APG RST-5003 Bedienungsanleitung

APG

Doc #9004240

Rev A1, 05/2016

RST-5003 Control Module

User Manual

Web Enabled Series

ii Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Table of Contents

Introduction ................................................................................................................ iii

Warranty and Warranty Restrictions.................................................................... iv

Chapter 1: Specications and Options..................................................................... 1

Dimensions ........................................................................................................................................1

Specications ................................................................................................................................... 2

Model Number Congurator.......................................................................................................... 3

System Wiring Diagrams ............................................................................................................3-5

Chapter 2: Installation and Removal Procedures and Notes..............................6

Tools Needed..................................................................................................................................... 6

Connection Notes............................................................................................................................. 6

Electrical Installation ..................................................................................................................... 6

Software Setup ............................................................................................................................ 7-11

Removal Instructions ....................................................................................................................11

Chapter 3: Programming with Modbus TCP/IP...................................................12

Modbus Polling via Ethernet with Modbus TCP/IP...........................................................12-13

RST-5003 Generic Modbus Register List................................................................................... 13

Modbus Programming of Individual Sensors.......................................................................... 14

Chapter 4: RST-5003 Embedded Web Server........................................................14

Accessing the RST-5003 Embedded Web Server .................................................................... 14

Navigating the RST-5003 Embedded Web Server ..............................................................14-15

4-20 mA Sensor Input Conguration Submenus.............................................................. 16-29

Modbus Sensor Conguration Registers............................................................................ 30-32

RST-5003 Utility Menus ......................................................................................................... 33-36

Chapter 5: Maintenance ...........................................................................................37

General Care.................................................................................................................................... 37

Repair and Returns........................................................................................................................ 37

iii

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Introduction

Thank you for purchasing an RST-5003 Web Enabled Control Module from APG. We appreciate your

business! Please take a few minutes to familiarize yourself with your RST-5003 and this manual.

The RST-5003 Web Enabled Control Module oers a wide degree of integrated, exible, remote and local

control and monitoring for your system. The RST-5003 can control up to 10 APG Modbus sensors--any

combination of level, pressure, magnetostrictive and ultrasonic--along with one 4-20 mA sensor, and two

input or output relay terminals. All readings are available for control and monitoring via TCP/IP for local

or remote network access. The RST-5003 also had exible power options: it can use either POE or an

independent 12-28 VDC power source.

Reading your label

Every APG controller comes with a label that includes the controller’s model number, part number, and

serial number. The RST-5003 label also indicates the default IP address, subnet mask, and mac address.

Please ensure that the model number on your label matches your order.

iv Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Warranty and Warranty Restrictions

This product is covered by APG’s waranty to be free from defects in material and workmanship under

normal use and service of the product for 24 months. For a full explanation of our Warranty, please visit

https://www.apgsensors.com/about-us/terms-conditions. Contact Technical Support to recieve a Return

Material Authorization before shipping your product back.

Scan the QR code below to read the full explanation of our Warranty on your tablet or smartphone.

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Chapter 1: Specications and Options

• Dimensions

7/8” 4”

4 1/2”

2Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Communications

Digital Output Ethernet TCP/IP Modbus

Ethernet TCP/IP to internal web page

Ethernet TCP/IP to APG-provided website

0-2 Isolated Solid State Relays

Inputs RS-485 Modbus

4-20 mA

0-2 Discrete Switches

Electrical

Operational Supply Voltage (at sensor) 48 VDC via POE (requires injector or switch)

12-28 VDC

Current Draw 40 mA @ 48 VDC

Power Rating 2.0 W Max

Issolated SSRs 120V, 120 mA Max

Accuracy

Resolution 12 bit

Environmental

Operating Temperature -40 to 60°C (-40 to 140°F)

Materials of Construction

Housing Polyamide

Mounting

33 mm Din-Rail

Compatible APG Modbus Senors

Ultrasonic MNU

Magnetostrictive MPX-E1, MPX-R1

Pressure PT-400-L5, PT-400-L31, PT-500-L5, PT-500-L31

Controllers DCR-1006A, MND

• Specications

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

• Model Number Congurator

Model Number: RST - _____

A. Model

□ 5003 2 relay outputs

□5013 1 relay output, 1 switch input

□5113 2 switch inputs

External 12-28 VDC Source Wiring

• System Wiring Diagrams

To Network

Connection

Input for supply

voltage when

using a non-POE

power source

To 12-28 VDC

Power Source

RST-5003

4Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

POE (Power over Ethernet) Wiring

POWER

LAN + DC LAN

To Network Connection

To AC

power POE

Power

Injector

Provides 24 VDC

to supply a 4-20 mA

device when the RST

is powered via POE.

RST-5003

NOTE: A POE-enabled

Ethernet switch eliminates

the need for a POE Power

Injector.

(Ethernet Port)

270 Ω

terminating

resistor at

last sensor

Sensor 3

V+

GND

Trunk Line

Sensor 1

V+

GND

Sensor 2

V+

GND

Use shielded cable

Sensor Line Drops

Equivalent 270 Ω

terminating resistor

internal to RST-5003

Note: Terminating resistor size recommended

based on input resistance of RST-5003. Length

of cable and overall impedence of network may

necessitate a dierent size resistor.

Modbus Sensor Daisy-chain Wiring

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

System Overview - RST-5003 with Modbus and 4-20 mA sensors and Internet Connection

Network / Internet Connection

Computer

Local

Network

Computer

Internet

MNU Ultrasonic Sensors MP Magnetostrictive Float Level Sensors

4-20 mA Input

(2) Solid State Relays

Modbus

Input

Connection

Internet

Server Hosting

Website and

Logged Data

4-20 mA Type Level Sensor

RST-5003

6Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Chapter 2: Installation and Removal Procedures and Notes

• Connection Notes

• Up to 10 Modbus sensors can be connected to the RST-5003 in any combination.

• Only one 4-20 mA sensor can be connected to the RST-5003.

• You do not need any tools to install your RST-5003. Please consult each sensor’s user manual for any

sensor installation notes and instructions.

• Tools Needed

• Connect any 4-20 mA sensor, relays, or switched inputs rst.

• Connect RST to Ethernet/network.

• Connect independant 12-28 VDC supply if not using POE.

• Connect and set up one Modbus sensor at a time.

• Electrical Installation

NOTE: For any APG sensor user manual, please visit http://apgsensors.com/support.

IMPORTANT: Each Modbus sensor must be connected to the network individually and

assigned a unique Sensor Number before the next sensor can be added.

IMPORTANT: Multiple Modbus sensors added to the network simultaneously are all

assigned the same Modbus address/sensor number: 1. Sensors MUST be added to the

network individually.

Andere Handbücher für RST-5003

Inhaltsverzeichnis

Andere APG Steuereinheit Handbücher

APG

APG RST-5003 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung