EWP-202C
WIRELESS ANNUNCIATOR SYSTEM
Potter Electric Signal Co., LLC • St. Louis, MO •Cust Service: 866-240-1870 • Tech Support:866-956-1211• Canada 888-882-1833•www.pottersignal.com
• Advanced dual-infrared beam and superior wireless technology
• Wireless multi-function receiver
• Dual channel receiver with status LED’s
• 20 ft. detection range across doorway
• Independent entry/exit counters
• 200 ft. wireless RF transmission in open eld
• 2 selective chime sounds per channel
• Chime volume control
• Resettable 6-digit counter (up to 999999)
• Power failure memory back-up
• Wireless push-button included
• 16 million I.D. codes system
The EWP-202C is a two channel wireless annunciator system designed with a superior dual counter and active infrared technology. It delivers
a pleasant chime along with a recorded count. It emits a continuous, invisible dual beam across the doorway to the reector. When either beam
is interrupted, it announces the entrance or exit of customers with a pleasant, distinguishable chime sound. Each event is counted, recorded, and
registered by the built-in digital counter and can be viewed and compared later in both modes. The annunciator is also equipped with an alert
mode that sounds the built-in siren when triggered, adding additional security. This is ideal for malls, ofce buildings, liquor stores, warehouses,
parking structures, medical ofces, and more.
Complete Kit Includes:
1 Infrared sensor/transmitter
1 Wireless receiver with built-in chime and counter
1 Wireless push-button
1 Reector
2 Power transformers (12V AC 20VA)
1 Long plastic bracket
1 Short metal bracket
2 Short plastic brackets
2 6 ft. power cords with in-line switch
6 3/4” sheet metal screws
1 1/2” bolt with locking washer
4 1 1/4” machine screws with washer and nut
2 1/2” sheet metal screws
Application
Wireless Receiver
Keeps count on all incoming and outgoing customers and retains
it in memory.
PAGE 1 OF 2
PRINTED IN USA
Stock number: 4130003
MKT. #8850052 - REV B
2/10
