IMPORTANT SAFTEY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS INSTALLATION AND
OPERATING GUIDE AND THOSE MARKED ON THE UNIT. RETAIN THIS GUIDE FOR FUTURE REFERENCE.
This unit has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use,
and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE ANY COVERS OR SUB-ASSEMBLIES, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGES. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
• Read these instructions. – All of these safety and operating instructions should be read before this product is operated
• Keep these Instructions. – The safety, operating and use instructions should be retained for further reference.
• Heed all warnings. – All warnings on the product and in the operating instructions should be adhered to.
• Follow all instructions. - All operating and use instructions should be followed.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the prong does not fit into your outlet, consult an electrician of the obsolete outlet.
• Do not use this apparatus near or water. – Do not expose apparatus to dripping or splashing and ensure that no objects filled
with liquids, such as vases, glasses or cups are placed on this apparatus. Do not operate on or near wet surfaces such as
swimming pools and do not expose to rain.
• Clean only with dry cloth. – Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners.
• Do not block ventilation openings. Install in accordance with manufacturer’s instructions. – Slots and openings in the
assembly are provided for ventilation, to ensure reliable operation of the product, and to protect from overheating. Care
should be taken never to block these openings in any operating situation.
• Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Protect the power cord from being walked upon or pinched, particularly at the plugs, convenience receptacles, and the point
where they exit from the unit.
• Only use attachments/accessories specified by the manufacturer.
• Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long period of times.
• Refer all servicing to qualified service personnel. Service is required when the apparatus has been damaged in any way, such
as power-supply cord or plug damaged, liquid has bee spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
• To completely disconnect mains power from this apparatus, the power supply cord must be unplugged.
• Check AC power source for correct voltage and sufficient current capacity.
• Unplug the unit from AC mains before moving, servicing, or cleaning.
• Do not use frayed or damaged power cords or connectors.
• Do not place the unit on an unstable surface.
• Do not operate and immediately unplug equipment from AC mains if liquid has entered the unit.
• Do not plug unit into AC mains if it has physically been damaged in any way.
• Secure and protect ALL cabling to and from the units to prevent they being walled on, pinched, or pulled.
• Do not install the unit in areas of high electromagnetic or RF fields.
• Observe proper procedures for lifting and moving this unit as its weight and size requires that more than a single person be
employed in these operations.
• Should the unit be damaged in any way or contaminated with liquid, have the unit inspected and serviced by qualified service
personnel.
• This unit contains no user serviceable parts. All servicing must be performed by a qualified service engineer or through APB-
DynaSonics or its qualified dealer.
• Operate in accordance with U.S. Governments’ Occupational and Health Administration (OSHA) requirements, specifications,
suggestions and regulations or those of any other local governing requirements where the equipment is to be used or serviced.
