Analog way Axion2 Bedienungsanleitung
version 1.20
USER MANUAL
Axion2
Thank you for choosing Analog Way and the Axion2. By following these simple steps, you will be able to obtain
the most from your powerful remote controller within minutes. Discover the Axion2’s extensive capabilities
EKS500/400,
OPS300/200, PLS300/200, SVU300/200, SMX200/100, SQD200, STE100 or DVX8044, unleash all your
creativity for a new experience in show and event management by Analog Way.
THANK YOU
TABLE OF CONTENTS 1
INTRODUCTION 5
1-1. WHAT IS THE AXION2
1-2. USEFUL TERMS AND DEFINITIONS
1-3. AXION2 COLOR CODES
7
HARDWARE INSTALLATION
2-1. SAFETY INSTRUCTIONS
2-2. UNPACKING AND INSPECTION
2-3. THE AXION2 REAR PANEL
2-4. HARDWARE SPECIFICATIONS
Screens
Presets
Layers
Environmental specications
Frames & Backgrounds
PIP (Picture in Picture)
Keying & Titling
1
OPERATING THE AXION2 14
3-1. AXION2 FRONT PANEL
4-1. OPERATIONAL CONFIGURATION
5-1. USING THE JOYSTICK
5-2. LAYER SETTINGS
4-2. SHOW SETTINGS
STARTING WITH THE AXION2 17
OPERATING THE AXION2 24
2
Touch screen
Overview
Settings section
Layout section
Preset Edition section
User conguration
Screen setup
Layer Settings
Snap Function
Video Out conguration
Source conguration
Screen section
System conguration
Edit devices
Managing with the Axion2
Element Settings
Input conguration
Soft Edge setup
Viewer zoom
Logos & Frames conguration
Main/Preview section
Timing knob
Transition section
Sequence section
Show conguration
Output conguration
Source Settings
Audio conguration
Image settings
Controls menu
Preset Memory section
5-3. LIVE BACKGROUND
Adding a Live Background
Clearing a Live Background
User Effects
5-4. FRAME BACKGROUND
5-5. WORKING WITH PIPs
5-6. WORKING WITH LOGOS
5-7. WORKING WITH PRESET MEMORIES
5-8. WORKING WITH TRANSITIONS
6-1. MATRIX SETUP
7-1. ABOUT EXAMPLES
6-2. MATRIX CONFIGURATION
6-2. MATRIX SETUP EXAMPLE
6-3. MATRIX ROUTERS
7-2. EXAMPLES
WORKING WITH A MATRIX
EXAMPLES AND TIPS
38
41
3
Adding a Frame Background
Clearing a Frame Background
Adding a PIP
Adding a logo
Loading a Preset Memory
Manipulating a PIP
Manipulating a logo
Take
Reload Memory from Main
Clearing a PIP
Clearing a logo
Step back
Selecting a PIP
Selecting a logo
Saving a Preset Memory
Programming a Preset
T-Bar
Accessing Memory pages
Working with a Sequence
Working with the Screen Filter
Improved Multiscreen Control
Take Cut
Timing
SOFT EDGE BLENDING 44
7-1. SOFT EDGE BLENDING
HOW TO CONTACT US
INFORMATION REGARDING UNIT DISPOSAL
CONTACT INFORMATION 48
WARRANTY AND SERVICES INFORMATION 47
9-1. ANALOG WAY LIMITED WARRANTY
9-2. SERVICES AND RMA
8-1. SOFT EDGE SETUP
8-2. SOFT EDGE CONFIGURATION
4
Axion2 is a powerful intuitive and ergonomic remote controller designed to manage several switchers,
independently or simultaneously in any kind of combination, including Soft Edge Blending.
Axion2
Axion2 controls
the effects and functionalities of several seamless switchers.
* TIP * :Axion2 can control matrices in order to multiply the number of live sources, whatever the number of
Analog Way switcher inputs you are using.
Axion2 is especially dedicated to
of your events can be saved for future use.
With its new Human Machine Interface, Axion2 will help to manage multi-screen and multi-location live
presentations with total peace of mind.
SCREENS: a Screen on the Axion2
Screen generaly contains a device, such as a Di-VentiX II, an OPS300, OPS200, Pulse, Pulse LE, SmartVu
or
for example.
PRESET: a Preset on the Axion2
allow to record or recall the state of sources and elements in a Screen at any given moment.
LAYERS:
visual priority — either in front of or behind another layer.
BACKGROUND FRAME: a Background Frame is a full screen image which is selected from one of the
computer source plugged into the machine.
BACKGROUND LIVE:
which is selected from one of the available sources of the slave device.
INTRODUCTION
1-1. WHAT IS THE AXION2
1-2. USEFUL TERMS AND DEFINITIONS
5
The Axion2 buttons were designed with a handy color code to guide you, avoid mistakes, and give a constant
status of the device. Thus, all Axion2
their function and their current state.
green, other than the Source Main buttons
which light up in red.
Axion2 becomes bright yellow.
The button is indicated in red, and will blink red when active.
The Axion2
yellow
Finally, some of the Axion2 for example) will turn pale yellow when they have
been selected, are active, but are not currently being worked with.
PIP:
background image or another PIP. PIPs can be reduced, enlarged, bordered and shadowed. They can overlap
one another, depending on their visual priority.
LOGO:
KEYING & TITLING:
1-3. AXION2 COLOR CODES
6
CAUTION:
for further reference. Please follow all the warnings regarding this product and its operating instructions.
• WARNING:
for ventilation and to avoid overheating. Make sure the device is never placed near a textile surface that
• POWER:
a grounding plug should only be used with a grounding type outlet. In no way should this grounding be
• POWER CORD:
the main switch.
Caution:
main power.
:
accessible and located outside the unit.
- The outlet should always be near the device and easily accessible.
- Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them.
may expose your device to electric shocks or other hazards. Verify the condition of the power supply cords
once in a while. Contact your dealer or service center for replacement if damaged.
• CONNECTIONS:
• SERVICING: Do not attempt to service this product yourself by opening or removing covers and screws
service personnel.
• OPENINGS:
technician.
HARDWARE INSTALLATION
SAFETY INSTRUCTIONS
2-1. SAFETY INSTRUCTIONS
7
consignes de sécurité et de fonctionnement de l’appareil avant utilisation. Conservez les instructions de
• ATTENTION:
• INSTALLATION:
fonctionnement et un accident.
• ALIMENTATION:
• CORDON D’ALIMENTATION:
mise en tension et la mise hors tension se fait en actionnant cet interrupteur général. Attention: le cordon
d’alimentation constitue le seul moyen de débrancher l’appareil totalement de l’alimentation secteur.
- Débrancher le cordon d’alimentation de la prise murale si vous prévoyez de ne pas utiliser
Si le cordon d’alimentation est endommagé, débranchez-le immédiatement de la prise murale. Il est
revendeur ou le service après-vente pour un remplacement.
• CONNEXIONS:
• RÉPARATION ET MAINTENANCE: L’utilisateur ne doit en aucun cas essayer de procéder aux opérations
de dépannage, car l’ouverture des appareils par retrait des capots ou de toutes autres pièces constituant
• OUVERTURES ET ORIFICES:
INSTRUCTIONS DE SECURITE
8
Andere Handbücher für Axion2
1
Inhaltsverzeichnis
Andere Analog way Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
