AOpen AX6L Bedienungsanleitung
Quick Installation Guide
~1~
Thanks for purchasing AOpen's AX6L motherboard. This Guide will help you installing the system.
Following figure shows the location of the jumpers and connectors on this motherboard:
AX6L implements many special features as following:
Jumper-less Design Pentium II VID signal and SMbus clock generator provide CPU voltage
auto-detection and allows user to set CPU frequency through CMOS setup, no jumper or switch is
needed.
Battery-less Motherboard AX6L implements EEPROM and special circuit (patent applied) that
allows you to save your current CPU and CMOS Setup configurations without the need of battery.
The RTC (real time clock) can also keep running as long as power cord is plugged.
Suspend to Hard Drive This function saves your work to HDD and resumes within a short time.
Modem Wake Up Through this feature, it is possible to have system totally power off and
wakeup to automatically answer a phone call, such as answering machine or to send/receive fax.
RTC Wake Up Timer Program the date/time to wake up your system.
Over-current Protection Full line (5V, 12V, 3.3V and CPU) over-current protection to prevent any
accident short circuit.
CPU Thermal Protection Warning when CPU temperature is higher than a predefined value.
Fan Monitoring Two fan connectors, warning when CPU or housing fan is malfunction.
System Voltage Monitoring This design will monitor your system working voltage continuously.
Switching Regulator High efficient switching regulator for future CPU.
75/83.3MHz External Clock For user's convenience, AX6L supports 75/83.3MHz external clock.
Please note that it is user's risk to do over-clocking.
FCC DoC certificate AX6L has passed FCC DoC test. The radiation is very low, you can use
any kind of housing.
Note: This Quick Installation Guide is only for quick reference. For more information,
please see the User's manual.
JP14: Clear CMOS
Panel
HDD LED
WKUP: Wake Up connector
CPU FAN
CPU SLOT 1
FDC connector
IDE1 connector
IDE2 connector
FAN
PWR2: ATX Power
USB connector
PS/2 MS and KB2 connector
COM1, COM2 and PRINTER
IrDA connector
Quick Installation Guide
~2~
This motherboard supports Pentium II (Klamath) VID funtion, the CPU core voltage is
automatically detected, the range is from 1.3V to 3.5V.
The CPU frequency selection is set by going into:
BOIS Setup
à
Chipset Features Setup
à
CPU Clock Frequency
(The possible setting is 66, 68.5, 75 and 83.3 MHz)
BOIS Setup
à
Chipset Features Setup
à
CPU Clock Ratio
(The possible setting is 1.5x, 2x, 2.5x, 3x, 3.5x, 4x, 4.5x, 5x, 5.5x, 6x, 6.5x, 7x, 7.5x, and 8x)
Core frequency = Ratio * External bus clock
INTEL Pentium II CPU Core Frequency Ratio External Bus Clock
Klamath 233 233MHz = 3.5x 66MHz
Klamath 266 266MHz = 4x 66MHz
Klamath 300 300MHz = 4.5x 66MHz
Klamath 333 333MHz = 5x 66MHz
Plug in the fan cable to the 3-pin CPU FAN or FAN
connector. Both of these two fan connectors can support
hardware monitoring function, however, you can only
use the CPU FAN connector to control the fan power
ON/OFF.
Some of Seagate HDD models listed below may have compatibility issue with 3.3V PIIX4
chipset (Intel 440LX and 430TX PCIset). These HDD can only accept 3.1V as high level
signal (actually, it should be 2.0V for TTL), and PIIX4 uses 3.3V, that makes these HDD have
possibility that can not recognize output from PIIX4. Please avoid of using these HDD.
Belize: ST32177A, ST31720A, ST32531A and ST33240A.
Maui (without Ultra DMA support): ST31010A, ST32120A, ST31721A, ST33220A and
ST34340A.
To preserve the earth, AOpen AX6L implements the world first battery-less motherboard
design. There is no need to have battery for RTC (real time clock) and CMOS Setup as long
as ATX power cable is plugged. In case of the AC power is shutdown or power cord is
removed by accident, the CMOS Setup and system configuration can be restored from
EEPROM, only the system clock needed to be re-set to current date/time.
Settin Setting CPU Core Voltage
Settin Setting CPU Frequency
Settin Connecting CPU Fan
Settin Compatibility issue between Intel PIIX4 chipset & Seagate HDD
Battery-less Motherboard
Quick Installation Guide
~3~
Attach the power LED, keylock,
speaker, and reset switch connectors
to the corresponding pins.
1
Speaker
Power LED
Keylock
Reset
11
10
20
+
+
+
+
To enter the BIOS Setup, press during POST (Power-On Self Test). Choose "Load
Setup Defaults" for recommended optimal performance. Please avoid of using "Load Turbo
Defaults", unless you are sure your system components (CPU, DRAM, HDD, etc.) are good
enough for turbo setting. For detailed information, please refer to "AWARD BIOS" section in
the User's Manual.
Intel has introduced 430TX or 440LX chipset with latest feature of "ACPI", "USB" & "Ultra
DMA/33". Since these devices are so new that Win95 did not anticipate to support them on
Aug. of '95 which Win'95 initially is being released. To solve this problem, AOpen software
team spends few weeks to develop an utility --AOchip.exe. You can find this utility in the
bundled CD title or from our web site. It is very user friendly and can be used on any TX/LX
mainbaord, not limited to AOpen's motherboard. For using this utility, run aochip.exe directly.
You need the bus master IDE driver and the bus master IDE HDD to support bus master IDE
mode. This driver is available in the bundled CD or our web. You may run setup.exe directly
to install this program.
Warning: Installing this driver may cause Suspend to Hard Drive failure.
When CPU temperature is higher than a predefined value, the CPU speed will automatically
slow down and the PC speaker will beep. To work with this feature, AOpen software team
develope an utility HWMON2, which can help you monitor the CPU temperature and voltage.
This program is available in the bundled CD title or our homepage.
In conjunction with ATX soft power On/Off, it is possible to have system totally power off and
wakeup to automatically answer a phone call such as answering machine or to send/receive
fax. The most important break through is not only external box modem but also internal
modem card can be used to support Modem Wake Up. AX6L and MP56 internal modem card
implement special circuit to make sure the modem card work properly without any power. For
more information about Modem Wake Up, please see the user's manual.
Settin Load BIOS Setup Default
Settin Eliminate "?" marks in Win95
Settin Installing Ultra DMA/33 Driver
Settin Connecting Front Panel Cable
Settin CPU Thermal Protection
Settin Modem Wake Up
Quick Installation Guide
~4~
Option 1: Use /file switch (applied to FAT16 file system):
Please use following command to create a hidden file in the root directory of your hard disk for
Suspend to Hard Drive to save the system status and memory image.
C:>AOZVHDD /c /file
Please make sure that you have enough continuous HDD space for creating this hidden file.
For example, if you have 32MB of system memory and 4MB of VGA memory, you need at
least 36MB (32MB + 4MB) of continuous HDD space. If AOZVHDD failed to allocate the HDD
space, you may run "DEFRAG" Utility or "Disk Defragmenter" which come with MS-DOS or
Win'95 to free HDD space.
Option2: Use /partiton switch (applied to FAT16/FAT32 file system):
To create a separate partiton for Suspend to Hard Drive, please make sure you have reserved
a free partition. We suggest you reserve the free partition which space is appropriate for your
future memory expansion. For example, if you have 32MB of system memory and 4MB of
VGA memory currently, but you plan to upgrade system memory to 64MB in the near future,
then you may reserve a 68MB (64MB+4MB) space by using a disk utility (such as fdisk). Next,
use following command to create a suspend partition:
C:>AOZVHDD /c /partition
If there is no extra free partition and you don't want your data lost, please do not use this
partition method.
For more information, please see user's manual.
To upgrade your BIOS, please follow the steps as below:
1. Get new BIOS binary file from AOpen's web site. For example, AX6L130.BIN.
2. Bootup the system from floppy without loading any memory handler (such as EMM386) or
device driver.
3. Execute C:> AOFLASH AX6L130.BIN
4. After loading the new BIOS code, the utility will prompt you to save original BIOS code
into your HDD or floppy. Please press "Y" to store it as "BIOS.OLD".
5. After the old BIOS has been successfully saved, press "Y" to replace BIOS.
6. DO NOT turn off the power during "FLASHING".
7. Reboot the system by turn off the power after "FLASHING".
8. Press "DEL" key to enter BIOS setup during POST.
9. Reload the "BIOS SETUP DEFAULT" and reconfigure other items as previous set.
10. Save & Exit. Done!
For more information, please refer to "BIOS Flash Utility" in the user's manual.
Settin How to use Suspend to Hard Drive?
Settin How to Upgrade BIOS?
Settin
More help for latest information:
Taiwan: http://www.aopen.com.tw
USA: http://www.aopenamerica.com
http://www.aopen-usa.com
Europe: http://www.aopen.nl
DOC NO. : AX6LQG-3-E9711A
Andere Handbücher für AX6L
1
Inhaltsverzeichnis
Andere AOpen Hauptplatine Handbücher
AOpen
AOpen AX4B-133 Datenblatt
AOpen
AOpen AX3SP-U Einrichtungshandbuch
AOpen
AOpen AK77 Pro(A)-133 Einrichtungshandbuch
AOpen
AOpen AX4SG WLAN Bedienungsanleitung
AOpen
AOpen MX6B EZ Bedienungsanleitung
AOpen
AOpen AX45H-8X Max Einrichtungshandbuch
AOpen
AOpen DXPL-U Einrichtungshandbuch
AOpen
AOpen AK86-L Einrichtungshandbuch
AOpen
AOpen AX45-8X Max Einrichtungshandbuch
AOpen
AOpen DX34R-U Datenblatt
AOpen
AOpen MoDT i965GMt-LA Bedienungsanleitung
AOpen
AOpen MX4GV Einrichtungshandbuch
AOpen
AOpen MX46-533 Max Einrichtungshandbuch
AOpen
AOpen i865PEa-7ILFR Datenblatt
AOpen
AOpen ATA Bedienungsanleitung
AOpen
AOpen AX34 Pro II Einrichtungshandbuch
AOpen
AOpen AX4GE Tube-G Datenblatt
AOpen
AOpen AX4T II-533 Einrichtungshandbuch
AOpen
AOpen AK77-600GN Datenblatt
AOpen
AOpen MX4GR Einrichtungshandbuch
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
