\e^

Visit www.Amprobe.com for

• Catalog

• Application notes

• Product specifications

• User manuals

IR608A

Infrared Thermometer

User Manual

!Mode d’emploi

!Bedienungshandbuch

!Manual de uso

!Manuale d’Uso

!Anvandärhanbok

PN 2461571

March 2007

IR608A_all.pdf 1 3/14/2007 2:06:36 PM

• Laser

• Láser

• Laser

• Display

• Anzeige

• Affichage

• Pantalla

• Display

• Trigger

• Messtaste

• Gâchette

• Gatillo

• Gatilho

• Battery Compartment

• Batteriefach

• Boîtier piles

• Compartimento de las pilas

• Compartimento de bateria

• Battery Cover

• Batterieabdeckung

• Couvercle du boîtier pile

• Tapa de las pilas

• Tampa da bateria

• ˚C/˚F Switch

• ˚C/˚F-Schalter

• Commutateur ˚C/˚F

• Interruptor de ˚C/˚F

• Chave ˚C/˚F

• Serial Number Label

IR608A_all.pdf 2 3/14/2007 2:06:37 PM

IR608A

Infrared Thermometer

User Manual

!Mode d’emploi

!Bedienungshandbuch

!Manual de uso

!Manuale d’Uso

!Anvandärhanbok

English

IR608A_all.pdf 3 3/14/2007 2:06:37 PM

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and

workmanship for 1 year from the date of purchase. This warranty

does not cover fuses, disposable batteries or damage from

accident, neglect, misuse, alteration, contamination, or abnormal

conditions of operation or handling. Resellers are not authorized

to extend any other warranty on Amprobe’s behalf. To obtain

service during the warranty period, return the product with proof

of purchase to an authorized Amprobe Test Tools Service Center

or to an Amprobe dealer or distributor. See Repair Section for

details. THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER

WARRANTIES - WHETHER EXPRESS, IMPLIED OR STAUTORY -

INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A

PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY

DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR

ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY. Since some states or countries do not allow the

exclusion or limitation of an implied warranty or of incidental or

consequential damages, this limitation of liability may not apply

to you.

IR608A_all.pdf 4 3/14/2007 2:06:37 PM

Contents

Symbols...............................................................................1

Introduction.........................................................................2

Specifications ......................................................................2

How it Works.......................................................................3

How to Operate the Unit ......................................................3

C/F and Battery..............................................................3

Operating the Unit .........................................................3

Display...........................................................................3

How to Accurately Measure Temperature............................3

Locating a Hot Spot.......................................................3

Field of View ..................................................................4

Distance and Spot Size..................................................4

Reminders.....................................................................4

Emissivity ............................................................................4

Maintenance ........................................................................4

Troubleshooting ..................................................................5

CE Certification ....................................................................5

Repair ..................................................................................5

Symbols

!" Refer to the manual

"Battery

#" Complies with EU

directives "

!Warning

Do not point laser directly at eye or indirectly off

reflective surfaces.

IR608A_all.pdf 5 3/14/2007 2:06:37 PM

Cautions

All models should be protected from the

following,

!EMF (electro-magnetic fields) from arc

welders, induction heaters

!Static electricity

!Thermal shock (caused by large or abrupt

ambient temperature changes—allow 30

minutes for unit to stabilize before use)

!Do not leave the unit on or near objects of

high temperature

••••••

Introduction

We are confident you will find many uses for your handheld

noncontact thermometer. Compact, rugged, and easy to use—

just aim, pull the trigger, and read current surface temperatures

in less than a second. You can safely measure surface

temperatures of hot, hazardous, or hard-to-reach objects without

contact.

Specifications

Note

Specifications subject to change without notice.

Temperature range.............. -18 to 400 °C (0 to 750 °F)

Temperature display.................. °C or 0.5 °F

Accuracy (assumes ambient operating temperature of 23 °C [73

°F]) For targets at:

-1 to 400 °C (30 to 750 °F) ....... ±2% of reading or ± 2 °C (± 3.5

°F), whichever is greater

-18 to -1 °C (0 to 30 °F): ........... ±3 °C (±5 °F) at 23 °C (73 °F)

±2 ºC (±3.5 ºF)

Repeatability..................... ± 2 % of reading, or ± 2 °C

(±3 °F)

Response time ................... 500 mSec, 95% response

Spectral response...................... 7–18 µm

Emissivity......................... pre-set 0.95

IR608A_all.pdf 6 3/14/2007 2:06:38 PM

Ambient operating range.......... 0 to 50 °C (32 to 120 °F)

Relative humidity................ 10–95 % RH noncondensing, @

up to 30°C (86°F)

Storage temperature ............ - 20° to 65°C (-4° to 150°F)

without battery

Weight / Dimensions............ 227 g (0.5 lb); 152 x 101 x 38

mm (6 x 4 x 1.5 in)

Power.............................. 9V Alkaline or NiCd battery

Typical Battery life (Alkaline) ..... 12 hrs

Distance to Spot Size................. 8:1

How it Works

Infrared thermometers measure the surface temperature of an

object. The unit’s optics sense emitted (E), reflected (R), and

transmitted (T) energy, which is collected and focused onto a

detector. The unit’s electronics translate the information into a

temperature reading which is displayed on the unit.

How to Operate the Unit

C/F and Battery

Pull open the unit’s handle using the finger indents near the

trigger to access the C/F switch or to insert/remove the battery.

To toggle between °C and °F, push the switch (A). Insert the 9v

battery positive side first into the battery compartment.

NOTE

The battery door is detachable.

Operating the Unit

To measure a temperature, point unit at object and pull the

trigger. Be sure to consider distance-to-spot size ratio and field

of view. If the unit is equipped with a laser, use the laser only for

aiming. See How to Accurately Measure Temperatures.

Display

The backlit LCD displays the current temperature in Celsius or

Fahrenheit. The unit will hold the reading for 7 seconds after

trigger is released; the word HOLD appears. The presence of the

battery icon indicates a low battery (B).

How to Accurately Measure Temperature

Locating a Hot Spot

To find a hot spot aim the thermometer outside the area of

interest, then scan across with an up and down motion until you

locate the hot spot.

IR608A_all.pdf 7 3/14/2007 2:06:38 PM

Field of View

Make sure that the target is larger than the unit’s spot size. The

smaller the target, the closer you should be to it. When accuracy

is critical, make sure the target is at least twice as large as the

spot size.

Distance and Spot Size

As the distance (D) from the object increases, the spot size (S) of

the area measured by the unit becomes larger.

Reminders

Not recommended for use in measuring shiny or polished metal

surfaces (stainless steel, aluminum, etc.). See Emissivity.

The unit cannot measure through transparent surfaces such as

glass. It will measure the surface temperature of the glass

instead.

Steam, dust, smoke, etc., can prevent accurate measurement by

obstructing the unit’s optics.

Emissivity

Most organic materials and painted or oxidized surfaces have an

emissivity of 0.95 (pre-set in the unit). Inaccurate readings will

result from measuring shiny or polished metal surfaces. To

compensate, cover the surface to be measured with masking

tape or flat black paint. Allow time for the tape to reach the same

temperature as the the material underneath it. Measure the

temperature of the tape or painted surface.

Maintenance

Lens Cleaning: Blow off loose particles using clean compressed

air. Gently brush remaining debris away with a camel's hair

brush. Carefully wipe the surface with a moist cotton swab. The

swab may be moistened with water.

Note

DO NOT use solvents to clean the plastic lens.

Case Cleaning: Use soap and water on a damp sponge or soft

cloth.

Note

DO NOT submerge the unit in water.

IR608A_all.pdf 8 3/14/2007 2:06:38 PM

Troubleshooting

Code Problem Action

---(on display)

Target temperature

is over or under

range

Select target

within

specifications

Battery icon

appears

Possible low

battery

Check and/or

replace battery

Blank display Possible dead

battery

Check and/or

replace battery

Laser doesn’t work Low or dead

battery Replace battery

CE Certification

#This instrument conforms to the following

standards

EN 61326-1 Electromagnetic Emissions and Susceptibility

EN 61010-1 General Safety

EN 60825-1 Laser Safety

Between approximately 250Mhz and 800 Mhz at 3V/m, the

instrument may not meet its stated accuracy.

Repair

All test tools returned for warranty or non-warranty repair or for

calibration should be accompanied by the following: your name,

company’s name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with

the meter. Non-warranty repair or replacement charges should

be remitted in the form of a check, a money order, credit card

with expiration date, or a purchase order made payable to

Amprobe® Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery

before requesting repair. During the warranty period any

defective test tool can be returned to your Amprobe® Test Tools

distributor for an exchange for the same or like product. Please

check the “Where to Buy” section on www.amprobe.com for a

list of distributors near you. Additionally, in the United States and

Canada In-Warranty repair and replacement units can also be

sent to a Amprobe® Test Tools Service Center.

IR608A_all.pdf 9 3/14/2007 2:06:38 PM

Andere Handbücher für IR608A

Inhaltsverzeichnis

Sprachen:

Andere Amprobe Thermometer Handbücher

Amprobe

Amprobe IR607A Bedienungsanleitung

Amprobe

Amprobe TM45A Bedienungsanleitung

Amprobe

Amprobe IR-450 Bedienungsanleitung

Amprobe

Amprobe IR-712 Bedienungsanleitung

Amprobe

Amprobe TMD-51 Bedienungsanleitung

Amprobe

Amprobe IR-750-EUR Bedienungsanleitung

Amprobe

Amprobe RTD-10 Bedienungsanleitung

Amprobe

Amprobe TMD-52 Bedienungsanleitung

Amprobe

Amprobe IR-750 Bedienungsanleitung

Amprobe

Amprobe TMD-56 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Amprobe

Amprobe 4308539 Bedienungsanleitung

Amprobe

Amprobe TPP1-F1 Bedienungsanleitung

Amprobe

Amprobe IR-450 Bedienungsanleitung

Amprobe

Amprobe TMD-50 Bedienungsanleitung

Amprobe

Amprobe DT-130 Bedienungsanleitung

Amprobe

Amprobe TMD-55 Bedienungsanleitung

Amprobe

Amprobe TMD90A Bedienungsanleitung

Amprobe

Amprobe TMD-50 Bedienungsanleitung

Amprobe

Amprobe IR608A Bedienungsanleitung

Amprobe

Amprobe IR-710 Bedienungsanleitung

Amprobe

Amprobe TMD-53 Bedienungsanleitung

Amprobe

Amprobe 560IR710 Bedienungsanleitung

Amprobe

Amprobe IR608A Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Microlife

Microlife NC 200 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung