www.amtelectronics.com www.amtelectronics.com
1 1
AMT M2 - Legend Amps
two-channel guitar preamp
Safety instructions
WARNING! Inside the device there are no parts that are user-serviceable. Repairs
to the machine may only be performed by qualified personnel.
WARNING! To avoid failure, the device should not be exposed to rain or moisture
inside the device must not be exposed to water or other liquid. Do not place near
filled with liquids, such as vases, etc.
Please read the instruction manual carefully.
1. Keep the manual.
2. Heed all warnings.
3. Follow all instructions.
4. To clean the unit, use a dry cloth, first unplug the appliance
and unplug it from the power adapter.
5. Do not install near any heat sources or expose to direct
sunlight.
6. Place the power cord so that it can not be stepped on, and
avoid its contact with sharp corners, etc. In that case, if the
plug or socket adapter is used to disconnect the unit from the
network, they must be easily accessible.
7. Only use attachments and accessories recommended by
manufacturer.
8. Unplug the AC adapter (when using the AC adapter) during a
thunderstorm.
9. When not in use for a long time, remove the battery from the
device case.
10. All work associated with the repair of the device must be
performed by qualified service personnel.
11. WARNING! These service instructions are for use by qualified
personnel. Do not carry out any repair work not described in
the instruction manual. Repairs must be performed by qualified
personnel.
IMPORTANT NOTICE!
Violation following instructions can cause damage to your DEVICE. DAMAGE
ARISING will void your warranty.
When transporting or storing the product in the freezing
temperatures, before turning on leave the device at room
temperature in its original packaging within 2 hours, no less!
To connect the preamp to other devices, use only the
cables intended for such connections.
Do not use other cables, such as acoustic, etc.
Before you start
To ensure the safe transportation of the device was carefully packed at the
factory. However, if the box is damaged inspect the unit immediately for signs
of damage..
If you see damage do not sent directly to the address of
the manufacturer, but notify your dealer and the shipping
company, otherwise you will lose the right to
compensation.
Only use attachments and accessories recommended by
manufacturer.
Connecting the preamp to the power adapter:
The connection is made only after all the audio
connections!
Before connecting the preamp to the power adapter, make
sure that the case, connection cable, and plug the AC
adapter are not damaged: no cuts, cracks, dents, etc. and
are in good condition.
To connect the preamp to the AC adapter, insert the low-
voltage connector adapter into the jack on the right panel
of the preamp, and then plug the adapter into the wall
outlet.
Disconnecting the preamp from the power adapter:
To disconnect the preamp from the AC adapter, disconnect
the AC adapter from the power outlet, and then disconnect
the low-voltage connector from the socket on the right-
hand panel of the preamp.
To prevent damage during storage and transport use the
original packaging.
Do not let children play with the packaging.
Please dispose of all packaging materials in an
environmentally friendly way.
To avoid overheating of the device is provided with
sufficient ventilation, do not cover it, and do not place near
heating radiators etc.
Operation near powerful radio transmitters and high-
frequency sources can lead to a marked deterioration in
sound quality. In this case, increase the distance between
the sensor and the transmitter and use shielded cables for
all connections.
WARNING!
Please note that high volume can damage your hearing and / or
damage to the dynamic head of your speaker system. Before
switching on the unit, turn knobs «Volume» to the left (counter
clockwise). Always make sure that volume is moderated.
What’s in the package:
The package includes following products:
1. Guitar preamp 1pc.
2. User’s manual 1pc.
3. Cardboard box 1pc.
4. Warranty Card 1pc.
Introduction.
Classic mid-gain overdrive became popular in the 80 with amp
Marshall JCM800, preamp-section which provides a rich
