Multiport RS232 Serial PCMCIA/CardBus PC Card
3
3. The “Add New Hardware Wizard” in the Operating Systems will be
invoked, and will guide you to complete the whole driver
installations.
4. Installing 9-pin Serial cables
Connect 9-pin serial cables to each serial device from the PC
card DB9 connector. Please note that each port number was
designated on the top side of the connectors. Since the serial
port is not plug and play, you may need to re-scan the hardware
by the Windows’ Device Manager.
Note:
PLEASE DO NOT LET WINDOWS AUTO SEARCH THE DRIVERS ON THE CD, it
will cause problems because the INF files will be conflict in this case.
Instead, please browse to the correct location (folder) manually to
make sure the correct drivers are chosen and installed correctly.
Note for Windows 2000:Please Update your Windows 2000
with the SP4 (service pack 4) or above before installing the following drivers.
Or you will NOT able to make the PCMCIA to RS-232C PC card work
properly.
