Anritsu MU120119A Bedienungsanleitung

Document No.: M-W2121AE-12.0

ANRITSU CORPORATION

MU120119A

OC-3/12 STM-1/4 (1310 nm) Module

MU120120A

OC-3 STM-1 (1310 nm) Module

Operation Manual

12th Edition

•

For safety and warning information, please read this

manual before attempting to use the equipment.

•Additional safety and warning information is

provided within the MD1230B Data Quality Analyze

Operation Manual or MP1591A Network Performanc

Tester Operation Manual. Please also refer to this

document before using the equipment.

•Keep this manual with the equipment.

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the

following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings

of the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu

equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols

and take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MU120119A OC-3/12 STM-1/4 (1310 nm) Module

MU120120A OC-3 STM-1 (1310 nm) Module

Operation Manual

1 April 2003 (First Edition)

1 August 2008 (12th Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Equipment Certificate

Anritsu Corporation certifies that this equipment was tested before

shipment using calibrated measuring instruments with direct

traceability to public testing organizations recognized by national

research laboratories, including the National Institute of Advanced

Industrial Science and Technology, and the National Institute of

Information and Communications Technology, and was found to meet the

published specifications.

Anritsu Warranty

Anritsu Corporation will repair this equipment free-of-charge if a

malfunction occurs within one year after shipment due to a manufacturing

fault, under the condition that this warranty is void when:

•The fault is outside the scope of the warranty conditions described in

the operation manual.

•The fault is due to mishandling, misuse, or unauthorized modification

or repair of the equipment by the customer.

•The fault is due to severe usage clearly exceeding normal usage.

•The fault is due to improper or insufficient maintenance by the

customer.

•The fault is due to natural disaster including fire, flooding,

earthquake, etc.

•The fault is due to use of non-specified peripheral equipment,

peripheral parts, consumables, etc.

•The fault is due to use of a non-specified power supply or in a

non-specified installation location.

In addition, this warranty is valid only for the original equipment

purchaser. It is not transferable if the equipment is resold.

Anritsu Corporation shall assume no liability for injury or financial loss of

the customer due to the use of or a failure to be able to use this equipment.

Anritsu Corporation Contact

In the event that this equipment malfunctions, contact an Anritsu

Service and Sales office. Contact information can be found on the last

page of the printed version of this manual, and is available in a separate

file on the CD version.

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re-export from you

country.

Before re-exporting the product or manuals, please contact us to confirm

whether they are export-controlled items or not.

When you dispose of export-controlled items, the products/manuals need

to be broken/shredded so as not to be unlawfully used for military purpose.

Notice

The following actions are strictly prohibited for all of the software

installed in this product or otherwise provided by Anritsu:

1. Copying, except for archival purposes,

2. Transferring to a third party apart from this product,

nalyzing the incorporated software including but not limited to

modifying, decompiling, disassembling, and reverse engineering.

CE Conformity Marking

Anritsu affixes the CE Conformity marking on the following product(s) in

accordance with the Council Directive 93/68/EEC to indicate that they

conform to the EMC and LVD directive of the European Union (EU).

CE marking

1. Product Model

Plug-in Modules: MU120119A OC-3/12 STM-1/4 Module (1310 nm),

MU120120A OC-3 STM-1 Module (1310 nm)

2. Applied Directive and Standards

When the above modules are installed in the main frame shown below,

the applied directive and standards of these modules conform to those

of the main frame.

Main frame: MD1230A/B Data Quality Analyzer,

MD1231A/A1 IP Network Analyzer,

MT7407A Multislot Chassis

MP1591A Network Performance Tester

PS: About main frame

Please contact Anritsu for the latest information on the main frame

types that the above modules can be used with.

C-tick Conformity Marking

Anritsu affixes the C-tick marking on the following product(s) in

accordance with the regulation to indicate that they conform to the EMC

framework of Australia/New Zealand.

C-tick marking

1. Product Model

Plug-in Modules: MU120119A OC-3/12 STM-1/4 Module (1310 nm),

MU120120A OC-3 STM-1 Module (1310 nm)

2. Applied Directive and Standards

When the above modules are installed in the main frame shown below,

the applied directive and standards of these modules conform to those

of the main frame.

Main frame: MD1230A/B Data Quality Analyzer,

MD1231A/A1 IP Network Analyzer,

MT7407A Multislot Chassis

MP1591A Network Performance Tester

PS: About main frame

Please contact Anritsu for the latest information on the main frame

types that the above modules can be used with.

About This Manual

This operation manual is for MD1230 and MP1590 families.

Note:

MD1230 family is a general name for the MD1230A/B Data Quality

Analyzer, the MD1231A/A1 IP Network Analyzer, and the MT7407A

Multislot Chassis.

