Apricorn Aegis Secure Key Bedienungsanleitung
1 2
3
5 6
7
9 0
8
4
Apricorn Aegis Secure Key
Quick Start Guide
Thank you for purchasing the Apricorn Aegis Secure Key. The Aegis
Secure Key works by simply entering your desired 7-15 digit PIN directly onto
the onboard keypad. The Aegis Secure Key can then be connected to any
USB port on any computer running any operating system. Should the drive
be lost or stolen, the user can rest assured that all data held on the Aegis
Secure Key is safe and cannot be accessed by any unauthorized third party
The full manual is located on the Aegis Secure Key, we recommend that you
unlock the Key and download the manual first before making any changes.
The manual can also be found at http://www.apricorn.com/, then select
Aegis Secure key.
Introduction
Unlocking the Key
Changing your PIN code
1. Press the Key button
2. Within 10 seconds enter the User PIN
(Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press the Key button will blink for a correct PIN entry
will blink for an incorrect PIN entry
4. Connect the Aegis Secure Key to a
USB port within 30 seconds will be on
will blink together
will be on or blink for activity
5. To lock the Aegis Secure Key, Unplug
it form the USB port.
1. Press the Key button
2. Within 10 seconds enter the User PIN
(Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press and hold the Key button
for 3 seconds
4. Enter a new PIN number
(The number must be 7 - 15 digits)
5.
to store the new PIN
6. Re-enter the new PIN number
7. Press the Key button
to confirm the new PIN
will blink together
Press the Key button
will be on
will blink together
will blink if the new PIN is accepted
The Key is unlocked & ready to use
Will blink alternately if the new
PIN was not accepted
Even though the Aegis Secure Key can be used straight out of the box with the
default PIN 1-1-2-2-3-3-4-4, for security reasons, we highly recommend that a
new User PIN is configured immediately by following instructions below.
Quick Start Guide (continued)
Resetting you Aegis Secure Key
In case the User PIN have been forgotten, or if you would like to delete all data stored
on the drive and configure a new User PIN, follow the instructions below. The reset
process will clear all PINs and encryption keys and destroy all data. This means a new
User PIN will have to be defined in order to re-enable the drive. Also, since this will force
the creation of a new encryption key, the drive will have to be reformatted.
Note: By resetting the Aegis Secure Key, all data previously
stored on the drive will be lost!
1. Press the Key button 2 times
within 2 seconds
2. Press and hold the Key button and 0 button
for 3 seconds
3. Enter 9 - 9 - 9
4. Press the Key button
5. Press the Key button
LED’s will tun off
will blink together
will blink
will be on
will be on solid
Your Key and PIN are erased
0
999
Note: When the is on and solid a new user PIN will need to be set prior to use.
Setup new PIN after resetting Aegis Secure Key
Technical Support
Once the drive is reset either by the method above or if the drive was locked by a brute
force attack (10 unsuccessful attempts to unlock the Aegis Secure Key). A new user PIN
will need to be defined.
will blink together
will blink together
1. Press the Key button for 3 seconds
2. Within 10 seconds enter the new PIN
3. Press the Key button to save
will be on
will be on
4. Re-enter the new PIN number
5. Press the Key button to confirm the
New PIN
Note: Must be between 7-15 digits in length. Must not contain repeating numbers e.g. 3-3-3-3-3-3-3
Must not contain sequential numbers e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4-5-6), (7-6-5-4-3-2-1)
Apricorn, Inc 2011.
All rights reserved
12191 Kirkham Rd
Poway, CA, U.S.A 92064
will blink if the new PIN is accepted
The Key is unlocked & ready to use
Will blink alternately if the new
PIN was not accepted
Andere Handbücher für Aegis Secure Key
3
Inhaltsverzeichnis
Andere Apricorn Sicherheitssystem Handbücher
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung