Apantac UE Series Bedienungsanleitung
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA
[email protected], TEL: +1 503 968 3000, FAX: +1 503 389 7921
UE Series of Multiviewers
HDMI 2.0 4K/UHD
Multiviewers
INSTALLATION MANUAL
1.6
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
1
COPYRIGHT & TRADEMARK
Copyright © 2010 Apantac LLC. All rights reserved by Apantac LLC, Beaverton, Oregon, USA. No part of this
document may be reproduced in any form or by any means without written permission from the product
manufacturer. Changes are periodically made to the information in this document. They will be
incorporated in subsequent editions. Apantac may make improvements and /or changes in the product
described in this document at any time. Apantac, Tahoma, MT Hood and Crescent are registered
trademarks of Apantac LLC; all other trademarks are the property of their respective holders.
Table of Contents
1.0 What’s in the Box ..................................................................................... 2
2.0 Key Features ............................................................................................ 2
2.1 Specifications.......................................................................................................3
2.2 Rear Views............................................................................................................5
3.0 Hardware boot up ................................................................................... 7
4.0 Software................................................................................................... 7
4.1 Configuring the UE series.............................................................................11
5.0 Common features and configurations................................................. 12
5.1 Editing mode .....................................................................................................12
5.2 System level settings....................................................................................13
5.2.1 Set output timing..........................................................................................13
5.2.2 Sources, Names, Tally and Other Setups.............................................13
5.2.3 Set Tally colors...............................................................................................19
5.2.4 System Settings............................................................................................19
5.2.5 Audio reference settings ...........................................................................20
5.2.6 Load/Save presets........................................................................................20
6.0 Editing.................................................................................................... 22
6.1 To delete a window .........................................................................................22
6.2 UE series window sizing ...............................................................................24
6.3 How to turn a window back on..................................................................24
6.4 Customize Window Elements....................................................................25
7.0 Saving Default Layout........................................................................... 41
8.0 Offline Mode .......................................................................................... 42
9.0 UE-x-K .................................................................................................... 43
9.1 KVM capable UE-4 and UE-8 .......................................................................43
9.2 Recalling Presets from Keyboard..............................................................44
Appendix: Cable Pinouts............................................................................. 45
Warranty Statement......................................................................................... 46
Contact Apantac Technical Support.......................................................... 47
UE Series of Multiviewers
39
1.0 What’s in the Box
QTY
PRODUCT
DESCRIPTION
1
UE-4/UE-8/UE-4-K/UE-8-K
2
Rack Ears
3
RJ50 to DB9 adapter
cable for GPI
4
DB9 Breakout Terminal
Block
1
RJ45 to DB9 adapter
cable for RS232 interface
1
North American Power
Cord. Note: Countries
outside of North America
the power cord excluded
2.0 Key Features
There are 4 models in the UE family
–UE-4 –4x1 HDMI multiivewer, up to 4 HDMI 2.0 (UHD) inputs, 1 HDMI 2.0 output
–UE-8 –8x1 HDMI multiivewer, up to 8 HDMI 2.0 (UHD) inputs, 1 HDMI 2.0 output
–UE-4-K –4x1 HDMI multiivewer with KVM functionality, up to 4 HDMI 2.0 (UHD)
inputs, 1 HDMI 2.0 output
–UE-8-K –8x1 HDMI multiivewer with KVM functionality, up to 8 HDMI 2.0 (UHD)
inputs, 1 HDMI 2.0 output
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
3
General features for all UE series
–Low latency –single frame processing delay
–Accepts up to 8 auto-detect HDMI inputs up to HDMI 2.0 (UHD). Depending on the
model
–Windows can be sized and moved freely
–Decode up to 8 embedded audio channels per HDMI input, up to a total of 64
meters
–Ethernet for configuration and extenernal control
–Dynamic UMD/labes & Tallies (TSL)
–20 standalone labels
–4 customizable logos
–16 GPIs for tallies, count up/down triggers or alarms
–Digital and Analog clocks can be sync’d with LTC or NTP
–Borders can be turn on or off
–Safe area markers
–Visual alarm tags for video/audio alarm detection
–Audio monitoring output –stereo, AES, embedded SDI and HDMI
–3-year limited warranty
2.1 Specifications
UE-4 Specifications
Model
UE-4
Description
4 input UHD HDMI multiviewer with advanced on-screen display (OSD)
Inputs
4x HDMI
Outputs
HDMI 2.0 UHD 4:4:4
Max Resolution
4096x2160 @ 60Hz 4:4:4
Power
Redundant AC inlet, 90 to 240V
Power Consumption
70W
Environment
Operating temperature 0 ~ 45 C
Operating humidity: 20 ~ 90% RH
Storage temperature: -20 ~ 60 C
Dimentions
2RU. 446 x 452 x 87 mm (L x W x H)
Weight
8.6 kg
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
4
UE-8 Specifications
Model
UE-8
Description
8 input UHD HDMI multiviewer with advanced on-screen display (OSD)
Inputs
8x HDMI
Outputs
2x HDMI 2.0 UHD
Max Resolution
4096x2160 @ 60Hz 4:4:4
Power
Redundant AC inlet, 90 to 240V
Power Consumption
70W
Environment
Operating temperature 0 ~ 45 C
Operating humidity: 20 ~ 90% RH
Storage temperature: -20 ~ 60 C
Dimentions
2RU. 446 x 452 x 87 mm (L x W x H)
Weight
8.6 kg
UE-4-K Specifications
Model
UE-4-K
Description
4 input UHD HDMI multiviewer with advanced on-screen display (OSD) and KVM
Inputs
4x HDMI
Outputs
HDMI 2.0 UHD 4:4:4 with quad-split multiviewer
Max Resolution
4096x2160 @ 60Hz 4:4:4
Power
Redundant AC inlet, 90 to 240V
Power Consumption
70W
Environment
Operating temperature 0 ~ 45 C
Operating humidity: 20 ~ 90% RH
Storage temperature: -20 ~ 60 C
Dimentions
2RU. 446 x 452 x 87 mm (L x W x H)
Weight
8.6 kg
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
5
UE-8-K Specifications
Model
UE-8-K
Description
8 input UHD HDMI multiviewer with advanced on-screen display (OSD) and KVM
Inputs
8x HDMI
Outputs
2x HDMI 2.0 UHD 4:4:4 with quad-split multiviewer
Max Resolution
4096x2160 @ 60Hz 4:4:4
Power
Redundant AC inlet, 90 to 240V
Power Consumption
70W
Environment
Operating temperature 0 ~ 45 C
Operating humidity: 20 ~ 90% RH
Storage temperature: -20 ~ 60 C
Dimentions
2RU. 446 x 452 x 87 mm (L x W x H)
Weight
8.6 kg
2.2 Rear Views
Figure 1: UE-4 rear view
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
6
Figure 2: UE-8 rear view
Figure 3: UE-4-K rear view
Figure 4: UE-8-K
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
7
3.0 Hardware boot up
There are two on/off switches on the UE series, one for each of the power supplies. Only one
power supply needs to be connected for it to operate. One the power switch is turned on; the UE
will boot in less than 10 seconds. When the HDMI output is connected to the screen, the version
information will be on the lower third of the display for about 2 seconds showing FPGA/FW
version and IP address (default IP address is 192.168.0.100) of the unit, then followed by the
Apantac logo, then the very last screen layout prior to powering off the unit.
4.0 Software
This section will help you get the UE series setup as quickly as possible.
Before you can successfully run the jDirector, you must first run the installation that can be
downloaded from the Apantac website.
After completing the Apantac jDirector software installation open the application by using the
shortcut created on the Windows Desktop or from the shortcut in the Windows Start Menu under
the APANTAC folder.
When launching the jDirector software you will first see the intialization screen.
Figure 5: JDirector Initialization screen
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
8
To connect to the multiviewer your PC must be connected to the same subnet as the multiviewer.
The IP address(es) is displayed briefly on the monitor attached to the corresponding output at
boot up.
If you are using a Windows PC, click on the ApantacGUIRUN.bat to launch; if you are using a Mac,
you can click directly on Apantac_JDirector.jar. For Mac, you might need to go into System
Preferences -> security & Privacy settings to <Allow apps downloaded from> to allow JDirector to
run.
Figure 6: Double-click on the ApantacGUIRUN.BAT to launch the JDirector
To connect to the UE multiviewer click the <Add / Remove> Multiviewer button
Figure 7: Local Area Network -> UE-x IP Address Manager
UE Series of Multiviewers
APANTAC LLC, 10200 SW Allen Blvd, Suite C, Beaverton, OR 97005 USA
info@apantac.com TEL: +1 503 968 3000, FAX: +1 503 389 7921
9
Click the Please select one drop down menu and select correct model.
Figure 8: Add UE-x
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Apantac Monitor Handbücher
