AnaPico APSYN Bedienungsanleitung

User’s Manual – Signal Source Models – v3.05 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

User’s Manual V3.05

Signal Source Models

APSIN, APSYN, APMSYN, APGEN, APMS, APULN

Page 1 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

MANUFACTURER ADDRESS

AnaPico AG

Europa-Strasse 9

8152 Glattbrugg

Switzerland

Tel.:+41 44 440 00 50

e-mail: support@anapico.com

Website: www.anapico.com

WARRANTY

All AnaPico instruments are warranted against defects in material and workmanship for a period of two years from the

date of shipment. AnaPico will, at its option, repair or replace products that prove to be defective during the warranty

period, provided they are returned to AnaPico and provided the preventative maintenance procedures are followed.

Repairs necessitated by misuse of the product are not covered by this warranty. No other warranties are expressed or

implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose. AnaPico is

not liable for consequential damages. The warranty on the internal rechargeable batteries (option B3) is one year from

the date of shipment. Battery replacement is available through AnaPico and its distributors.

IMPORTANT! PLEASE READ CAREFULLY

This manual is copyright by AnaPico AG and all rights are reserved. No portion of this document may be reproduced,

copied, transmitted, transcribed, stored in a retrieval system, or translated in any form or by any means such as

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without written permission of AnaPico AG.

Page 2 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

Table of Contents

GENERAL REMARKS ................................................................................................................................................5

VALIDITY OF THIS MANUAL ...................................................................................................................................... 5

AVAILABLE CASING ................................................................................................................................................. 5

Compact Portable Case (CPC)....................................................................................................................... 5

1U Rackmount (1URM)................................................................................................................................. 5

1U Case (1URM)............................................................................................................................................ 6

Desktop Case (LH)......................................................................................................................................... 6

Module.......................................................................................................................................................... 6

DATA CONNECTIONS............................................................................................................................................... 7

SIGNAL CONNECTIONS............................................................................................................................................. 7

TRANSPORTATION .................................................................................................................................................. 7

SAFETY INFORMATION ...........................................................................................................................................8

SIGNAL SYMBOL..................................................................................................................................................... 8

LABELS ON PRODUCTS ............................................................................................................................................. 8

GENERAL SAFETY CONSIDERATIONS........................................................................................................................... 9

TECHNICAL SPECIFICATIONS .................................................................................................................................10

DIMENSIONS....................................................................................................................................................... 10

CPC .............................................................................................................................................................. 10

1URM .......................................................................................................................................................... 10

CONNECTORS....................................................................................................................................................... 10

CPC .............................................................................................................................................................. 10

1URM - APSIN ............................................................................................................................................. 13

1URM – APMS / APSYN140 ........................................................................................................................ 14

CPC with Touch display............................................................................................................................... 15

Desktop....................................................................................................................................................... 17

MINIMUM DISTANCES .......................................................................................................................................... 18

ENERGIZING AND DE-ENERGIZING ........................................................................................................................... 19

PROPER OPERATION CONDITIONS ............................................................................................................................ 21

ENVIRONMENTAL INFORMATION............................................................................................................................. 21

INTRODUCTION..................................................................................................................................................... 22

INCLUDED MATERIAL ............................................................................................................................................ 22

GENERAL FEATURES AND FUNCTIONS (MODEL OVERVIEW).......................................................................................... 22

OPTIONS............................................................................................................................................................. 23

GETTING STARTED................................................................................................................................................. 24

Page 3 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

SYSTEM REQUIREMENTS........................................................................................................................................ 24

UNPACKING THE INSTRUMENT................................................................................................................................ 24

INITIAL INSPECTION............................................................................................................................................... 24

STARTING THE INSTRUMENT................................................................................................................................... 24

Applying Power .......................................................................................................................................... 24

Connecting to LAN ...................................................................................................................................... 24

Direct connectivity to host via Ethernet cable (no router) ........................................................................ 25

Connecting through USB ............................................................................................................................ 25

Connecting through GPIB ........................................................................................................................... 25

Installing the APSIN Remote Client............................................................................................................ 25

Troubleshooting the LAN Interconnection................................................................................................. 25

Shutting Down the Signal Generator......................................................................................................... 26

USING THE GRAPHICAL USER INTERFACE (GUI) ...................................................................................................27

START THE SIGNAL GENERATOR (SG) GUI................................................................................................................ 27

GENERAL LOOK .................................................................................................................................................... 27

Simultaneously controlling Multiple Signal Generators from one PC....................................................... 28

Store and Load Instrument States.............................................................................................................. 28

Setting Network Configuration.................................................................................................................. 29

Multi-Session Option .................................................................................................................................. 29

Device Port Setting ..................................................................................................................................... 29

Connecting to devices using a non-default port........................................................................................ 30

Setting the GPIB Address............................................................................................................................ 31

PERFORM FIRMWARE UPGRADE ............................................................................................................................. 31

MULTI-OUTPUT GUI CONTROL .............................................................................................................................. 31

COMBINED MODULATION...................................................................................................................................... 33

LOCAL OPERATION VIA FRONT PANEL .................................................................................................................35

DISPLAYED PARAMETER FORMATS .......................................................................................................................... 36

CW DISPLAY ....................................................................................................................................................... 36

Main Menu Display .................................................................................................................................... 37

Frequency Sweep Submenu........................................................................................................................ 37

Power Sweep Submenu.............................................................................................................................. 38

List Sweep Submenu................................................................................................................................... 38

MODULATION SUBMENU....................................................................................................................................... 39

Pulse Modulation Submenu ....................................................................................................................... 39

Amplitude Modulation Submenu............................................................................................................... 39

Frequency Modulation Submenu ............................................................................................................... 39

Page 4 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

Phase Modulation Submenu ...................................................................................................................... 39

REFERENCE SUBMENU........................................................................................................................................... 40

TRIGGER SUBMENU .............................................................................................................................................. 40

LF OUTPUT SUBMENU ........................................................................................................................................ 40

LAN CONFIGURATION SUBMENU............................................................................................................................ 41

DISPLAY SETTINGS SUBMENU ................................................................................................................................. 41

Save Settings Submenu .............................................................................................................................. 41

Load Settings Submenu .............................................................................................................................. 41

Load Defaults Submenu.............................................................................................................................. 41

HELP SUBMENU ................................................................................................................................................... 41

REMOTE PROGRAMMING THE SIGNAL GENERATOR........................................................................................... 42

BATTERY OPERATION (B3 OPTION) ...................................................................................................................... 43

EXTENDED POWER RANGE (PE3 OPTIONS) ..........................................................................................................45

MAINTENANCE AND WARRANTY INFORMATION................................................................................................46

ADJUSTMENTS AND CALIBRATION ........................................................................................................................... 46

REPAIR ............................................................................................................................................................... 46

WARRANTY INFORMATION .................................................................................................................................... 46

EQUIPMENT RETURNS ........................................................................................................................................... 46

APPENDIX A...........................................................................................................................................................47

Page 5 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

General Remarks

The devices described in this manual are signal generators that produce electromagnetic signals from 9 kHz up

to 40 GHz with a power from -90 dBm up to +25 dBm. The exact range depends on the chosen device model

and options. The devices can produce different types of modulations, such as AM, FM, PM Pulse or Chirp.

They can be used in a variety of applications such as research and development or manufacturing and testing

of electronic components.

Options, such as a 1URM Case, an intern rechargeable battery, a GPIB interface or different types of power

range extensions can be added.

Validity of this Manual

This manual is valid for the following devices and theirs extended versions:

•APSIN2010, 4010, 6010

•APSIN12G, 20G, 26G

•APULN6, 12, 20, 26, 40

•APSYN420, APSYN140

•APSYN420-2, APSYN140-X

•APMSYN, APMQS, APUASYN

•APMS06G-X, 12G-X, 20G-X, 33G-X, 40G-X

Available Casing

The devices are available in the following cases.

