Anthem Statement D2 Bedienungsanleitung

STATEMENT D2

OPERATING MANUAL

UPDATES: www.anthemAV.com

SOFTWARE VERSION 1.3x

™

SAFETY PRECAUTIONS

READ THIS SECTION CAREFULLY BEFORE PROCEEDING!

The lightning flash with arrowpoint within an equilateral triangle

warns of the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle warns users

of the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE

AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS PRODUCT.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE THE FUSE ONLY WITH THE SAME AMPERAGE

AND VOLTAGE TYPE. REFER REPLACEMENT TO QUALIFIED SERVICE PERSONNEL.

WARNING: UNIT MAY BECOME HOT. ALWAYS PROVIDE ADEQUATE VENTILATION TO ALLOW FOR COOLING. DO NOT

PLACE NEAR A HEAT SOURCE, OR IN SPACES THAT CAN RESTRICT VENTILATION.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

1. Read Instructions – All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions – The safety and operating instructions should be retained for future reference.

3. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should be followed.

5. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp, soft cloth for cleaning.

6. Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

7. Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow

manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

8. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these openings must not be blocked or covered. The openings should

never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed

in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

9. Power Sources – This product should be operated only from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the operating instructions.

10. Grounding and Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11. Power-cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

12. Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna

or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article

810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to the proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

13. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and disconnect the antenna or cable systems. This will prevent

damage to the product due to lightning and power-line surges.

14. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

15. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in

a risk of fire or electric shock.

Antenna Lead-In Wire

Antenna-Discharge Unit 

(NEC Section 810-20)

Grounding Conductors 

(NEC Section 810-21)



Power Service Grounding

Electronic System

(NEC ART 250. Part H)

NEC-National Electrical Code

Electrical Service 

Equiptment

Ground Clamp

Ground Clamps



S2898A

Anthem, AnthemLogic, ARC, Sonic Frontiers, and Paradigm are trademarks or registered trademarks of Paradigm Electronics Inc.

part without our express written permission. We reserve the right to change specifications and/or features without notice as

design improvements are incorporated.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “Surround EX” and the

double-D symbol are trademarks of Dolby Laboratories.

“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater Systems, Inc.

Manufactured under license from THX Ltd. U.S. patent numbers 5,043,970; 5,189,703; and/or 5,222,059. European patent number

0323830. Other U.S. and foreign patents pending. Ultra2 and THX are trademarks or registered trademarks of THX Ltd. Lucasfilm is

a trademark of Lucasfilm Ltd. Surround EX is a trademark of Dolby Laboratories. Used under authorization.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited

viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

VXP, Visual Excellence Processing and the VXP logo are trademarks or registered trademarks of Gennum Corporation.

All other trademarks are the property of their respective owners.

RECYCLING AND REUSE GUIDELINES (Europe)

In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive effective

August 13, 2005, we would like to notify you that this product may contain regulated materials which, upon disposal,

require special reuse and recycling processing. For this reason Paradigm Electronics Inc. (the manufacturer of

Paradigm speakers and Anthem electronic products) has arranged with its distributors in European Union member

nations to collect and recycle this product at no cost to you. To find your local distributor please contact the dealer

from whom you purchased this product or go to our website at www.paradigm.com.

Please note that only the product falls under the WEEE directive. When disposing of packaging and other shipping

material we encourage you to recycle through the normal channels.

16. Object and Liquid Entry – Never push objects of any kind through openings as they may touch dangerous voltage points

or short-out parts that could result in a fire or electric shock. Do not expose this product to dripping or splashing and

ensure that no objects filled with liquids, such as vases, are placed on the product.

17. Servicing – Do not attempt to service this product yourself, as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified personnel under

the following conditions:

• When power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper adjustment of other controls may result in damage and will require

extensive work by a qualified technician to restore the product to its normal operation.

• If the product has been dropped or damaged in any way.

• If the product exhibits a distinct change in performance – this indicates a need for service.

19. Replacement Parts – When replacement parts are required, be sure the technician has used replacement parts

specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may

result in fire, electric shock, or other hazards.

20. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating condition.

21. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

SECTION PAGE

1. INTRODUCTION

1.1 Before Making Conne tions............................................................. 1

1.2 In-Use Noti es ........................................................................ 1

1.3 Front Panel ............................................................................ 2

1.4 Front Panel Display .....................................................................3

1.5 Rear Panel ............................................................................ 4

1.6 Remote Control ........................................................................ 5

1.7 Speaker Pla ement .....................................................................6

1.8 Inter onne ts ......................................................................... 7

2. CONNECTIONS

2.1 Video .................................................................................8

2.2 Audio .................................................................................9

2.3 FM•AM Antennas .....................................................................11

2.4 12 Volt Triggers ....................................................................... 11

2.5 Powered IR (Infra Red) Re eivers....................................................... 11

2.6 IR (Infra Red) Emitters..................................................................11

2.7 Power................................................................................11

3. SETUP

Entering / Navigating / Exiting the Setup Menu ............................................... 15

3.1 Video Output ......................................................................... 16

3.2 Set Time and Timers................................................................... 21

3.3 Speaker Configuration................................................................. 24

3.4 Listener Position ......................................................................29

3.5 Level Calibration ..................................................................... 30

3.6 Sour e Setup ......................................................................... 32

3.7 Mode Presets......................................................................... 36

3.8 Analog Input Levels....................................................................37

3.9 ADC and Audio Output ................................................................ 38

3.10 Volumes and Path Names ..............................................................39

3.11 Triggers, IR, and RS-232 ............................................................... 40

3.12 Displays and Timeout.................................................................. 42

3.13 Save and Load Settings ................................................................44

3.14 Lo kout and Passwords ............................................................... 45

3.15 ARC-1 Anthem Room Corre tion ........................................................ 46

TABLE of CONTENTS

4. OPERATION

4.1 Power On and Off ..................................................................... 50

4.2 Path Sele tion........................................................................ 50

4.3 Manually Copying the Main Path to Zone2/3 and Re ord ...................................51

4.4 Sour e Sele tion ..................................................................... 51

4.4.1 FM•AM Tuner 52

4.4.2 Simul ast 52

4.5 Volume Control ....................................................................... 53

4.6 Level Trim ...........................................................................53

4.7 Bass, Treble, and Balan e ............................................................. 54

4.8 Surround Modes ...................................................................... 54

4.8.1 AnthemLogi 55

4.8.2 Dolby Digital 2.0 55

4.8.3 Surround Modes for 2.0-Channel Sour e Material 56

4.8.4 Dolby Digital EX and Pro Logi IIx for 5.1-Channel Sour e Material 57

4.8.5 DTS-ES 57

4.8.6 THX Ultra2 and THX Surround EX 57

4.8.7 Mode and THX Operation for 2.0-Channel Sour e Material 61

4.8.8 Mode and THX Operation for Dolby Digital 5.1 and 6-Ch S/E 62

4.8.9 Mode and THX Operation for DTS Sour e Material 63

4.8.10 Dynami s 64

4.9 Lip-Syn Delay ........................................................................64

4.10 Display Brightness ................................................................... 64

4.11 Video Sour e Adjustment .............................................................. 64

Pi ture 65

Crop Input 67

S ale Output 68

Aspe t Ratio Control Examples 69

Output 71

Test Patterns 72

Info Panel 73

Short uts and emergen y exits 73

4.12 Sleep Timer ...........................................................................74

4.13 Enable and Disable Timers............................................................. 74

4.14 Status Display.........................................................................74

5. REMOTE CONTROL CUSTOMIZATION

5.1 Codes for Other Brands ................................................................ 75

5.2 Learning Commands................................................................... 75

5.3 Copying Commands ....................................................................76

5.4 Volume Lo k ......................................................................... 76

5.5 Programming Ma ros ..................................................................77

5.6 Resetting the Remote Control .......................................................... 77

6. SOFTWARE UPDATING

6.1 Software Version Identifi ation ........................................................ 78

6.2 Software Updating Via Your Dealer......................................................78

6.3 Software Updating Via Your Computer and the Internet ....................................78

Appendix A – IR Ma ros for Surround Modes and FM•AM Banks 80

Appendix B – Preset Memory Codes 81

Spe ifi ations 88

Warranty 91

Big Pi tures of Front and Rear Panels Inside Ba k Cover

1. INTRODUCTION

Thank you for purchasing the Anthem Statement D2 processor.

The Statement D2 is a cutting-edge home theater audio processor with HDMI switching and video

upconversion, multizone capabilities, and FM/AM tuner, along with state of the art video processing which

includes deinterlacing, scaling, aspect ratio control, and picture adjustment. Anthem products are

engineered to recreate the passion of live performance and thrill of the best movie theaters by using the

highest level of circuit design, proprietary software, superior build quality, innovative features, and intuitive

ergonomics with tremendous flexibility.

1.1 BEFORE MAKING CONNECTIONS

Check that you have received everything listed below and report discrepancies to your dealer as soon as

possible. In case they are needed one day, keep the packing materials and the invoice that you received from

your authorized Anthem dealer at time of purchase – without it, service will not be provided under warranty.

Packing List:

Statement D2 FM antenna IR terminal block (on rear panel)

2 Remote controls FM antenna adapter Power cord (North America only)

4 AA batteries AM loop antenna Serial extension cable

Additional items with ARC-1 Anthem Room Correction:

Software installation CD Microphone Telescopic stand

USB microphone cable Microphone clip Base

Safety Instructions:

Read all precautions and instructions at the beginning of this manual.

Do not connect power if there are signs of damage to any part of the exterior.

The front panel power buttons and the rear panel AC switch do not disconnect the product from the

AC line. Ensure that the power cord remains readily accessible at all times.

To connect power, only use the supplied double-insulated power cord.

Allow adequate ventilation to ensure reliable operation and to prevent overheating. The amount of

space required above the unit for radiation depends on ambient air temperature and circulation.

Installation inside an unventilated space such as a cabinet with a front that can be closed or a

closet is not recommended.

Failing to comply with any safety instruction, precaution, or warning in this operating manual is in

violation of the intended use of the product.

Anthem and any related party assume no liability for the user’s failure to comply with requirements.

1.2 IN-USE NOTICES

Disconnect the power cord before connecting or disconnecting any components.

Do not remove the top cover.

Do not modify the product.

Due to continuing advances operational characteristics may change. If this manual contains

discrepancies please check www.anthemAV.com for the latest manual or software.

1.3 FRONT PANEL

1– Path selection

2– Mode and decoder indicators

3– Display

4–FM AM preset selection

5–FM AM tuning / setup menu navigation

6– Master Control Knob:

Volume

Tune for FM AM

Settings adjustment

Setup for time and source naming

7– Speaker group and headphone access

8– Power on / standby

9– Mute

10 – Status review / setup menu access

11 – Balance setting

12 – Bass / treble settings

13 – LED and display brightness setting / video adjustment

menu access

14 – Front panel IR sensor

15 – Surround mode / Dynamics / THX options / shortcuts

to most common video adjustments

16 – Headphone jack

17 – Source selection

1. INTRODUCTION continued …

For a larger diagram, see inside back cover.

1617 15 14 13 12 11 10 9 8

5 64321

Andere Handbücher für Statement D2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Anthem Computerhardware Handbücher

Anthem

Anthem AVM 90 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung