Use
1. Mount the tripod stand on the Ergonomic square holder with the 1/4 inch mounting screw.
3. Mount the phone clip on the middle of Ergonomic square holder, then adjust the width/length to place your smart phone.
4. Attach the LED light to the Ergonomic square holder then tighten the cold shoe mounts.
4. Attach the microphone to the Ergonomic square holder then tighten the cold shoe mounts.
5. Unfold the tripod legs and place it on a flat surface, both press the angle adjust button to select desired angel.
6. Put in 2 x AA batteries (not included) into each LED light back side. Long press the power button to turn on /off the light.
Short press the brightness button to adjust the brightness.
7. Plug one side of 3.5mm AUX cable into the microphone, then plug another side into your phone.
Note: Smartphones without a 3.5mm jack will require an adapter such as Lightning to 3.5mm for iPhones or
USB-C to 3.5mm for certain Android devices. (Adapters not included)
Specification
1. LED Light: Power:5 W;
2. LED Light working voltage: DC 3V
3. LED Light Battery:4 X AA batteries for 2 LED lights (Not included)
Safety Instruction:
1. Keep the instruction manual for future reference. Should this device be given to a third party, then this
instruction manual must also be handed over.
2. Keep the device away from all hot surfaces and naked flames.
3. Do not immerse the device in water or in other liquids.
4. Do not use the device in wet conditions.
5. Do not use the tripod in windy conditions or on an uneven surface.
6. Do not use the device if it is damaged.
7. This device is not a toy. Children should be supervised to ensure they do not play with the device.
