Anova MC509 Bedienungsanleitung

Instructions / User Manual

MC509

Millasur, SL.

Rúa Eduardo Pondal, nº 23 - Pol. Ind. Sigüeiro

15688 - Oroso - A Coruña 981 696465 www.millasur.com

ANOVA would like to congratulate you for having chosen one of

our products and guarantees the assistance and cooperation that has

always distinguished our brand over time.

This machine is designed to last many years and to be of great use if

used in accordance with the instructions contained in the user manual.

We therefore recommend that you read this instruction manual carefully

and follow all our recommendations.

For more information or questions, you can contact us through our web

supports such as www.anovamaquinaria. Com

INFORMATION ABOUT THIS MANUAL

Please pay attention to the information provided in this manual and on

the appliance for your safety and the safety of others.

•This manual contains instructions for use and maintenance.

•Take this manual with you when you go to work on the machine.

•The contents are correct at the time of printing.

•They reserve the rights to make alterations at any time without

affecting our legal responsibilities.

•This manual is considered an integral part of the product and must

remain with it in case of loan or resale.

•Ask your dealer for a new manual in case of loss or damage.

READ THIS MANUAL CAREFULLY BEFORE USING THE MACHINE

To ensure that your machine provides the best results, please read the

usage and safety regulations carefully before using it.

OTHER WARNINGS:

Incorrect use could cause damage to the machine or other objects.

Adaptation of the machine to new technical requirements could cause

differences between the content of this manual and the product

purchased.

Read and follow all instructions in this manual. Failure to follow these

instructions could result in serious personal injury.

General safety instructions

To safeguard the safety of the user and others, please pay attention to the

information displayed in this manual and on the machine itself.

Pay special attention to instructions with the following markings:

DANGER: Indicates the possibility of serious personal injury or death if

instructions are not followed.

WARNING: Indicates the possibility of equipment damage or serious personal

injury if instructions are not followed.

ATTENTION: Indicates the possibility of equipment damage or personal

injury if instructions are not followed.

Damage prevention

You can see other important information marked ATTENTION. This means that

failure to follow the instructions may cause irreparable damage to the machine.

ATTENTION:

•Use the machine with all its parts assembled, for example, fenders.

•Fuel is easily flammable and can quickly cause fires, take special care.

•The fuel and oil must be in good condition and clean.

•When you are going to start the machine, the gear must be in the neutral "N"

position.

•Be careful with the blades. When working with the machine, never touch the

moving blades with your hands or feet.

•Squeeze the clutch before engaging a new gear and release it slowly again.

•Take special care when operating the machine in reverse, especially on

slopes.

•After purchasing the machine, install the wheels according to the dealer's

instructions. After familiarizing yourself with the machine, assemble the

blades. Get used to using reverse gear before directly operating the

machine.

Due to continuous improvement in our models, some photos may vary slightly

from the actual items.

CONTENT

1. Safety information and warnings

2. Machine data

3. Installation and use

4. Start-up

5. Engine maintenance

6. Maintenance of the tiller

7. Troubleshooting

8. Exploded view

9. Declaration of conformity (CE)

1. Safety information and warnings

1.1. Trial period

•Read the manual carefully and understand the different situations that may

arise. Become familiar with the controls for proper work and learn how to

quickly stop the machine in an emergency.

•Minors are not allowed to use the machine. Nor is anyone allowed to use

the machine if they have not read the manual.

•Keep the work area clear and free of people who could be harmed by the

machine.

1.2. Preparation

•Check the work area and remove any obstacles.

•Disconnect the blade drive and shift the machine into “N” gear before turning

it on.

•Do not use the machine if you do not have appropriate work clothing and

safety shoes.

•Be especially careful when handling fuel as it is very flammable:

oUse approved tanks for storage.

oDo not refuel the machine while it is running or when the engine is hot.

oRefuel in ventilated areas. Do not do this in closed areas due to the

toxic gases that may be released.

oTighten the fuel tank cap securely and wipe away any debris before

turning the machine back on.

•When the engine is running do not make any adjustments or changes to the

machine.

•Wear eye protection while driving or using the machine.

1.3. Operational

•Do not handle the blades with your feet or hands while the machine is on or

operating.

•Do not allow other people to be near the machine while you are working,

they may be injured. Pay special attention when working in any crowded

area.

•If the machine bounces while working, stop and check for damage before

continuing to work.

•Take care of your personal safety, avoid falls or slipping.

•If the machine makes a lot of noise, stop immediately and check the reason,

there may be serious damage.

•When not working with the machine, put the gear in neutral "N" and

ALWAYS turn off the engine.

•Before making any adjustment, cleaning, checking or repair on the machine,

the engine must be turned off and all working elements must be completely

stopped.

•Do not turn on the machine in closed places as the exhaust gases can

poison you.

•Do not work if you do not have appropriate personal protective equipment.

•Keep the machine away from people and pets while working.

•Do not overload the machine by working deeper than recommended or at

higher speed than appropriate, as this may cause damage to the machine.

•Do not work on steep slopes where the machine could escape your control.

Be especially careful when driving in reverse gear.

•Do not allow observers near the machine while it is working.

•Only use accessories recommended and indicated by the

manufacturer/distributor.

•Do not use the machine when it is night or when visibility is poor.

•When working on very hard ground, the blades may cause the machine to

suddenly move forward when not entering the ground. In these cases,

release the machine and let it move forward until it stops, do not try to

control it as it may cause serious injuries.

•Do not work on the edges of cliffs or heights.

•When working on slopes, be especially careful not to let the machine fall.

1.4. Service and storage

•Keep the machine and its work accessories in good condition.

•Check the screws and other parts of the machine regularly for any looseness

or loose parts. Tighten any that are loose and replace any other missing

parts.

•The machine must be stored indoors and protected from the outside, away

from fire. Turn off and let the engine cool before storing the machine.

•If the machine is to be stored for a long period, keep this manual with the

machine as well.

•Never attempt to repair the machine without the proper tools and knowledge.

•Always save the manual for future reference.

2. Machine data

2.1. Technical specifications

MODEL MC509

ENGINE

POWER (kW) 4.2

REVOLUTIONS (r/min) 3600

MOTOR

TILL

MEASUREMENTS (LxWxH) (mm)

1550x800x910

WEIGHT (KG)

WORKING WIDTH (cm)

DEPTH (cm)

≥10

WORKING SPEED (m/s) 0.14

PRODUCTIVITY (m2ih)

≥400

FUEL CONSUMPTION (kg/h)

≤1.87

TRANSMISSION

V type belt

CONNECTION V-type belt with motor pulley

GEARS

High speed (r/min)

116

Average speed (r/min)

Slow speed (r/min)

Reverse gear (r/min)

NUMBER OF BLADES

Note: Technical data may be modified according to improvements in the machine.

2.2. Identification of the parts

1. Engine support

2. Wheels

3. Strap protection

4. Mudguard

5. Resistance rod

6. Shift rod

7. Ignition switch

8. Clutch

9. Engine

10. Throttle switch

11. Handlebar bar

12. Adjustment handle

13. Handlebar attachment

14. Chain box

15. Gearbox

3. Installation and use

3.1. Facility

All tillers have been tested repeatedly before leaving the factory. But customer

should check and adjust all parts before using for better performance. Installation

as follows:

1. Mount the travel wheels on the hexagonal drive shaft, fix them with a Φ 8

pin.

2. Assemble the router assembly and depth rod.

3. Mount the handrail frame to the handrail, fix it with the locking handle and

bolt.

4. Connect the shift rod with the axle fork.

5. Mount the duct guard frame to the motor mount and drag assembly, fix the

dust shields.

3.2. Routine checks

1. Check engine oil.

Warning

The oil capacity is 0.6L when the oil level is in normal condition, use will seriously

damage it.

Warning

Use clean, good quality oil suitable for 4-stroke engines. Dirty oil or other oil will

shorten engine life.

•Put the engine in a horizontal position.

•Unscrew the oil level indicator and clean it (see image 3)

•Place the oil dipstick into the oil filler hole (do not screw it in)

•Take out the oil bar, it is normal condition if the oil is in the bar range.

•SAE15W40 or SAE30 oil type is recommended, it is suitable for common

temperatures.

2. Check the transmission case oil.

•Place the cultivator horizontally, unscrew the oil dipstick (see image 4).

•The normal oil filling capacity is 1.6L and the level is below the lip of the oil

filler hole. If the oil level is too low, fill oil to the normal line.

3. Check the air filter

Warning

It is prohibited to start the engine without an air filter, it will accelerate the abrasion

of the engine.

4. Rudder adjustment

I. Handrail height adjustment

Attention

In case the cultivator falls, place the cultivator in

position horizontal.

Loosen the adjustment handle, choose the

appropriate opening, adjust the handle frame to a

comfortable height, and then fix it firmly (see picture

5).

II. Adjust the height of the strong rod to control

the tilling depth (figure 6).

III. Clutch adjustment and operation.

Attention

Reduce engine speed before using the clutch.

•With "Separation" and "Combination" of the clutch, you can control the

power output.

•When you grab the clutch handle, the clutch is combined, then the tiller can

move (see picture 7)

•When you release the clutch handle, the clutch separates, engine power is

cut to the tiller, and then the tiller stops (see image 8).

Attention

If the clutch cable is not properly adjusted, it may affect

the regular service of the cultivator.

•Make sure the clutch cable tension, if not in the range (see image 9), adjust

the bolt to the correct position.

•Start the engine to check clutch separation and combination if necessary.

IV. Belt tension adjustment.

•Grab the clutch handle, the tensioner pulley moves up to tension the belt,

the normal range is 60-65mm (picture 10)

•If it is outside this range, please adjust as follows: First, loosen the 4 fixed

bolts, move the motor forward if the belt is too loose, move it backward

when it is too tight. Make sure the tension is in the normal range and then fix

the bolts (picture 11).

•Loosen the bolts of the belt protection frame, grab the clutch handle, adjust

the gap between the frame and the belt.

V. Oil throttle cable adjustment

•Normal idle speed range: 1500±150r/min, high speed: 3800±50r/min, can be

adjusted according to the speed indicator.

•Confirmation method and speed adjustment.

a) Without load, turn the switch on the hand frame to the largest position, see if

the revolution meter shows 3800 ± 50, turn the switch to the smallest

position, see if it shows 1600 ± 150.

b) If the revolution meter indicators are not between the above numbers, you

need to make some adjustment to the gasoline engine. The following are

specific facts:

oWatch for falls at each connection, fix it to normal position if it falls or

comes loose.

Little

Big

throttle switch

Inhaltsverzeichnis

Andere Anova Pinne Handbücher

Anova

Anova MC52 Bedienungsanleitung

Beliebte Pinne Handbücher anderer Marken

MTD

MTD 410R Bedienungsanleitung

Craftsman

Craftsman 247.29931 Bedienungsanleitung

MTD

MTD FRT Series Bedienungsanleitung

Craftsman

Craftsman 917.298353 Bedienungsanleitung

Troy-Bilt

Troy-Bilt Colt FT Bedienungsanleitung

Ryobi

Ryobi 510r Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

YAT

YAT YT5601-01 Wartungshandbuch

Craftsman

Craftsman 917.296010 Bedienungsanleitung

Troy-Bilt

Troy-Bilt OEM-290-260 Bedienungsanleitung

Scheppach

Scheppach MTP560 Montageanleitung

GARDEN WAY

GARDEN WAY 12194 Bedienungsanleitung

Classen

Classen STAND-AER SA-25 Montage- und Wartungsanleitung

Craftsman

Craftsman 850 Series Bedienungsanleitung

DR PILOT 2 Kurzanleitung

Altrad

Altrad ATIKA BH 1400 N Leitfaden

WIL-RICH

WIL-RICH 2500 Bedienungsanleitung

Viking

Viking HB 685 Bedienungsanleitung