AMS DERBY 9C HOME Bedienungsanleitung

Rev. 16.04.01

DERBY 9C HOME

User Manual / Instrucciones de Usuario

1. Safety Instructions

WARNING

Please keep this User Manual for future consultation. If you sell the fixture to another

user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using the fixture.

It’s important to ground the yellow/green conductor to earth in order to avoid electric

shock.

Disconnect main power before servicing and maintenance.

Maximum ambient temperature is Ta : 40℃. Don’t operate it where the temperature is

higher than this.

In the event of serious operating problem, stop using the fixture immediately. Never try

to repair the fixture by yourself. Repairs carried out by unskilled people can lead to

damage or malfunction. Please contact the nearest authorized technical assistance

center. Always use the same type spare parts.

Do not connect the device to any dimmer pack.

Do not touch any wire during operation and there might be a hazard of electric shock.

To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain

or moisture.

The housing must be replaced if they are visibly damaged.

Do not look directly at the LED light beam while the fixture is on.

There are no user serviceable parts inside the fixture. Do not open the housing or

attempt any repairs by yourself. In the unlikely event your fixture may require service,

please contact your nearest dealer.

Due to the magnifying type lens, please keep the lens out of contact with direct sunlight.

Direct sunlight can cause heat to build up inside of the unit, which will seriously damage

unit.

Please read the instructions carefully which includes important

information about the installation, operation and maintenance.

DERBY 9C HOME User Manual/Manual de uso P 1

2. Technical Specifications

Featuring 9 LEDs RGBW, 3W each

Each color of R, G, B, W can be controlled individually.

DMX 8 channels

Smooth 0~100% dimming and variable strobe speeds.

Operation modes: DMX, Mater/Slave mode, audio, remote

Ideal for discotheques, clubs, bars, parties, Mobile DJs, ect.

Input Voltage: AC 220V~240V 50/60Hz

Beam angle : 160ºx120º (HxV)

LED: 9 LEDs RGBW, 3W each

Dimension

Weight

235

1,5 kg

x 235 x 235 mm

3. Installation

The unit should be mounted via its screw holes on the handle. Always ensure that the

unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the

structure to which you are attaching the unit is secure and is able to support a weight of 10

times of the unit’s weight. Also always use a safety cable that can hold 12 times of the

weight of the unit when installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place where is

out of the touch of people and has no one pass by or under it.

DERBY 9C HOME User Manual/Manual de uso P 2

4. Setting the unit

4.1Rear Panel

4.2 Main Function

To select any functions, press MENU button until the required one is shown on the display.

Select the function by ENTER button and the display will blink. Use DOWN and UP button to

change the mode. Once the required mode has been selected, press ENTER button to

setup . Back to the functions without any change press MENU button. The main functions

are shown below:

DERBY 9C HOME User Manual/Manual de uso P 3

1 . DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.

2. Display: To show the various menus and the selected functio

3.Menu To select the program functions

4.Up To go forward in the selected functions

5.Down To go backword in the selected functions

6.Enter To confirm the selected funtions

7. Mains input：Connect to supply mains power.

8. DMX output：For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.

5. Controlling The Unit

You can operate the unit in three ways:

1. By master/slave built-in preprogram function

2. By DMX controller

3. By external sound running the preprogram fuction

5.1 Master/Slave Built In Preprogrammed Function

By linking the units in master/slave connection, the first unit will control the other units to

give an automatic, sound activated, synchronized light show. This function is good when you

want an instant show. You have to set the first unit in Automatic,sound activated mode . Its

DMX input jack will have nothing plugged into it.

Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave led lights will

constantly on.

DERBY 9C HOME User Manual/Manual de uso P 4

DERBY 9C HOME User Manual/Manual de uso P 5

6. DMX512 Value

DERBY 9C HOME User Manual/Manual de uso P 6

1. Instrucciones de seguridad

AVISO

Por favor, lea las instrucciones cuidadosamente, incluyen

información importante sobre la instalación, manejo y

mantenimiento de la unidad

Por favor, conserve este manual de uso para futuras referencias junto con la unidad.

Desembale y compruebe cuidadosamente que no se han producido daños durante el

transporte antes de usar la unidad.

Es importante conectar el cable amarillo/verde a tierra con el fin de prevenir descargas

eléctricas.

Desconecte la alimentación antes de repararlo o limpiarlo.

La temperatura ambiente máxima es Ta: 40ºC. No opere la unidad en lugares con una

temperatura superior.

En caso de serios problemas de uso, deje de usar la unidad de inmediato. Nunca

trate de repararla por si mismo. Las reparaciones llevadas a cabo por personal no

autorizado, pueden ocasionar daños o mal funcionamiento. Por favor, contacte con su

distribuidor para obtener asistencia técnica. Use siempre los repuestos autorizados.

No conecte la unidad a un dimmer.

No toque el cableado mientras esté conectado para evitar descargas eléctricas

Para prevenir el riesgo de descargas eléctricas o fuego, no exponga la unidad a la lluvia

o la humedad.

La carcasa externa debe ser sustituida si se aprecian daños

No mire directamente la luz producida por los LED mientras la unidad está en marcha.

No hay elementos de control para el usuario en el interior. No abra la carcasa o trate

de repararla por usted mismo. En el caso de que necesite ser reparada, contacte con

su distribuidor.

Debido a la precisión de las lentes, por favor, evite que entren en contacto con la luz

solar directa.

DERBY 9C HOME User Manual/Manual de uso P 7

2. Especificaciones Técnicas

Incorpora 9 LEDs RGBW de 3W C.U.

Cada color R, G, B, W puede ser controlado de manera individual

Modo DMX: 8 canales

Suave dimmerización 0~100% con velocidad de strobo variable.

4 modos de funcionamiento: DMX, Mater/Slave, audio, mando remoto

Ideal para discotecas, clubs, salas de fiesta, DJ móviles, etc

Alimentación : AC220V~240V 50/60Hz

3. Instalación

La unidad debe ser montada aprovechando los puntos situados en las asas. Asegúrese de

fijarlo firmemente para evitar vibraciones o su caida durante el funcionamiento. Asegúrese

siempre que la estructura donde va a fijarlo es capaz de soportar hasta 10 veces el peso

del dispositivo.

Utilice en todo momento, un cable de seguridad capaz de soportar 12 veces el peso de la

unidad.

La unidad debe ser instalada por profesionales y fijado en un lagar fuera del alcance de

la gente.

DERBY 9C HOME User Manual/Manual de uso P 8

Angulo del haz : 160ºx120º (HxV)

LED: 9 LEDs RGBW, 3W c.u.

Dimensiones

Peso

235

1,5 kg

x 235 x 235 mm

Inhaltsverzeichnis

Sprachen:

Andere AMS Leuchte Handbücher

AMS

AMS LASER HOME BALL Bedienungsanleitung

Beliebte Leuchte Handbücher anderer Marken

Emos

Emos CLASSIC ZY1431T Bedienungsanleitung

Westinghouse

Westinghouse Outdoor Lighting Fixture Bedienungsanleitung

Hedler

Hedler C 12 silent Bedienungsanleitung

Blizzard Lighting

Blizzard Lighting Puck: CSI Bedienungsanleitung

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Bedienungsanleitung

Lightmaxx

Lightmaxx Shaft 5R Bedienungsanleitung

Triarch

Triarch 31083 Bedienungsanleitung

Philips

Philips 32614 Series Bedienungsanleitung

IKEA

IKEA TIVED Bedienungsanleitung

Lightolier

Lightolier LP200 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Bedienungsanleitung

Martin

Martin MAC 250 Krypton Bedienungsanleitung

Cooper Lighting

Cooper Lighting Halo L3232E Bedienungsanleitung

Stageline

Stageline ODW-2410RGBW Bedienungsanleitung

Light Sky

Light Sky Tornado Series Bedienungsanleitung

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Bedienungsanleitung

Lightolier

Lightolier Lytespan 83ED17S Bedienungsanleitung

Lightolier

Lightolier Calculite CS8226 Bedienungsanleitung