ANTAIRA LNP-0500G-24 Series Bedienungsanleitung

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G Series User Manual V1.0

LNP-0500G-24 Series

5-Port Industrial Gigabit PoE+ Unmanaged Ethernet Switches with

4*10/100/1000Tx (30W/Port) + 1*10/100/1000Tx,

12~36VDC (Built-in Voltage Booster)

Version

1.0

User Manual

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC. Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC. is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC. provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC. may make improvements and/or changes to the product and/or specifications of the product described in

this manual, without prior notice. Antaira Technologies, LLC. will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

FCC Notice

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Unmanaged Ethernet Switches

User Manual

Version 1.0 (October 2015)

This manual supports the following models:

LNP-0500G-24

LNP-0500G-24-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail (support@antaira.com).

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

Table of Contents

1.Overview.......................................................................

1.1

Key

Features ......................................................

1.2

Package

Contents..............................................

1.3 Safety

Precaution...............................................

Hardware Description

.................................................

2.1 Physical

Dimensions

..........................................

2.2 Front Panel

........................................................

2.3 Top

View............................................................

2.4

LED

Indicators

....................................................

2.5

Ethernet

Ports.....................................................

2.6

Cabling

...............................................................

2.7 Wiring the Power

Inputs

.....................................

2.8

Wiring the Fault Alarm Contact ..........................8

Mounting Installation

..................................................

3.1

DIN-Rail

Mounting..............................................

3.2

Wall

Mounting...................................................

Hardware

Installation................................................

4.1

Installation

Steps..............................................

5. Network Application

.................................................

Trouble

Shooting

.......................................................

7. Technical

Specifications

..........................................

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G Series User Manual V1.0

1. Overview

Antaira Technologies’LNP-0500G-24 series is an industrial Gigabit PoE+ unmanaged

Ethernet switch featuring 4*10/100/1000Tx PoE RJ45 ports and 1*10/100/1000TxRJ45 port.

Each PoE Ethernet port supports an IEEE 802.3at/af with a high power PoE+ output up to 30W

per port, making it ideal for applications that demand a high power PoE power source within any

harsh or outdoor environment.

The LNP-0500G-24series is IP30 rated and DIN-rail mountable with two wide operating

temperature models that support either a standard temperature range (STD: -10°C to 70°C) or

an extended temperature range (EOT: -40°C to 75°C). It also has a high EFT and ESD

protection to prevent against any unregulated voltage.

This product series provides a reliable hardened Ethernet connection with PoE functions for any

outdoor or harsh industrial application environment, such as, security surveillance, ITS-traffic

monitoring systems, oil/gas and mining, facility management for power/utility, water wastewater

treatment plants, and lastly, automated production lines in factory automation.

1.1 Key Features

System Interface/Performance

All RJ-45 ports support the auto MDI function

Embedded 4*10/100/1000Tx (PSE 30W/Port), and 1*10/100/1000Tx

Store-and-forwardswitching architecture

8K MAC address table

Jumbo Frame Support up to 10.0K

Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

Power Input

DC 12~36V redundant power, with a 6-pin removal terminal block

Operating Temperature

Standard operating temperature model: -10°C ~ 70°C

Extended operating temperature model (–T): -40°C ~ 75°C

Case/Installation

IP-30 protection

DIN-Rail and wall mount design

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

1.2 Package

Contents

1 - LNP-0500G-24(-T): 5-port industrial Gigabit PoE+ unmanaged Ethernet switch

with 4*10/100/1000Tx (30W/port) and 1*10/100/1000Tx

1 - Product CD

2 -

all mounting brackets and screws

1 - DC cable –18 AWG & DC jack 5.5x2.1mm

1.3 SafetyPrecaution

Attention: If the DC voltage is supplied by an external circuit, please use a protection

device on the power supply input. The industrial Ethernet

switch’s

hardware specs, ports, cabling information, and wiring installation will be

described within this user manual.

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

2. Hardware Description

2.1 Physical Dimensions

Figure 2.1, below, shows the physical dimensions of Antaira Technologies’LNP-0500G-24 series:

5-port industrial Gigabit PoE+ unmanaged Ethernet switch with 4*10/100/1000Tx (30W/port)

and

1*10/100/1000Tx.

(W x D x H) is 46mm x 99mm x

142mm

Figure

2.1

LNP-0500G-24 Series Physical

Dimensions

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

2.2 Front Panel

The front panel of the LNP-0500G-24 series: 5-port Gigabit industrial PoE+ unmanaged Ethernet

switch with 4*10/100/1000Tx (30W/port) and 1*10/100/1000Tx.See Figure 2.2.

6-Pin Removal Terminal Block (Power Input)

Grounding Screw

LED for PWR1, PWR2, and Fault

LAN Port #5 –10/100/1000Tx

LED for 1000Tx network speed

status

LAN Port (1~4) 10/100Tx

LED for 10/100Tx network speed

Status

LED for PoE Status

Figure

2.2

Front Panel of the

LNP-0500G-24 Series

2.3 Top View

Figure 2.3, below, shows the top panel of the LNP-0500G series switch that is equipped with

one 6-pin removal terminal block connector for dual DC power inputs (12-36 VDC).

Figure

2.3

Top Panel View of LNP-0500G-24

Series

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

2.4 LED Indicators

There are LED light indicators located on the front panel of the industrial Ethernet switch that

display the power status and network status. Each LED indicator has a different color and has

its own specific meaning, see below in Table 2.1.

LED

Color

Description

Green

Power input 1 is active

Off

Power input 1 is inactive

Green

Power input 2 is active

Off

Power input 2 is inactive

Fault

Red

Power input 1 or 2 is inactive

Off

Power input 1 and 2 are both functional,or no power

inputs

PoE

Indicators

(Port

1~4)

Green

The port is supplying power to the powered device

Off

No powered-device attached or power supplying fails

LNK/ACT

(SFP Port)

Green

Connectedto network

Flashing

Networkingis active

Off

Not connectedto network

LAN Port 1 ~ 5

(Left LED)

Green

Connected to network, 1000Mbps

Flashing

Networking is active

Off

Not connectedto network

LAN Port 1 ~ 5

(Right LED)

Green

Connected to network, 100Mbps/10Mbps

Flashing

Networkingis active

Off

Not connectedto network

Table

2.1

LED Indicators for LNP-0500G-24

Series

2.5 Ethernet Ports

RJ-45 Ports

RJ-45 Ports (Auto MDI/MDIX): The RJ-45 ports (LAN 1~5) are auto-sensing for

10/100/1000Base-T, or 100Base-Tx devices connections. Auto MDI/MDIX means that the switch

can connect to another switch or workstation without changing the straight-through or crossover

cabling. See the figures shown below for straight-through and crossover cabling schematics.

Antaira Technologies - Industrial Ethernet Switches

LNP-0500G-24 Series User Manual V1.0

RJ-45 Pin Assignments (Table 2.2)

Pin Number

Assignment

Rx+

Rx-

Tx+

Tx-

Table

2.2

RJ45 Pin

Assignments

Note: The “+”and “-”signs represent the polarity of the wires that make up each wire pair.

All ports on this industrial Ethernet switch support automatic MDI operations. Users can use

straight-through cables (see figure below) for all network connections to PCs, servers, and other

switches or hubs. With straight-through cable, pins 1, 2, 3, and 6, at one end of the cable, are

connected straight through to pins 1, 2, 3 and 6 at the other end of the cable. The table below

(Table 2.3) shows the

10BASE-T/100BASE-TX/1000BASE-T

MDI port pin outs.

Pin MDI-X

Signal Name

MDI Signal Name

Receive Data plus (RD+)

Transmit Data plus (TD+)

Receive Data minus (RD-)

Transmit Data minus (TD-)

Transmit Data plus (TD+)

Receive Data plus (RD+)

Transmit Data minus (TD-)

Receive Data minus (RD-)

Table

2.3

Ethernet Signal Pin

Outs

The following figures show the cabling schematics for straight-through and crossover cables.

Figure 2.4 Figure

2.5

Straight-ThroughCables Schematic Crossover Cables

Schematic

Andere Handbücher für LNP-0500G-24 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ANTAIRA Schalten Handbücher

ANTAIRA

ANTAIRA LNP-0800-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-1202M-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-C500 Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1002G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA USB-HUB4K3 Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-1802G-M12-10G-SFP-67 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-1802G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0802C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1600-E Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0501-M-V2 Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-2828G-10G-SFP Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-C501G-SFP-bt Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0702C-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-0501 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0501 V2 Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-1600G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602 24-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-C602G-SFP-bt-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-C500G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-C602G-SFP-T-V2 Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0800G-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1600G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0600-24 Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0702G-SFP-bt-V2 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch