11. Connect to the destination you would like to Read the EDID
a. Toggle MODE to <1> for READ EDID
b. Toggle BUFFER to <1> to store EDID in memory 1
c. Press WRITE/CHECK to upload
Note: When download is successful, the LED will flash once, otherwise, it will
display <Er>
Store EDID to PC
12. Repeat steps 1 to 4
13. Enter Buffer number to store the EDID
14. Enter the EDID file name ending with .bin
Compared EDID
15. Connect to the destination you would like to load the EDID
a. Toggle MODE to <3> for CHECK EDID
b. Toggle BUFFER to <1> for EDID that is stored in memory 1
c. Press WRITE/CHECK to CHECK
Note: When upload is successful, the LED will flash once, otherwise, it will
display <Er>
© 2019 APANTAC LLC. All rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921
The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac
makes no representation or warranties with respect to the accuracy or completeness of the contents of this
publication and reserves the right to make changes to specification and product descriptions at any time
without notice
