Anest Iwata Air Gunsa AZ3 HTE Bedienungsanleitung

INSTRUCTION MANUAL

AZ3 HTE / AZ3 HTE AV SPRAY GUN

Before commencement of work thoroughly read this

manual and its instructions, including those regarding

safety of work, and strictly observe them.

IMPORTANT

The spray gun should be operated by a trained worker. Any use and/or servicing not in compliance with this manual will

INVALIDATE THE WARRANTY. Read these instructions before using the spray gun.

SPECIFICATIONS

Max. working pressure: 6.8 bar (98 PSI) Emitted noise level (LAeqT) 7.6 dB (A) Paint tank terminal: G 1/4" F

Temperature range: 5~40 °C Air inlet terminal: G 1/4 “ M

Model Supply

type Nozzle

diameter

Ø mm

Head

symbol Lacquer

output

ml/min

Width

mm Air

consumption

l/min

Weight

with tank without tank

AZ3 HTE

AZ3 HTE AV

gravity

1.0 W2010135110 80 170

2.0

bar

200

680

540

1.3 W2010135113 150 240 200

1.5 W2010135115 190 260 200

1.8 W2010135118 260 300 205

2.0 W2010135120 265 310 205

2.5 W2010131400 424 340

3.0

bar

279

710

570

2.8 W2010133300 427 350 291

3.0 W2010131500 489 360 288

3.5 W2010131600 490 340 307

ATTENTION

Spare parts list is provided on page 3.

Manufactured by:

AIR GUNSA s.r.l. - Via degli Aceri, 1 - 21010 Cardano al Campo (VA) Italy

DISTURBANCES DURING OPERATION

Fault

Reason

Remedy

Pulsation

1. Air penetrates between the nozzle and its

tapered seat in the body.

2. Air is drawn in through head seal.

1. Unscrew the nozzle in order to clean the

seat – replace if damaged.

2. Seal the head.

Crescent

1. Lacquer residues inside the head, partially

clogged head holes. Different air pressure in

both nozzles.

1. Remove soiling from nozzles and head.

Do not use metal objects to do this.

Skew

1. Lacquer residues on nozzle hole edges,

or damaged central hole in the head.

2. Loose nozzle.

1. Remove soiling from the nozzle or replace

it if damaged.

2. Unscrew the nozzle and clean its seat.

Splitting

1. Too low lacquer viscosity.

2. Too high liquid outflow.

1. Add more lacquer in order to increase

viscosity.

2. Adjustment with jet or needle control knob.

Separate stains

1. Too low lacquer viscosity.

2. Too high liquid outflow.

1. Reduce lacquer viscosity.

2. Increase liquid outflow.

Spitting

1. Nozzle and needle are incorrectly

mounted.

2. Too short stroke of release trigger

opening air flow.

3. Lacquer residues inside the head.

1. Clean or replace nozzle and needle.

2. Replace air valve unit.

3. Clean the head.

PROBLEMS AND TROUBLESHOOTING

Problem

Location

Parts to check

Reason

Solution

Press

down

Adjust

Clean

Replace

Air leak from head

hole

Air

valve

Air valve Dirty or soiled seat X X

Air valve

seat Soiled or damaged X X

Worn out valve spring X

Valve sealing Damaged or aged X

Lacquer leaks

Spray gun nozzle

hole

Nozzle - needle unit Soiled, damaged,

seat wear X X

Loose needle knob X

Worn out needle spring X

Nozzle - body Insufficiently tightened X

Soiled or damaged seat X X

Needle seal Needle does not return to

closed position - seal too

tight

X X

Needle does not return to

closed position - lacquer

residues on the needle

X X

Needle

seal Needle seal

needle unit Wear X X

Seal Insufficient pressing down X

Lacquer does not

flow out

Nozzle hole Needle knob Insufficient opening X

Nozzle hole Clogged X

Lacquer filter Clogged X X

Sales Office : 05-083 Zaborów, Borzęcin DuŜy, Poland

ul. Warszawska 749

phone: (022) 752-06-00 fax: (022) 752-05-92

e-mail: nts@nts.com.pl www: www.nts.com.pl

Dieses Handbuch passt für folgende Modelle

Andere Anest Iwata Spritzpistole Handbücher

Anest Iwata

Anest Iwata W-71 Bedienungsanleitung

Anest Iwata

Anest Iwata WIDER1-08E2P Bedienungsanleitung

Anest Iwata

Anest Iwata RN1-H-10 Series Bedienungsanleitung

Anest Iwata

Anest Iwata KWIAMI 4 Bedienungsanleitung

Anest Iwata

Anest Iwata WA 200 Kurzanleitung

Anest Iwata

Anest Iwata MSA-200 Bedienungsanleitung

Anest Iwata

Anest Iwata LS-400 entech Bedienungsanleitung

Anest Iwata

Anest Iwata LPH-80 Bedienungsanleitung

Anest Iwata

Anest Iwata ILA Bedienungsanleitung

Anest Iwata

Anest Iwata ZP2-H15 Bedienungsanleitung

Anest Iwata

Anest Iwata LW1-10E1 Bedienungsanleitung

Anest Iwata

Anest Iwata AL-96 S5 Bedienungsanleitung

Anest Iwata

Anest Iwata High T.E.C. W400 WB Bedienungsanleitung

Anest Iwata

Anest Iwata Wider 1L Series Bedienungsanleitung

Anest Iwata

Anest Iwata TOF-50 Series Bedienungsanleitung

Anest Iwata

Anest Iwata CM-B2 Bedienungsanleitung

Anest Iwata

Anest Iwata WIDER1L-2-12J2S Bedienungsanleitung

Anest Iwata

Anest Iwata Air Gunsa GRAVITY AZ3 HTE2 Benutzerhandbuch

Anest Iwata

Anest Iwata iCon-M233N Bedienerhandbuch

Anest Iwata

Anest Iwata PC-18D Bedienungsanleitung

Anest Iwata

Anest Iwata W 200 WB Bedienungsanleitung

Anest Iwata

Anest Iwata Mazeco AMM-711 Bedienungsanleitung

Anest Iwata

Anest Iwata WIDER2L-10G2P Bedienungsanleitung

Anest Iwata

Anest Iwata WS-400 EVO Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

Graco

Graco HydroShield WMBH00 Stücklistenhandbuch

WAGNER

WAGNER W 125 Bedienungsanleitung

My Clean Buddy

My Clean Buddy PW018 Bedienungsanleitung