The MP1590 family is a general name for the MP1590B Network

Performance Tester and the MP1591A Network Performance

Tester.

Note that the MD1230A, MD1231A/A1, and MT7407A are not

supported in Ver. 7.0 and above.

The MD1230 family operation manuals consist of separate documents for

the main unit, control software, module(s), remote control operation, and

options, as shown below.

Configuration of MD1230

Family Operation Manual

indicates this document.

Describes basic operations of the MD1230B.

MD1230B Data Quality Analyzer

Operation Manual

Describes how to use the software that controls the

mainframe of the MD1230 family.

MX123001A Data Quality Analyzer Control Software

Operation Manual

Describes basic operations of Ethernet modules.

Ethernet Module

Operation Manual

Describes basic operations of SDH/SONET modules.

MU120103A/B 2.5G (1.31) Module

MU120104A/B 2.5G (1.55) Module

MU120105A 10G (1.31) Module

MU120106A 10G (1.55) Module

Operation Manual

MU120119A OC-3/12 STM-1/4 Module (1310 nm)

MU120120A OC-3 STM-1 Module (1310 nm)

Operation Manual

Describes remote control via RS-232C, GPIB, and

Ethernet interfaces.

MD1230B Remote Control

Operation Manual

Describes basic operations of SDH/SONET modules.

Describes how to operate the software for monitoring

Ethernet traffic.

pplication Traffic Monitor

Operation Manual

Describes basic operations of Decode modules.

Decode Module

Operation Manual

Describes basic operations of Tcl Interface.

Tcl Interface

Operation Manual

Describes basic operations of Expert Analysis modules.

Expert Analysis Module

Operation Manual

III

The MP1590 family operation manuals consist of separate documents for

the mainframe, module(s), control software, remote control operation, and

options, as shown below.

Configuration of MP1590

Family Operation Manual

MX159001B Network Performance Tester

Control Software Operation Manual SDH Edition

Describes how to operate the MP1590B control

software (SDH Edition).

Describes specifications for the EoS module.

Describes basic operations of the MP1591A.

Describes specifications for the SDH/SONET module.

MU150121A 10/10.7G Optical Unit (Tx)

MU150122A 10/10.7G Optical Unit (Rx Narrow)

MU150123A 10/10.7G Optical Unit (Rx Wide)

MU150134A 10/10.7G Optical Unit (Tx Ex. Mod)

Operation Manual

Describes specifications for the EO/OE modules.

indicates this document.

Describes specifications for the Jitter module.

MU150100A 10/10.7G Unit Operation Manual

MU150125A 10/10.7G Jitter Unit Operation Manual

MU150101A 2.5/2.6G EoS Unit Operation Manual

MP1591A Network Performance Tester

Operation Manual

MX159001B Network Performance Tester

Control Software Operation Manual SONET Edition

Describes how to operate the MP1590B control

software (SONET Edition).

MP1590B Network Performance Tester

Operation Manual

Describes basic operations of the MP1590B.

Describes remote control via RS-232C, GPIB, and

Ethernet Interfaces.

MP1590B/MP1591A Network Performance Tester

Remote Control Operation Manual

Describes specifications for the MP1590A/B-30.

MP1590A/B-30 High Precision Jitter Analysis

Operation Manual

Describes how to operate the software for monitoring

Ethernet traffic.

pplication Traffic Monitor

Operation Manual

Ethernet Module

Operation Manual

Describes basic operations of Ethernet modules.

Describes basic operations of SDH/SONET modules.

MU120119A OC-3/12 STM-1/4 Module (1310 nm)

MU120120A OC-3 STM-1 Module (1310 nm)

Operation Manual

MU120103A/B 2.5G (1.31) Module

MU120104A/B 2.5G (1.55) Module

MU120105A 10G (1.31) Module

MU120106A 10G (1.55) Module

Operation Manual

Describes specifications for the MU150121B/23B.

MU150121B 10/10.7G Optical/Electrical Unit (Tx )

MU150123B 10/10.7G Optical/Electrical Unit (Rx Wide)

Operation Manual

Describes specifications for the MU150124B.

MU150124B 10.3G Optical/Electrical Unit (Rx Wide)

Operation Manual

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Anritsu Steuereinheit Handbücher

Anritsu

Anritsu Network Master Pro MT1040A Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu Network Master Pro MT1040A Bedienungsanleitung

Anritsu

Anritsu MU181040A Bedienungsanleitung

Anritsu

Anritsu MA25400A Bedienungsanleitung

Anritsu

Anritsu MN4765B Bedienungsanleitung

Anritsu

Anritsu MW9077A Bedienungsanleitung

Anritsu

Anritsu VectorStar 3743A/AX Bedienungsanleitung

Anritsu

Anritsu MT1000A Network Master Pro Bedienungsanleitung

Anritsu

Anritsu Network Master MT9090A Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung