Aqara H1 EU Bedienungsanleitung
Smart Wall Switch H1 EU (With Neutral)
User Manual
·01
Smarter Lichtschalter H1 EU (mit Neutralleiter)
Gebrauchsanleitung
·12
Interruptor Inteligente de Pared H1 EU
(Con Neutro) Manual de Usuario
·23
Interruttore da muro intelligente HE EU
(Con neutro) Guida Utente
·46
·57
·67
Умный настенный выключатель H1 EU (с нейтралью) Руководство пользователяInterrupteur Mural Intelligent H1 EU
(Avec Neutre) Manuel d'instructions
·34
智能牆壁開關H1 EU（零火線版）使用說明書
Product Profile
Based on the Zigbee 3.0 wireless communication protocol, the
Aqara Smart Wall Switch H1 EU (With Neutral) is a smart switch
that turns on and off the power of lights and other connected
devices. Aer binding with an Aqara hub, it can implement
remote control via the Aqara Home app, timed control, power
detection, power statistics and other functions, and can work
with other smart devices in smart home automations.
01
* This product requires a compatible Zigbee 3.0 hub. Some features require a
specific hub. For a detailed list, please visit: www.aqara.com/support
Indicator Light
WS-EUK03
Push Button
Short Press Once: Turn on/off
Long Press for 5s: Reset the device/Enable
network connection
Quick Press 3 Times: Effective Range Test
Warnings
1.
2.
3.
4.
5.
This product is not a toy. Please keep children away from this
product.
This product is designed for indoor use only.
Do not use in humid environments or outdoors.
Beware of moisture. Do not spill water or other liquids onto the
product.
Do not place this product near a heat source. Do not place it in
an enclosure unless there is normal ventilation. Do not attempt
to repair this product by yourself. All repairs should be
performed by an authorized professional.
02
WS-EUK04
Push Button
Indicator Light
Short Press Once: Turn on/off
Long Press for 5s: Reset the device/Enable
network connection
Quick Press 3 Times: Effective Range Test
Installation Method (The picture shows the Double Rocker
version as an example)
6. This product is suitable for improving the quality of your home
life and reminding you about the device status. If a user violates
the product use instructions, the manufacturer will not be liable
for any risks and property losses.
1. Open the switch panel with a flat-blade screwdriver.
Please make sure that the power at circuit breaker or fuse
box is turned off before wiring!
03
2. Loosen the terminal screw on the back of the switch with the
screwdriver, connect the live wire to the hole L, the neutral wire
to the hole N, and the load (light) wire to the hole L1 and L2
(corresponding to the le and right buttons respectively), and
tighten the terminal screws aer confirming that the wiring is
correct.
3. Mount the switch to the wall junction box with the attached
screws and mount the switch plate.
04
only the Double Rocker
Version has hole L2
L1LN L2
4. Turn on main power at the circuit breaker, and test the switch
by pressing the button. If the light can be controlled normally,
the switch is working properly!
05 321
Effective Range Test: Quick press the button on the device 3
times. If the Hub makes voice prompts, it indicates that the device
can communicate effectively with the Hub.
Quick Setup
1.
2.
Please add the hub to the Aqara Home app according to the
Hub Quick Start Guide.
Please open the Aqara Home app, and then tap “+” in the top
right corner to enter “Add Device (Accessory)” page. Tap the
code-scanning icon on the upper right corner, and scan the QR
code on the package box, user manual or the back of the
switch, or find and select “Smart Wall Switch H1 EU (With
Neutral, Single Rocker/Double Rocker)”, and add it according to
instructions.
06
* If the connection fails, please move the hub closer to the switch, connect to
power and try again.
Indicator Light Description
07
Indicator Light Status
Blue light flashes once Device is powered on
Blue light flashes quickly Zigbee network is connecting
Blue light is steady on
Description
Zigbee network works
properly and the switch is
turned on
Overload and high temperature
alarm
Red light flashes quickly
Zigbee network is not connectedRed light flashes slowly
The switch panel does not
match the in-wall power
supply module
Red light is steady on
Andere Handbücher für H1 EU
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Aqara Schalten Handbücher
Aqara
Aqara G2H Bedienungsanleitung
Aqara
Aqara M1S Bedienungsanleitung
Aqara
Aqara Magic Switch S1E Bedienungsanleitung
Aqara
Aqara H1 Bedienungsanleitung
Aqara
Aqara H1 Bedienungsanleitung
Aqara
Aqara H1 EU Bedienungsanleitung
Aqara
Aqara SSM-U02 Bedienungsanleitung
Aqara
Aqara ZHWG11LM Bedienungsanleitung
Aqara
Aqara G2H Bedienungsanleitung
Aqara
Aqara T1 Bedienungsanleitung
