Applied Engineering Sirius IIGS Bedienungsanleitung
Table Of Contents
INTRODUCTION - GETTING STARTED V
About the Vulcan v
What’s Included with the Vulcan v
The Vulcan’s Fan vi
The Power Supply vi
CHAPTER ONE- IIGS INSTALLATION 1
Installation Procedure 1
What Now? 7
CHAPTER Two - //E AND ][ PLUS INSTALLATION 9
Installation Procedure 9
What Now? 15
CHAPTER THREE - THE PARTITION MANAGER 17
First... 17
About the Partition Manager 17
Running the Partition Manager 17
From the Finder (CS and / /e retrofit Only) 18
Other Launchers 18
The MODIFY Mode 18
Entering MODIFY Mode 18
Locking/Unlocking Partitions 19
Partition Names 19
Setting the Partition Size 20
Turning Partitions On or Off 22
Selecting the Operating System 23
Selecting the Boot Partition 24
Leaving MODIFY Mode 25
Canceling/Saving Changes 25
Table of Contents I
Formatting 26
Print 26
Quit 27
Final Check 27
Quitting 27
CHAPTER FOUR - PRODOS 8, DOS 3.3, PASCAL, AND CP/M 29
ProDOS 8 29
DOS 3.3 29
Recognizing Vulcan under DOS 3.3 29
Booting from a Vulcan DOS 3.3 Partition 30
Patched DOS 3.3 Notes 30
Volume Sizes 30
Copying Files to the DOS 3.3 Partition 30
Other DOS 3.3 Goodies 34
CP/M 34
Pascal 34
CHAPTER FIVE - BACKING UP THE VULCAN 35
Introduction 35
Backup II for ProDOS 35
Number of Disks Required 35
Suggested Backup Schedule 36
Before You Back Up 36
Running Backup II 36
Backup Entire Hard Disk 36
Backup Modified Files 38
Listing Files 39
Restore Individual Files 40
ii Vulcan
APPENDICES 43
A: Trouble Shooting 45
If you can’t boot 45
ProDOS Can’t Find All Four Vulcan Partitions 45
Eight Total Drive Devices 45
Two Drive Devices per Slot 45
B: Vulcan Speed UnderGS/OS(IIGS Only) 47
C: The Vulcan Classic Desk Accessory (IIGS Only) 48
Accessing the Desk Accessory 48
Set Boot Partition 49
Write Protect Partition 49
Park Heads 49
About Vulcan... 50
Quit 50
Copy the Vulcan CDA to Your Boot Disk 50
D: Hardware 51
Switches 51
What They Do 51
How To Set Them 51
Remote Light Jack 52
E: A Brief ProDOS Tutorial 53
Operating System 53
Naming Volumes 53
Root Directory and Subdirectory 53
Pathname 54
System Files 54
Additional Resources 55
F: Getting Help 56
Returning a Product 57
RMA Number • “Attention” Sheet, and Invoice 57
When You Ship 58
When We Receive 58
Table of Contents iii
Æ
iv Vulcan
INTRODUCTION
Getting Started
About the Vulcan
What's Included with the Vulcan
On the Vulcan
The Vulcan comes preformatted and set into ProDOS partitions.
Computer Size #of Preset Contents
Partitions
IIGS 20Meg 1 GS/OS, Utils
IIGS 40Meg 2 1) GS/OS, Utils
2) Empty
IIGS l00Meg 4 1) GS/OS, Utils
2) Empty
//e,][+ 20Meg 2 1) ProDOS 8, Utils
2) GS/OS, Utils
//e,][+ 40Meg 2 1) ProDOS 8, Utils
2) GS/OS, Utils
//e, ][+ I00Meg 4 1) ProDOS 8, Utils
2) GS/OS, Utils
We’ve included GS/OS version 4.0 on the first partition of the
IIGS Vulcan. Included in the System Drivers folder is Vulcan’s
native mode driver which speeds up Vulcan’s access time
dramatically. The driver is described in App. B.
Backup II is a ProDOS backup utility for backing up the ProDOS
partitions.
The Partition Manager program (PART.MANAGER) allows you
to configure the Vulcan in up to 16 different segments. Any
partition can be set up to run under ProDOS, DOS 3.3, Pascal, or
CP/M. Also use the Partition Manager to resize, format and
activate partitions as well as select from which partition to boot.
Introduction - Getting Started V
Also the ProDOS 8 version provided on the Vulcan and the
floppy disks has been patched to allow ProDOS 8 to use four
ProDOS partitions from the Vulcan instead of only two.
The Separate Disks
The 3.5” disk is a backup of the files necessary to boot GS/OS. It
also contains the Vulcan’s utilities such as the native mode
driver, partition manager, Backup II, and a modified ProDOS 8.
If you want to reconfigure your partitions, you won’t have to
backup our utilities.
The 5.25” disk is two sided. The front side contains Vulcan’s
ProDOS 8 utilities including Backup II, Partition Manager, Park
Heads, and ProDOS patcher. The back side has the DOS 3.3
system and various DOS 3.3 utilities including Æ’s version of
FID, which support the Vulcan. (For a more complete list, see p.
34.)
The Vulcan's Fan
The Vulcan’s fan keeps the power supply and hard drive cool. If
you have several powerful cards in your computer however,
strongly consider a separate cooling fan for your system.
The Power Supply
The Vulcan’s built-in power supply replaces your computer’s
power supply. Applied Engineering designed Vulcan’s power
supply to be both more compact and more powerful than the
one included with your computer.
Features
FCC Certified
Light-weight aluminum case
Externally accessible fuse with spare.
110/220 VAC, 50/60 Hz
Built-in Fan
Cool Running
- 40˚C w/fan
- 60˚C w/o fan under full load
Power components heatsinked to case
70 full watts w/o fan
Adjustable 5 Volts DC
vi Vulcan
CHAPTER ONE
IIGS Installation
Installation Procedure
You’ll need no special tools to install the Vulcan. Simply follow
the instructions below.
1) Open Computer
Press in the two latches at the rear of the case with your
forefingers while using your thumbs to push the lid up and
towards you. (See picture following.)
Remove the IIGS cover
2) Remove Power Supply
i) Remove slot one card.
If you have a card installed into slot 1, you’ll need to remove it to
give yourself room to reach the internal power plug. Refer to
your slot 1 card’s manual for proper removal.
ii) Unplug external cord from back of computer.
This is the cord that runs from the back of the computer to the
wall socket. Unplug it from the back of the computer and from
the wall socket as well.
iii) Unplug internal cord from motherboard.
The internal power cord is the multi-wire cord running from
the power supply toward the back of the motherboard. Pull up
firmly on the white plastic part of the plug.
Ch. 1 -IIGS Installation
Unplug Internal Cord
iv) Gently pull back on tab at bottom front of power supply.
A small flatblade screwdriver may keep you from breaking a
nail.
Pull Back Tab
v) Lift out power supply.
You may want to store the power supply in the Vulcan’s box.
3) Remove Vulcan from Packing.
4) Check Voltage Setting
The switch setting on back of the Vulcan must be set to the
proper voltage (115 in the United States).
2Vulcan
5) Insert Vulcan
i) Insert bock end first.
Align the three holes in the back of the Vulcan with the three
prongs in the back of the computer.
ii) Snap down Into front tab.
Push down on the front of the Vulcan until the plastic tab on the
computer case snaps into the hole at the bottom front of the
Vulcan. You should hear the tab snap into place.
Snap Vulcan Into Front Tab
6) Plug Internal Power Cord Into Motherboard.
The Vulcan’s internal power cord plugs into the motherboard in
the same place as the old power supply’s cord. The connector’s
tab should be toward the right side of the computer.
•Note: Do not force the connector; it will plug in easily
in one direction.
Plug Internal Cord Into Motherboard
Ch.I - IIGS Instollation 3
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Applied Engineering Computerhardware Handbücher
Applied Engineering
Applied Engineering Vulcan IIGS Bedienungsanleitung
Applied Engineering
Applied Engineering EY5QGRAMKEEPER Bedienungsanleitung
Applied Engineering
Applied Engineering GS-RAM III Bedienungsanleitung
Applied Engineering
Applied Engineering AUDIO ANIMATOR Bedienungsanleitung
Applied Engineering
Applied Engineering Transwarp Bedienungsanleitung
Applied Engineering
Applied Engineering RamWorks 2 MEG Plus Bedienungsanleitung
Applied Engineering
Applied Engineering Sonic Blaster Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
