Antec TruePower Classic TP-550C Bedienungsanleitung

Over Power Protection (OPP), Over Temparature Protection (OTP), Surge & Inrush Protection (SIP) &

No Load Operation (NLO). Sometimes the PSU will “latch” into a protected state. You will need to

power off the PSU and clear the fault before it will function again. There are no user-replaceable fuses

in your TP-550C.

80 PLUS® CERTIFICATION

80 PLUS® certification is the most widely recognized

independent standard in power supply efficiency. An 80

PLUS® certified power supply uses less energy and

generates less heat to stay cooler, run quieter and last

longer. The TP-550C has been 80 PLUS® GOLD certified to

be at least 87% efficient at a wide range of operating

loads; this will lower your operating costs and help protect

the environment.

POWER OUTPUT

To see the output capacity and regulation for each different voltage, see table 1.

TABLE 1

Output Voltage

Load Max.

Regulation

Ripple & Noise

+12V1

30A

± 5%

< 120 mV

+12V2

30A

± 5%

< 120 mV

+3.3V

20A

± 5%

< 50 mV

+5V

20A

± 5%

< 50 mV

-12V

0.3A

± 10%

< 120 mV

+5Vsb

2.5A

± 5%

< 50 mV

TABLE 2

Cable Quantity

Connectors

+12V Rail

Description

X 1

+12V1

24(20+4)-pin Motherboard

X 1

+12V1

8(4+4)-pin ATX12V/EPS12V

X 2

+12V2

8(6+2)-pin PCI-E

+12V1

Molex + FDD

X 3

X 1

X 3

+12V1

SATA + Molex

X 1

INSTALLATION

Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your

case manual if you are unsure where the power supply should be installed.

Connect the 24-pin main power connector to your motherboard.

Connect the 8-pin or 4+4-pin connector for the CPU. If your motherboard has an 8-pin socket with a

cover on some of the openings, we recommend that you remove the cover and use the 8-pin

connector.

Note: Please also refer to your motherboards manual for any special instructions.

Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied

with your PSU.

PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient,

making the hardwired connector the preferred choice. More powerful cards use multiple connectors,

including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on the PSU can be used as

either a 6- or 8-pin connector.

Hard drives, optical drives (CD/DVD/BluRay™) and other accessories will use either the older 4-pin

Molex connector or the newer 15-pin SATA connector. 4-pin Molex connectors have two black, one

yellow and one red wire. The SATA connector has an additional orange power wire.

When you have all the connections secured, turn the switch on the PSU to the “|” position.

Technical Support:

www.antec.com/support

USA & Canada

1-800-22ANTEC

[email protected]

Europe

+31-(0)10-4622060

[email protected]

Asia

+886 (0)800-060-696

[email protected]

Visit us on Facebook for contests, information & support

USA & Canada

facebook.com/AntecInc

Europe

facebook.com/AntecEurope

facebook.com/AntecUK

Australia & New Zealand

facebook.com/AntecAU

India

facebook.com/AntecIndia

Israel

facebook.com/AntecIsrael

Philippines

facebook.com/AntecPH

Antec, Inc.

47900 Fremont Blvd., Fremont, CA 94538 / USA

Tel: 510-770-1200 - Fax: 510-770-1288

www.antec.com

Specifications are subject to change without prior notice. Actual product(s) and accessories may differ from illustrations. Omissions and printing errors

excepted. Content of delivery might differ in different countries or areas. Some trademarks may be claimed as the property of others.

Reproduction in whole or in part without written permission is prohibited.

Inhaltsverzeichnis

Andere Antec Stromversorgung Handbücher

Antec

Antec TruePower Trio 430 Wat Bedienungsanleitung

Antec

Antec HCG-750 Bedienungsanleitung

Antec

Antec EA-650 Platinum Bedienungsanleitung

Antec

Antec SMARTPOWER SP-400 Bedienungsanleitung

Antec

Antec Veris Fusion 430 Bedienungsanleitung

Antec

Antec BP550 PLUS Bedienungsanleitung

Antec

Antec HCG-620 Bedienungsanleitung

Antec

Antec Paddle Switch Bedienungsanleitung

Antec

Antec HCG-400M Bedienungsanleitung

Antec

Antec HCG-520M Bedienungsanleitung

Antec

Antec NEO ECO 450C Bedienungsanleitung

Antec

Antec VP550F Bedienungsanleitung

Antec

Antec TPII-380 Bedienungsanleitung

Antec

Antec SMARTPOWER 2.0 Bedienungsanleitung

Antec

Antec HCP-750 Bedienungsanleitung

Antec

Antec NSK2400 Bedienungsanleitung

Antec

Antec HCG-620M Bedienungsanleitung

Antec

Antec TP-750 Blue Bedienungsanleitung

Antec

Antec SMARTPOWER 2.0 Bedienungsanleitung

Antec

Antec EARTHWATTS Bedienungsanleitung

Antec

Antec NeoPower 550 Bedienungsanleitung

Antec

Antec TRUEPOWER TP-650 Bedienungsanleitung

Antec

Antec Basiq BP350 Bedienungsanleitung

Antec

Antec SmartPower 4 Serial-ATA Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung