aoyue FEK-01 Bedienungsanleitung
Instruction Manual
Thank you for purchasing the Aoyue FEK-01 Soldering Fume
Extractor.
Please read the manual before using the unit.
Keep manual in accessible place for future reference.
Fume
Extractor
FEK-01
AOYUE
®
2
This manual is designed to familiarize and instruct the
technician with the proper operation and maintenance
of the equipment. Please read carefully and observe the
guidelines in order to maximize usage and minimize the
risk of injury or accidents .
TABLE OF CONTENTS
Warnings …....…………………………………… 3
Safety Precautions …....…………………………………… 4
Product Description …....…………………………………… 5
Package Inclusion …....…………………………………… 6
Box Contents …....…………………………………… 7
Specifications …....…………………………………… 8
Control Panel Guide …....…………………………………… 9
Operating Guidelines ……………………………… …. 10-16
3
WARNING!!!
◆ REMOVE ALL PLASTIC COVERING FROM FEK-01 SYSTEM,
PARTS AND COMPONENTS, CARBON FILTER AND HEPA FILTER.
!RISK OF FIRE IF PLASTICS ARE NOT
REMOVED!
◆ WARNING OVER EXTENDING ARM MAY UNBALANCE AND
TOPPLE FEK-01 SYSTEM.
◆ When placing the HEPA filter into the unit make sure to place
filter in the center of the unit and take note of the “This side
up “ and arrow pointing upwards sign.
4
CAUTION: Improper usage can cause serious injury to personnel and/
or damage to equipment and work area.
For your own safety, please observe the following precautions.
SAFETY PRECAUTIONS
● Check each component after opening the package to make
sure everything is in good condition. If there are any sus-
pected damage, do not use the item and report the issue to
your vendor.
● Turn OFF the main power switch and unplug the device from
power source when moving the device.
● Do not strike or subject the main unit (and all its compo-
nents) to physical shock. Use carefully to avoid damage to
any part.
● Handle with care.
- Never drop or sharply jolt the unit.
- Contains delicate parts that may break if the unit is
dropped.
● Make sure the equipment is always grounded. Always con-
nect power to a grounded receptacle.
● Disconnect the plug from the power source if the unit will
not be used for a long period.
- Turn off power during breaks, if possible.
● Use only genuine replacement parts.
- Turn off power and let the unit cool down before replacing
any part.
● Do not alter the unit, specifically the internal circuitry, in any
manner.
5
PRODUCT DESCRIPTION
◆ Portable Fume Extraction System with Integrated
Filter Module includes HEPA Filter (High Efficiency
Particulate Air filter) For Removing the Dust
Particles and Enhanced Activated Carbon filtration
system.
◆ With actual Carbon filter beads that trap odor and
toxins .
◆ Activated carbon beads are utilized to it’s optimum
efficiency.
◆ Powerful suction, Quiet operation.
◆ Electronic Control Panel with Variable airflow
adjustment.
◆ Excellent cost performance filters.
◆ HEPA filter filters out 97% of particles greater than
0.3μm
◆ Sub-filters extend the life of main filters.
◆ Free standing arms .
◆ Includes special nozzle with integrated LED lamp
and activated carbon sub-filter pads.
◆ Portable with wheels for easy relocation
◆ Arms can be bent as desired and maintain their
shape after adjustment.
6
PACKAGE INCLUSION
1 unit Station with Main filter and Carbon filter
2 pc. Extra activated carbon sub-filter pads
2 pc. Exhaust arm kit
2 pc. Filter hood with LED lamp and activated
carbon sub-filter pads
1 pc. Air inlet cover for single arm operation
1 pc. Instruction Manual
4 pc. Wheels with breaks
1 pc. Power Cord
Notes:
● LED lamp batteries not included. Due to shipping reg-
ulations batteries are not included in the package for
safety. Please use a 9V battery for the LED light.
● Main filter and carbon filter are inside the station
please remove the plastic covering of these filters be-
fore usage.
Filter part numbers:
FEK-MF –Main filter
FEK-CF—Carbon filter
7
BOX CONTENTS
1 pc. Main external box (BOX A)
1 pc. FEK Station box (BOX B)
2 pc. Filter hood box (BOX C)
1 pc. Parts box (BOX D)
BOX A Main external box contents
1. Arm x2
2. FEK Station box (Box B) x1
3. Filter hood box (Box C) x2
4. Parts box (Box D) x1
BOX B FEK station box contents
1. FEK station x1
2. User manual x1
BOX C Filter hood box contents
1. LED nozzle x1
2. Sub filter x1
BOX D Parts box contents
1. Wheels x4
2. Air inlet cover x1
3. Power cord x1
A
B
C
D
8
SPECIFICATION
Voltage Input : available in 110V / 220V
Dimensions: 320(w) x450 (h) x 260 (d) mm
Weight: 8.5Kg
Power Consumption: 80-200W
Filter: HEPA Filter / Carbon Filter
LED DISPLAY
AC
Connector
Exhaust Air
duct Power Switch
Controls
CARBON FILTER
Arm
Filter hood
9
SPECIFICATION
CONTROL PANEL GUIIDE
1. Selected power display
2. ON/OFF button (long press to activate,
long press to deactivate).
3. Increase button
4. Decrease button
1
3
5
4
10
OPERATING GUIDELINES
Assembly:
A. Attach Wheels
+ Attach wheels
Pull out FEK-CF carbon
filter and remove plastic
covering before usage.
B. Remove Plastic coverings of the carbon filter and HEPA filter.
Unlock top cover and
pull out the FEK-MF
HEPA filter. Remove
plastic covering from
HEPA filter.
Andere Handbücher für FEK-01
1
Inhaltsverzeichnis
Andere aoyue Dunstabzugshaube Handbücher
