Apogee BIG BEN Betriebsanleitung

On this ﬁrst page we will deal with connecting Big Ben to a Pro Tools HD rig without using a Sync I/O.

The next page deals with connecting with the Sync I/O.

1) Connect a 75 ohm BNC cable between the WC Out connections of Big Ben and the EXT In of each

audio interface. (as shown below)

2) Do NOT connect the LOOP Sync connections between the audio interfaces. To best take advantage of

Big Ben’s superior clock, each interface must be connected directly to a Big Ben word clock output.

Using Big Ben with Pro Tools (without a Sync I/O)

1) Determine the desired sample rate for

the entire HD system, and set Big Ben

to that Sample rate.

2) In Pro Tools software, Session>Setup>

Click on the “Clock Source” ﬁeld, select

the ﬁrst audio interface, and set its clock

source to “Word Clock”

3) Repeat Step 2 for all audio interfaces.

Note that selections made for previous

interfaces will not be checked; this is

normal.

4) Verify on the front panel of each audio

interface that Sync Mode is set to EXT.

Send a separate W/C Out of

the Big Ben to the W/C In on

each interface. Once again,

Do NOT use Loop Sync!

APOGEE Connects:

Using the Big Ben with a Sync I/O

When using a SYNC I/O with a Big Ben, we ﬁnd it best to make the SYNC I/O the master and have the Big

Ben lock to it. The Big Ben can then send its superior clock out to all of your audio interfaces. In the example

below we are using 192’s. However the setup would be the same if you were using AD and DA-16X’s or

Rosetta’s connected via the X-HD option card. The only difference would be that the set up in Pro Tools is a

bit simpler, as explained on Pg. 3 of this document.

1) Connect a 75 ohm BNC cable from Word Clock out of the Sync I/O to the Word Clock In of the Big

Ben

2) Connect a 75 ohm BNC cable between the WC Out connections of Big Ben and the EXT In of each

audio interface.

3) Do NOT connect the LOOP Sync connections between the audio interfaces or to the SYNC I/O. To best

take advantage of Big Ben’s superior clock, each interface must be connected directly to a Big Ben word

clock output.

W/C Out of the Sync I/O to

W/C In on the Big Ben. Do

NOT use Loop Sync out!

Send a separate W/C Out of

the Big Ben to the W/C In on

each interface. Once again,

Do NOT use Loop Sync!

APOGEE Connects:

1) In Pro Tools under “Set Up”> “Session”>”Clock Source”> “192 I/O #1, choose “Word Clock”

You will get a message that says “The Sync I/O clock reference is not locked” Click on the OK button.

2) Now do the same for the remaining 192’s

3) Next, under “Clock Source” you will select “Sync I/O”

4) You should now see a message that says “The Sync I/O clock reference is now locked”

If you are using Apogee converters (AD/DA-16X’s or Rosetta’s via the X-HD card) and you are not using

192’s at all, you will not have to do the following previous 4 steps. The Apogee units will automatically

lock to external W/C when the Sync I/O is set to master.

APOGEE Connects:

Andere Handbücher für BIG BEN

Andere Apogee Computerhardware Handbücher

Apogee

Apogee Mini-Me Bedienungsanleitung

Apogee

Apogee AMBus HD Bedienungsanleitung

Apogee

Apogee X-HD Bedienungsanleitung

Apogee

Apogee X-Digi-Mix Card Bedienungsanleitung

Apogee

Apogee Symphony 64 Bedienungsanleitung

Apogee

Apogee X-Video Card Bedienungsanleitung

Apogee

Apogee AD-8000 Beilage

Apogee

Apogee X-FireWire Card Bedienungsanleitung

Apogee

Apogee DA-12 Bedienungsanleitung

Apogee

Apogee AMBus Bedienungsanleitung

Apogee

Apogee X-HD Bedienungsanleitung

Apogee

Apogee UV22HR Installationsanleitung

Apogee

Apogee Mini-Series FireWire Bedienungsanleitung

Apogee

Apogee UV-1000 Bedienungsanleitung

Apogee

Apogee X-Video Card Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung