Aplex OPD-1086B Bedienungsanleitung

OPD-1086B User Manual

OPD-1086B Display

User Manual

Release Date Revision

Jun. 2013 V1.0

Aplex Technology, Inc.

15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan

Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: [email protected] URL: www.aplex.com.tw

OPD-1086B User Manual

Warning!___________________________________

This equipment generates, uses and can radiate radio frequency energy and if not installed and

used in accordance with the instructions manual, it may cause interference to radio communications.

It has been tested and found to comply with the limits for a ClassA computing device pursuant to

FCC Rules, which are designed to provide reasonable protection against such interference when

operated in a commercial environment. Operation of this equipment in a residential area is likely

to cause interference in which case the user at his own expense will be required to take whatever

measures may be required to correct the interference.

Disclaimer

This information in this document is subject to change without notice. In no event shall Aplex Technology

Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or

misuse of information in this document or in any related materials.

Electric Shock Hazard –Do not operate the machine with its back cover removed. There are

dangerous high voltages inside.

OPD-1086B User Manual

Table of Contents______________________

Warning!…………………………………………………………………………….……..….2

Disclaimer………………………………………………………………….…………………2

Chapter 1 Getting Started

1.1 Features………………………………………………..………….………….4

1.2 Specifications…………………………………………....……………...….4

1.3 Dimensions…………………………………...………………………….…5

1.4 Brief Description...................................................................................7

1.5 Display Mode……………………………………………………………….8

Chapter 2 OSD

2.1 Front Panel Controls……………………………………………….…..…….9

2.2 OSD Controls…………………..…………………………………………..10

2.3 Main Menu…..………..……………………………………………………..11

2.4 AD Board (VA-3600) OSD Functions…….………………………………13

Chapter 3 Control Board

3.1 Introduction to Touch Screen Controller board…………………………..14

3.2 Windows 2000/XP/2003/Vista Universal Driver Installation for PenMount

6000Series…………………………………..……………….…………….14

Figures

Figure 1.1: Dimensions of OPD-1086B……………………………………….5

Figure 1.2: Front View of OPD-1086B………………………………………….7

Figure 1.3: Rear View of OPD-1086B………………………………………….7

Figure 3.1: Bird Eye’s View of Control Board………………………………14

OPD-1086B User Manual

Chapter 1_____________________________

1.1 Features

LED backlight

Steel Chassis

Resistive touch screen (optional)

VGA in input , 12V DC power jack

DVI-I, RCA, S-Video (optional)

11~32V power (optional)

1.2 Specifications

Display

●Display: 8”color TFT LCD display

●Maximum resolution: 800 x 600

●Maximum colors: 16.2M

●Luminance: 350 cd/m²

●Viewing angle: 125/140

●Backlight life: 40,000 hours

●OSD control: Yes

●Touch screen: resistive touch

Mechanical

●Construction: steel chassis

●Mounting: Panel Mount/VESA Mount 75 x 75

●OSD on the rear side

●Dimensions:199 (W) x 148(H) x 42 mm (D)

●Weight: TBD

Environmental

●Operating temperature: 0 to 50℃(32 to 122℉)

●Storage temperature: -20 to 60℃(-4 to 140℉)

●Relative humidity: 10 to 95% @40℃, non-condensing, without touch screen

●Vibration: 1G peak, 10~150Hz

●Shock: 15G peak acceleration (11 msec.duration)

●EMC: CE, FCC Class A

OPD-1086B User Manual

1.3 Dimensions

OPD-1086B User Manual

Figure 1.1: Dimensions of OPD-1086B

OPD-1086B User Manual

1.4 Brief Description of OPD-1086B

OPD-1086B is a 8”TFT LCD monitor that comes with viewing angle of 125 (H) degrees and 140 (V)

degrees, and more outstanding features, thus giving you the best in monitoring and control

applications. The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating

when it is panel-mounted in a NEMA rated cabinet or enclosure. It is to be equipped with a resistive

touch screen.

Figure 1.2: Front View of OPD-1086B

Figure 1.3: Rear View of OPD-1086B

OPD-1086B User Manual

1.5 Display Mode

Display Mode

Hori. Sync (KHz)

Vert. Sync. (Hz)

SVGA 800 x 600

OPD-1086B User Manual

Chapter 2_____________________________

2.1 Front Panel OSD Functions

Auto Adjust Up/Left Down/Right Power

Menu/Entry Power Indicator

Power switch: To turn ON or OFF the power

Shift the icon to the right side or shift it up

Shift the icon to the left side or shift it down

Menu: To enter OSD menu for related icon and item.

Auto Button: One-touch auto adjustment

1.) Getting into Burn-in Mode

Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)

the buttons until the AC power cord is connected and the “RGB” appears on the top left corner

of your screen. Now it can be put into the burn-in mode for changing colors.

2.) Getting Out of Burn-in Mode

Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the

button (If not workable, press the button and don’t let them go) until the AC power cord is

connected. Please don’t let your fingers go until the AC power cord is connected again and the

wording of “RGB”appears on the top left corner of your screen, and wait for 3 seconds. Under the

non-signal entry situation, if is seen, exit is thus successfully made.

Cable Not Connected

OPD-1086B User Manual

2.2 OSD Controls

To make any adjustment, select the following:

1. Press (Menu) to show the OSD menu or disable the OSD menu.

2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.

3. Press (Menu) and then choose the item with the ( / or +/-) key.

4. Press (Menu) and then adjust the quality with the ( / or +/-) key.

1.) If the “RGB”is still on the top left corner of the screen, press to enter “Miscellaneous”and

choose “Reset”, and then Yes, and press . When the screen goes black, disconnect power

and repeat the above steps.

2.) If the “RGB”is not found, disconnect the AC power cord first. Then press the buttons

(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When

“RGB”appears, repeat the above steps.

3.) Functions of OSD Keys

Inhaltsverzeichnis

Andere Aplex Monitor Handbücher

Aplex

Aplex OPD-1086 Bedienungsanleitung

Aplex

Aplex ARCDIS-132AP Bedienungsanleitung

Aplex

Aplex ARCDIS-112APRG Bedienungsanleitung

Aplex

Aplex ADP-1121 Bedienungsanleitung

Aplex

Aplex ADP-1156 Bedienungsanleitung

Aplex

Aplex ADP-1XX8P Bedienungsanleitung

Aplex

Aplex OPD-1086C Bedienungsanleitung

Aplex

Aplex ADP-1224A Bedienungsanleitung

Aplex

Aplex ADP-1151W Bedienungsanleitung

Aplex

Aplex ADP-1081A Bedienungsanleitung

Aplex

Aplex ADP-1122A Bedienungsanleitung

Aplex

Aplex ARCDIS-1 (P/G) Series Bedienungsanleitung

Aplex

Aplex ADP-1174 Bedienungsanleitung

Aplex

Aplex ADP-1080 Bedienungsanleitung

Aplex

Aplex OPD-1086 Bedienungsanleitung

Aplex

Aplex AHM-6XX6A Bedienungsanleitung

Aplex

Aplex ADP-1153 Bedienungsanleitung

Aplex

Aplex ADP-1XX0A Series Bedienungsanleitung

Aplex

Aplex ARCDIS -107 Bedienungsanleitung

Aplex

Aplex ADP- 11x6 Bedienungsanleitung

Aplex

Aplex ADP-1194 Bedienungsanleitung

Aplex

Aplex ARCDIS-118A Bedienungsanleitung

Aplex

Aplex FABS-107P Bedienungsanleitung

Aplex

Aplex ADP-1120 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung