ANTAIRA USB-HUB4K Bedienungsanleitung

Thank you for purchasing this high-speed 4-port USB2.0 hub. It provides

an ideal solution to expand 4 USB2.0 ports from one single USB2.0 host

port. It provides metal case with Screw Lock feature for upstream and

downstream USB ports. It provides excellent reliability and

performance for most of the applications.

Features:

Compliant with USB Specification Revision 2.0

Rigid and Wall-mountable Metal Case

Supports Screw Lock Mechanism for Upstream and Downstream

Connectors to Enhance Reliability

Supports High-speed and or Full-speed Packet

Protocol Sequencer for Endpoint 0/1

Provides 7 Downstream Facing Ports

Supports 480Mbps, 12Mbps and 1.5Mbps Speed

Supports Self-powered and Bus-powered Mode

Port #1

Port#4

4-Port USB2.0 Metal Hub with Screw Lock

Mechanism

Installation Guide

1. Introduction

2. Connector Layout

Downstream USB2.0 Ports

Power LED

+5V DC Jack, w/ Screw Lock

USB2.0 Connector (upstream

port, w/ Screw Lock)

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

Back side Connection:

Front Side Connection:

+5V DC Jack Power Connector (w/ Screw Lock): A DC5V AC

adapter (with optional Screw Lock Connector) is supplied

with this product. The AC adapter’s output has to be

connected to here.

+5V DC Jack

(AC Adapter w/ Screw Lock)

Type-B USB2.0

Upstream Cable

(w/ Screw Lock)

Downstream USB2.0 Port w/

Screw Lock Cable

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

USB2.0 Upstream Connector (w/ Screw Lock): Type-B

connector from upstream USB2.0 port. It is connected from

host or another USB2.0 hub. The connector is compatible

with either non-Screw-Lock or Screw-Lock type cables.

USB2.0 Downstream Connectors (w/ Screw Lock): There are

4 Type-A downstream USB2.0 connectors. They should be

connected to the USB devices with non-Screw-Lock or

Screw-Lock (optional) cables.

1. Use static electricity discharge precautions.

Remove possible static discharge potential from any

objects that the hub may come in contact with before

installation. This can be accomplished by touching a bare

metal chassis rail after you have turned off the power.

2. Attached the AC power adapter.

3. Connecting USB Host cable: The host cable is a standard

A-to-B USB2.0 cable (or optional Screw-Lock type cables).

Please connect the type-A end connector of the cable to

your upstream USB port, then connect the type-B end

connector to this hub. Since the USB hub is plug-and-play,

you don’t have to turn off your host computer when

installing the hub.

Note: In some cases, you will see an error message said

that the USB Hub caused the USB bus power over the current limit,

please ignore this message since the hub is hot plug and its power

capacitor will cause a very short period of current. It will NOT affect

your USB function.

4. Connect the USB devices to the downstream ports of this

hub. You can use either non-Screw-Lock or Screw-Lock

type (optional) cables.

5. Mount your hub on the wall if required.

3. Hardware Installation

4S/8S RS232 to USB Multi Serial Adapter w/ Metal Case

To check the USB hub installation in Windows device manager, please

follow the following steps:

1. Click Start

2. Click Control Panel

3. Click System

4. Click Device Manager button

5. Double click Universal Serial Bus Controller

6. Double click Generic USB Hub, the message will show that this

device is working properly.

Operating temp.: 0 to 558C (32 to 1318F)

Operating humidity: 5 to 95% RH

Dimensions (LxWxH): 7.03”(L)x2.43”(W)x0.92”(H)

(17.85 x 6.16 x 2.34 cm)

5. Environmental Specifications

4. Checking the Hub Installation

Here is your USB2.0 Hub

Andere Handbücher für USB-HUB4K

Inhaltsverzeichnis

Andere ANTAIRA Schalten Handbücher

ANTAIRA

ANTAIRA LNP-0500-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0500 series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-C602G-SFP-V2 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-0602-M-V2 Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-800-M12-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-C501G-SFP-bt Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0800 Series Bedienungsanleitung

ANTAIRA

ANTAIRA Lanolinx LNX-1002GN Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0501G-SFP-T Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-C800G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-800AGH Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1002G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-2004G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1002C-SFP-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-1600G Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-2012G-SFP Series Bedienungsanleitung

ANTAIRA

ANTAIRA LMX-0802-M Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0800-T Bedienungsanleitung

ANTAIRA

ANTAIRA LMP-1002C-SFP-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNX-1600-E Series Bedienungsanleitung

ANTAIRA

ANTAIRA LNP-0500G-24 Series Bedienungsanleitung

ANTAIRA

ANTAIRA USB-HUB4K Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung