FILTER CLEANING AND MAINTENANCE
When a drop in performance is noted, the need for filter cleaning is the most
common reason. Cleaning intervals depend on your pond environment.
The foam filters will need replacement seasonally at minimum, and are available in
various materials. See our website for details on all replacement parts.
The biological media should not be replaced if you are keeping a balanced pond.
It will require cleaning of excess debris, but the beneficial bacteria remains.
The ceramic media will degrade over time and can be replaced. The two part
“Snap Sealed Bio-Balls” can be opened to refill the ceramic media.
We recommend Microbe-Lift brand products to “charge up” the Filters’
biological components with the beneficial bacteria necessary to convert waste
and pollutants into healthy by-products that further support a balanced pond.
If you are placing the filter in a hard to access part of the pond, we suggest
attaching a natural jute string to the unit to aid in adjustments and maintenance.
1. Rinse foam filter pads with clean water outside of pond.
2. Filter pads that are hard to clean should be replaced.
3. Clean the bio-media by rinsing with clean water outside the pond.
4. Cleaning agents or chemicals should not be used.
5. If storing the filter for winter, it should be dry and clean. Recharge the
filter with beneficial bacteria for start up in the spring.
LIMITED WARRANTY
This item is warranted to the original user against defective materials and workmanship for
a period of 12 months. Warranty does not cover replaceable filter materials such as foam
or bio media. Our limited warranty does not cover any costs associated with the installation
or removal of products subject to warranty claims or the cost of return of the item.The
warranty will commence from the date of purchase. Replacement liability is limited to any
part or parts of the unit which have failed due to defective material or workmanship. Proof of
purchase is required for all claims against the limited warranty. This warranty does not
extend to damage of the product or part resulting from accident, misuse, alteration, neglect,
abuse, improper installation or normal wear and tear to the product(s). This limited warranty
extends only to the original user of the product.
POND FILTER BOX 1500 AD46500
COMPONENTS
01. Snap-On Filter Box Cover
02. Black Coarse Foam Mechanical Filter
03. Blue Fine Foam Mechanical Filter
04. Ceramic Media inside Bio Balls
05. Two Part Snap Sealed Bio Balls (18)
06. Bagged Rock Bio Media
07. Bottom Tray
08. 1” Filter Output
09. 20” length of 1” Flexible Tubing
10. 1” Male Pump Connection
11. Female Pump Connector
12. Large Pump Connector
INTENDED USE:
This Filter Box is designed for use fully submersed at the bottom of a pond, offering
both mechanical and biological filtration.
Please be advised that ANY filtration system is intended to be a part of a balanced pond
environment, and is not intended to cure algae or other pond problems on its own.
This guide outlines the methods we recommend when using the Filter Box with our
Pro-Grade Pond Building Series™ Pumps (sold separately), however this item can be
used with virtually any pump with a flow rate from 500gph up to 1500 gallons per hour.
Diagram #1 above will assist in ordering replacement filter parts, as well as help you
identify the components required to achieve the filtration applications described below.
QUESTIONS? REPLACEMENT PARTS?
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Visit our website (www.angelodecor.com)for more information and
videos on how to assemble and properly use your product.
For more information on this and other products, please visit our web site:
www.angelodecor.com
To contact us regarding this unit, your options include:
Email:customersupport@angelodecor.com | Phone: (780) 453 - 6646 | Fax: (780) 453- 6620
Angelo Décor International Inc. | 15840 – 118th Avenue | Edmonton, AB |T5V 1C4
Diagram #1
1
2
3
4
5
6
7
10 8
9
11
12
