Aquatic AQ-DVD-3 Bedienungsanleitung
AM/FM World Tuner
XM Mini Tuner Ready
DVD/CDMP3/WMA/Divx/JPEG/
iPod Ready
AQ-DVD-3
AQ-DVD-3B
Page 2 of 32
Introduction
AQ-DVD-3 is a Multi-Media Player for
applications which supports both traditional analog Tuner systems and advanced Digital Radio such
as the XM Mini Tuner. It supports playback of most of the popular audio formats including: MP3,
WMA as well as traditional CD discs. It has a Car Spec DVD loader and supports playback
of DVD audio/video and the most advanced Divx vido format. The iPod ready function is able to
fully control and display iPod song information on the unit.
multi-environment (Spa, Marine, Outdoor Kitchen, Bathroom)
Page 3 of 32
1. Major Features
DVD
Supports decoding of MPEG 1 AND MPEG 2, MPEG 4 advance sample profile
Supports Divx 3.11/4.x/ 5.x
Supports DVD +/-R/ DVD +/-RW/Audio CD/CDR/CDRW
ESP-Electronic Anti-Shock protection
Last Position Memory
MP3/WMA
Supports playback of MP3/WMA format
File Play / Pause / Repeat / Random
ESP-Electronic Anti-shock protection
Last Position Memory play
CD-DA
CD-R/CD-RW Compatible
CD Track Play / Pause / Repeat / Random
ESP-Electronic Anti-shock protection
Last Position Memory play
Support Memory Card
SD/MMC Card Interface
SAT Radio section
Supports XM Passport (XM Mini Tuner)
Category / Channel / Song / Artist display in one line full dot matrix display
Channel up / down
Fast Channel up / down
Category Navigate searching
18 channel preset memory
One-Touch channel store
iPod Ready
Full function direct control iPod on main unit
Display Song / Album / Artist information on unit
Last position Memory play
Support all iPod family, including iPod Video (does not support iPod Shuffle)
Recharge iPod Battery when ACC is on
Tuner section
AM/FM PLL electronics tuning World Band Tuner
User selectable USA / Latin USA / Europe / Orit tuner area vis software
Page 4 of 32
Audio section
50 Watts x 4 Mosfet Power IC (TDA7560).
Dual Zone Front/Rear Audio/Video output selection
Electronic audio control (Bass/Middle/Treble/Fader/Balance)
Programmable center frequency for Bass/Middle/Treble & Loudness.
Selectable X-Bass frequency boost Low/Mid/High
Subwoofer level control 0-12
Selectable subwoofer low-pass filter (80/120/160HZ)
Rear speaker on/off selection
Internal amplifier on/off selection
Multi-zone entertainment system
User selectable front & Rear different output Audio/Vedio Sources
Main System section
Zero current draw in ACC off mode (Memory back up system)
Low Volt (10.5) Beep Alert system
Adjustable LCD display contrast level
TWO levels (lighting: Low/30% & High/100%) of LCD backlight dimmer control.
Any button power on
Control Front Panel Section
Tact Switch Buttons
Silicon Rubber Key Pad with light illumined
White back light buttons
White LCD positive TN LCD display
One line full dot matrix 67x 7 dots display
IR sensor on Panel
Power Button Priority Red
Chassis
Flip Down with Fixed non-removable Panel
1 DIN & ISO-Din Sleeve Mounting
External control
RF remote control ready(option)
Flush LCD Commander ready(option)
IR credit card remote ready
External connection
2 X video (RCA) output
1 set X A/V (RCA) input
2nd set A/V input (option)
2-pairs front/rear 4V pre-AMP audio RCA output
Page 5 of 32
Subwoofer (RCA) output
External Remote/RF connection port (Mini 8 din)
Mini USB for XM Mini Tuner
iPod Ready Port (Mini 8 din)
2.3 Meter iPod Extension cable (option)
External Connection wires
12V Power out wire X 2
5V Power out
Remote Amplifier On/off wire
Molex 12 Pin Harness for Power and Speaker wires
Special Workmanship
Silicon rubber illuminate panel buttons
Front Panel Waterproof(IPX67)
Main Chassis Stainless steel
Conformal coated( thick) circuit board
Dielectric Gel on Panel Board
The waterproof Gel on the scews
3M Tape on the mental gap
Centrex 814 plastic on panel.
UV protection on paint or plastic(500hours of UV protection)
Stainless Steel Mounting Screws #316
Page 6 of 32
2. Features Description
2.1 Main System Section
POWER ON/OFF
Press the POWER button < 3 seconds or any button on the front panel to turn on the unit. Press the
POWER button momentarily to turn off the unit.