Compact Portable Case (CPC)

Figure 1: APSIN26G & APULN40 in a Compact Portable Case (with LCD and touch display, respectively)

1U Rackmount (1URM)

Page 6 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

Figure 2: APSIN26G in a 1URM Case

1U Case (1URM)

Figure 3: APSMXXG-4 (and APSYN140-4) in a 1URM case

Desktop Case (LH)

Figure 4: APSIN/APULN in a Desktop Case

Module

Figure 5: APMSYN as a compact module

Page 7 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

Data Connections

The devices may only be connected to a network or a computer by using a shielded LAN cable. Unless shorter

lengths are prescribed, a maximum length of 3 m must not be exceeded for the LAN and the USB connection.

Signal Connections

In general, all connections between the signal generator and another device should be made as short as

possible and must be well shielded. It is recommended to use a high-quality cable with low loss especially for

frequencies above 20 GHz.

Transportation

The devices must only be transported with the packaging supplied by the manufacturer. The device can be

lifted up or transported in any orientation.

Page 8 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

Safety Information

The following pieces of information are important to prevent personal injury, loss of life or damage to the

equipment. Please read them carefully. If the device is used in a manner not specified by this manual, the

protection provided by the device may be impaired.

Signal Symbol

In this manual, the following symbols are used to warn the reader about risks and dangers.

DANGER denotes a hazard for personal health or life.

WARNING denotes a risk or danger, that could damage the device.

Labels on Products

The following labels are on the products. Familiarize yourself with the meaning of each of the labels before

using the product.

Direct Current (DC)

Alternating Current (AC)

Earth (Ground)

EU label for separate collection of electrical and electronic waste.

Caution, general danger zone. Attend the manual and/or a notice on the device.

Page 9 – Signal Source Models – v3.04 Apr. 2023 AnaPico AG - www.anapico.com – sales@anapico.com

General Safety Considerations

FCC notice

This equipment has been tested and found to comply with the limits for a Class A device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications.

Operation of this equipment in a residential area may cause harmful interference in which case the user will be

required to correct the interference at his or her expense.

notice

The instrument meets the EMC directive and the Low Voltage Directive described in the CE declaration in

Error! Reference source not found..

If products or their components are mechanically and/or thermally

processed in a manner that goes beyond their intended use,

hazardous substances (heavy-metal dust such as nickel) may be

released. For this reason, the product may only be disassembled or

opened by specially trained personnel. Improper disassembly may

be hazardous to your health. National waste disposal regulations

must be observed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AnaPico Signalprozessor Handbücher

AnaPico

AnaPico APPH6000 Bedienungsanleitung

Beliebte Signalprozessor Handbücher anderer Marken

2Y-LINK Technology

2Y-LINK Technology CI-12-ASP-DAASS Bedienungsanleitung

Crane Song

Crane Song Falcon Bedienungsanleitung

Steg

Steg DSP 6 Bedienungsanleitung

Rocktron

Rocktron INTELLIFEX LTD Bedienungsanleitung

RF-Lambda

RF-Lambda RF1457 Bedienungsanleitung

TC Electronic

TC Electronic DB8 MKII Handbuch

Acqiris

Acqiris U5309A Bedienungsanleitung

PCI

PCI MicroTrans EQ Handbuch

Crestron

Crestron Avia DSP-1282 Bedienungsanleitung

turck

turck MS96-11EX0-R/24VDC Bedienungsanleitung

Rolls

Rolls ROTORHORN RP147 Bedienungsanleitung

ESX

ESX QUANTUM QL810SP Bedienungsanleitung

Oberheim

Oberheim GM-1000 Bedienungsanleitung

AMC

AMC DSP8X8 Bedienungsanleitung

Planet Audio

Planet Audio PC3.5B Bedienungsanleitung

Behringer

Behringer Super-X Pro CX3400 Bedienungsanleitung

Euphonix

Euphonix DF64 Digital Frame Bedienungsanleitung

Lem Elettronica

Lem Elettronica DSP30-4G Bedienungsanleitung