Apex Digital FLiK Bedienungsanleitung
BASE Canopy User Manual
(11.2018)
1
The information contained in this manual is time sensitive. Because the sport
of fixed object parachuting (BASE jumping) is evolving rapidly, some of this
information will change over time. Contact Apex BASE if you have any
questions about your gear that are not addressed in this document.
!!! WARNING !!!
Parachuting is dangerous. You can be injured or killed while BASE jumping
as others have, even when your equipment is used properly. It is your
responsibility to prepare yourself and your family for any and all possible
outcomes that may arise from your participation in this activity. Parachutes
can malfunction even when they are properly designed, built, assembled,
packed, maintained and used. The results of such malfunctions are
sometimes serious injury or death. If you are unwilling to accept full and
complete responsibility for your activity you may return unused equipment
to Apex BASE for a complete refund (before use, and within 30 days of
purchase). By keeping or using any equipment you are accepting full
responsibility and agree not to take legal action or make claims against The
Uninsured Basic Research Inc., DBA Apex BASE, its directors, owners,
shareholders, officers, employees, designers, or suppliers.
Disclaimer – No Warranty
Because of the unavoidable danger associated with the use of parachute
equipment, the manufacturer makes no warranty, either express or implied.
The equipment is sold with all faults and without any warranty of fitness for
any purpose. The manufacturer also disclaims any liability in tort for
damages, direct or consequential, including personal injuries, resulting from
a malfunction or from defect in design, material, workmanship, or
manufacturing whether caused by negligence on part of the manufacturer or
otherwise. By using this equipment, or allowing it to be used by others, the
buyer, and/or user, waives any liability for personal injuries or other
damages arising from such use. If the buyer declines to waive liability on the
part of the manufacturer, the buyer may obtain a full refund of the purchase
price by returning the equipment and all parts, before it is used, to the
manufacturer within 30 days from date of delivery with a letter stating why
the equipment was returned.
2
Apex BASE Parachute Systems
Description
All modern Apex BASE canopies are 7-cell designs with low aspect ratios,
bottom skin vents, and relatively docile handling characteristics when
compared to more common skydiving parachute designs. It is these design
elements, among others, which differentiate them from more common
parachutes. It is highly recommended that you seek proper training and
instruction as to the correct assembly, packing, and use of this system
before attempting to BASE jump.
While each of our canopies (FLiK II, Lynx, Lobo) have their own unique
performance characteristics they are all highly versatile and designed for
all-around BASE jumping use. Each of these canopies can be jumped on low
slider-off objects all the way up to wingsuit flights (and everything in
between). Understand the opening and flight characteristics of your canopy
before deciding to take it on any particular jump, and if you have questions
about your canopy do not hesitate to contact us.
Before BASE jumping any canopy it is recommended that you first fly it in
the skydiving environment which offers relatively more safety and increased
margin for error when compared to BASE.
Assembly
These canopies have three areas of assembly - the connector links to the
risers, the toggles to the control lines, and the bridle attachment to the
bridle.
1. Connector Links to Risers: Each connector link will have its own
continuity concerns. Be sure to check each connector link separately
for proper continuity. Tighten all 4 connector links by hand as tight as
possible. Then with a 9mm wrench apply another quarter turn to all 4
links. No other tool, only a 9mm wrench, should be required to tighten
or loosen any link. Do not over tighten any link as over tightening can
crack the barrel of the link. A cracked link may fail during use. Slide
the link covers over the tightened links. These covers are not only
slider bumpers, link covers help maintain proper orientation of the link
3
during deployment. Be sure to leave a portion of the link covers
ABOVE the hard link, to protect your slider grommets from coming into
contact with the stainless steel links. Do not place these link covers so
low on your links that the brass slider grommets are able to make
contact with the steel links when the slider descends. These links can
damage your brass slider grommets and ultimately damage your lines.
a. Soft Links: If you are using Soft Links to connect your canopy
to your container be sure to educate yourself on how they are
assembled, as well as the pros and cons associated with them.
Soft links can be more time consuming to install/remove, but
provide more strength and comfort than stainless steel
connector links with less weight.
2. Toggles to Control Lines:
a. Slider Off (EZ Grab Toggles): Your toggles will need to be
assembled to your canopy control lines. Depending on whether
you’ll be jumping with or without a slider there are a few
different ways to route your control lines and we recommend
that you educate yourself about these options. To attach your
toggle to the control line pass the control line through the toggle
grommet from the velcro side and then pass the bottom of the
toggle through the toggle setting in the control line. Pull the line
taught and make sure your toggle is securely attached to the
line. For more information on Apex BASE canopies that have two
toggle settings, see THIS ARTICLE .
4
b. Slider On (WLO Toggles): WLO Toggles should be used when
jumping slider up and are easily assembled to your canopy
control lines. Pull down the velcro lanyard on the front of the
toggle until the pin is pulled far enough below the grommet to
allow your control line to pass through. Pass the control line
through the toggle grommet from the velcro side (rear side from
the jumpers perspective) and pass the pin through the toggle
setting on the control line. Make sure the pin is fully seated and
5
the control line is securely assembled to the toggle. Re-mate the
lanyard velcro on the front of the toggle and re-stow the retainer
tab.
3. Bridle Attachment to Bridle: A 2 pin bridle will come as part of your
harness-container system and must be properly assembled to your
canopy.
a. If you are using a Multi-2 system, be sure to correctly assemble
the Multi-2 lines to your canopy using larks head knots. The
Type 4 (1 inch) Tape will be assembled to the canopy main
attachment point. The Dacron line will assemble to the Multi-2
attachment point which is aft of the main attachment point
toward the tail of the canopy.
6
b. Locate the loop on the bridle end closest to the pin side of the
bridle. Pass this loop through the main bridle attachment point
on your canopy, or connector loops on the Multi-2 lines.
Multi-2 Bridle Attachment: Connect the Multi-2 components to your
canopy using a larks head knot.
7
Multi-2 Bridle Attachment: Connect the bridle to your Multi-2 system
components using a single larks head knot.
c. Pass the remaining bridle through the same loop creating a larks
head knot.
d. NOTE: If you are not using the Multi-2 Tail Pocket Support
System on your Apex BASE canopy be sure to affix the bridle
ONLY to the main attachment point and NOT the Multi-2
attachment point. The main attachment point is closer to the
nose of your canopy, and the Multi-2 attachment point is toward
to the tail of the canopy.
8
If you are not using your Multi-2 System be sure to connect your
bridle ONLY to the main attachment point, and not the Multi-2
attachment point.
Brake Settings
Your canopy will come with two pre-installed brake settings. The deeper
brake setting is designed and tuned for use in the slider off environment,
while the shallow brake setting is designed to be used with a slider on higher
airspeed jumps and/or where object strike is not a concern. Educate yourself
about the different brake settings, their applications, and
strengths/weaknesses before jumping your BASE parachute.
Sliders
Apex BASE offers sliders in three sizes (measured in inches):
1. 17 x 24 : For canopies sized 200 sq./ft. and under.
2. 20 x 24: For canopies sized 210 - 250 sq./ft.
3. 23 x 28: For canopies sized 260 sq./ft. and above.
9
Only use the appropriately sized slider with your canopy, and we recommend
removing your slider when it is not being used on low airspeed deployments.
Apex BASE also offers 4 different styles of slider:
1. Large Mesh Slider
2. Small Mesh Slider
3. Slow Slider
4. Sail Slider
Take the time to educate yourself about each of these different designs and
when their use is most appropriate. Feel free to reach out to us if you have
any questions about which slider is most appropriate for your particular
application.
ALWAYS PACK AND CONFIGURE YOUR GEAR APPROPRIATELY FOR
YOUR JUMP.
Tailgate
The tailgate was invented by the team at Apex BASE and has become a
standard safety feature on all BASE canopies from every major
manufacturer. It’s function is to contain your control lines during
deployment, reducing significantly the risk of certain malfunctions. Apex
BASE recommends using a tailgate on all BASE jumps, slider up or slider off.
Extra caution should be taken when using a large mesh slider and tailgate in
order to ensure they do not interact with one another during canopy
deployment. Use only a small rubber band on the tailgate, as using large
rubber bands and/or bands not commonly used in parachuting can result in
a malfunction where the tailgate can fail to release.
Maintenance
Apex BASE canopies have several points of inspection and a few points of
common maintenance. The entire system must be inspected before each
pack job. Inspect all fabric, stitching, lines, velcro, and your tail pocket for
damage and/or wear. Inspect everything you can see. Look more closely for
the things you can not see as easily during normal packing. Velcro will wear
10
Dieses Handbuch passt für folgende Modelle
2
Andere Apex Digital Zelt Handbücher
