4
3
This appliance is for household use and may be plugged into any 120-volt AC electrical
outlet (ordinary household current). Do not use any other electrical outlet.
NOTE:
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, this plug fits in a polarized outlet only one way. If the plug does not fit into the
outlet, reverse the plug and try again. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
A short power-supply cord is provided to reduce the hazards resulting from entanglement
or tripping over a longer cord. An extension cord may be used with care; however, its
marked electrical rating should be at least as great as the electrical rating of the
appliance. The extension cord should not drape over the counter or tabletop, where it
can be pulled on by children or tripped over.
LINE CORD SAFETY TIPS
1. Never pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are
found, this indicates that the appliance should be serviced and the line cord
replaced. Please return it to our Service Department or to an authorized service
representative.
5. Never wrap the cord tightly around the appliance, as this could place undue
stress on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
INITIAL USE:
Before using coffee maker for the first time, wash carafe, lid and filter holder in warm,
soapy water. Rinse well and dry thoroughly. Wipe unit with a soft, slightly damp cloth or
sponge to remove any packaging dust. NEVER IMMERSE the appliance, cord or plug, in
water or other liquid.
Before brewing coffee for the first time, allow water to cycle through without coffee or
paper filter; this will clean the water reservoir and filter holder prior to initial use.
COFFEE FILTERS:
This coffee maker is designed to be used with a cone-shaped paper filter. We
recommend #2 size Melitta paper filters, available at local grocery stores or wherever
coffee makers are sold. The use of basket-style paper filters is not recommended, since
they do not conform to the shape of the filter holder and may cause coffee to back up
and spill over during brewing.
BREWING COFFEE:
Be sure On/Off button is in the Off position. Using carafe markings as a guide, measure
and pour cold water into water reservoir (Fig. 1).
NOTE: The amount of brewed coffee will measure slightly less than original water due to
absorption of water by the coffee grounds.
Lift the lid and carefully pour desired amount of water into reservoir. Markings on water
level indicator will measure capacity.
Adjust filter holder so that it fits securely in brew basket. (Notch on filter holder should
line up with notch on brew basket.) Place #2 disposable paper filter in filter holder and
add 1 level tablespoon of coffee for each cup of coffee desired. If using a scoop, use one
scoop (equivalent to two tablespoons) for every two cups of coffee. Increase or decrease
amount of coffee used to suit individual taste. Gently shake paper filter to spread coffee
evenly. Close reservoir lid.
Place lid on carafe, and then place the carafe on the warming plate. Plug into outlet and
switch ON.
To switch on, press the On/Off switch. The indicator light will illuminate, indicating that
the coffee maker is on and the brewing is in progress.
When brewing is complete, remove carafe from warming plate. For safety, always pour
coffee from carafe with lid in place. To maintain serving temperature, keep carafe on
warming plate. The warming plate will automatically cycle to keep the coffee at serving
temperature. Switch OFF when carafe is empty.
FOR A SECOND POT: Turn unit off and allow to cool for 10 minutes before brewing a
second pot. If you wait less than 10 minutes, hot water left in the tubes could splash out.
To avoid this, rinse carafe, replace filter and add fresh coffee. Place carafe on warming
plate and use another container to pour cold water into water reservoir. Use the
measurement markings on the water reservoir to determine correct amount of water.
PAUSE ’N SERVE:
The Pause ’n Serve feature will function only if the lid is properly placed on the carafe
(Fig. 2).
The Pause ’n Serve feature ensures that coffee will not drip for 30 seconds if the carafe is
removed from the warming plate while coffee is brewing. The carafe may be removed
during the brewing process to serve a cup of coffee, then placed back on the warming
plate to continue brewing process.
To use the Pause ’n Serve feature, allow the carafe to be filled with at least one or two
cups of freshly brewed coffee. Remove the carafe from the warming plate and pour
coffee into cup or mug directly from the carafe. Place the carafe back on the warming
plate.
WARNING: To avoid damaging the unit, spilling coffee or burning yourself, use the
Pause ’n Serve feature only as directed above. Do not attempt to serve a cup of coffee
by placing a cup or mug underneath the filter holder.
MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. To reduce the risk of electric shock, do not
open or remove bottom cover of unit. It contains no user serviceable parts. Do not try
to repair it yourself. Refer it to qualified personnel if servicing is needed.
TO CLEAN: At least once a month, pour one pint of white vinegar into carafe. Add cold
water until carafe is filled. Pour water and vinegar into water reservoir. Place a filter in filter
holder. Place carafe on warming plate and turn unit ON. Allow to steam and drip until
carafe is half full. Turn unit OFF, remove carafe from warming plate and let it stand for
15 minutes.
When carafe is cool, pour liquid back into water reservoir, place carafe back on warming
plate, and turn unit ON again. Allow all liquid to drip into carafe. Turn unit OFF, and
discard the liquid in carafe.
Allow unit to cool for 10 minutes; then rinse unit by filling water reservoir with clean, cold
water, inserting a new filter and turning on, allowing water to drip into carafe. Turn unit
OFF and discard water. Wash and dry carafe and filter holder. When unit has cooled, wipe
with a dry cloth.
The carafe, serving lid, and filter holder may be washed in warm, soapy water or on the
top rack of dishwasher. The unit can be wiped with a soft, slightly damp cloth and dried.
Never use abrasive scouring pads or cleanser. Never immerse unit in water or any
other liquid.
TO STORE: Unplug unit; store in its box in a clean, dry place. Never store it while it is hot
or still plugged in. Never wrap cord tightly around the appliance. Do not put any stress
on the cord where it enters the unit, as it could cause the cord to fray and break.