If a disc is being inserted when the Power is Off but ACC on, the unit will automatically power up
and the playback will start.
If a CD is present, the playback will resume at the last position memory before ACC off or Power
off.
If no CD is present, the unit will resume at the last mode selected (Tuner, Aux, etc.).
Power button is illuminated whenever the IGN lead (red wire) is powered regardless if the unit is
on or off.
MODE SELECTION
Press Mode button repeatedly to select between TUNER >DVD >XM > iPod >AUX In.
RESET
Reset System to clear memory if the unit shows an error
AS/PS
When in SAT Mode, press AS/PS button to scroll/display the currently selected satellite radio label
information.
Quick Exit Hot key
In the following modes and conditions short pressing “AS/PS” button (< 3 seconds) allows you to
quickly exit the current operation without waiting for the system to default time out;
1) Under System Menu operation
2) Under Searching mode
3) Under Audio Menu operation
DC +12V Power Out:
This unit has two buttons named 12V_1 and 12V_2. These will be used to transmit switching signals
to the receiver which will have 2 trigger wire outputs capable of driving 12VDC/300mA for operating
relays. The 2 triggers will be activated On/Off via the following:
Trigger 1(12V_1): Press and hold MENU button (>3sec)
Trigger 2(12V_2): Press and hold TOP button (>3sec)
TOP DC +5V Out
This unit can activate four 5v jets On/Off via the following:
Whenever you want to activate the jets, you need to press "TOP" button first, then there will be
20 secs to press the 4 jet control buttons (numeric buttons from 1 to 4), then the unit will send
out 5V pulse momentarily to turn on/off the 4 jets respectively. If the 20 secs have passed, you
need to press "TOP" again to get another 20secs.
Page 7 of 32
2.2 System MENU
Function List
When you press the MENU button for < 3 seconds, the following list of items are inside the MENU:
Contrast – Display
Low Batt – 10.5V Low Battery Alert On/off
Dimmer – High/Low
Distant / Local – Tuner Seek mode
Area – Tuner Freq. Step spacing
Rear Speaker – On/Off
INTERAMP – On/Off
Vol PGM - Programmable turn on volume
Beep Tone – On/Off
Steps to access Menu items:
1) To access the MENU press the Menu button < 3 seconds.
2) “MENU” will be displayed for 2 seconds, and then “CONTRAST” will appear on the display.
3) To navigate through the MENU use the >>| or |<< buttons to navigate thru the menu items, or
Press the MENU BUTTON repeatedly to view the menu items.
4) To adjust the selected menu item, press the VOLUME +/-
5) After the selected menu item(s) has been changed and no other buttons have pressed within the
5 second time-out, unit will resume to the previous operation.
Description of Menu Items:
CONTRAST – “CONTRAST 5” will be displayed by default. The user now has 5 seconds to press the
VOLUME +/- from 0 – 10.
LOW BATTERY ALARM –“LOW BATT Off” is the default setting. User now has 5 seconds to use the
VOLUME +/- to adjust from “Off” to “On”. The low battery detection will monitor the voltage on the
ACC line. The threshold voltage shall be 10.5 +/- 0.3 VDC. A true low voltage state shall be
determined by the sampling of the ACC line over time, where it is reading consistently at the 10.5 +/-
0.3 VDC.
If selected LOW BATT “On”- The alarm shall be a beep tone heard over the speaker outputs at a
burst of 8 seconds every 30 seconds. The visual warning "LOW BATT" message will be flashing
for 8 seconds every 30 seconds on the LCD.
Page 8 of 32
If selected LOW BATT “Off”- User won’t be alerted and no “LOW BATT” message will be displayed
when in low voltage state.
DIMMER –The dimmer feature of the display is set to "DIMMER High" by default. User can use the
Volume Up or Down button to adjust the Dimmer level between High or Low
DISTANT / LOCAL – “Distant” is the default setting. User now has 5 seconds to adjust the VOLUME
+/- from “Distant” to “Local”.
User can use the Volume Up or Down button to select between Local or Distance mode. This
feature is used to designate the strength of the signals at which the radio will stop during
automatic tuning. "Distance" is the default setting, allowing the radio to stop at a broader range
of signals. To set the unit to select only strong local stations during automatic tuning, use the
volume control button until "Local" appears in the display.
AREA – “USA” is the default setting. User now has 5 seconds to select “USA to “LATIN” to
“EUROPE” or “ORIT” by pressing the VOLUME +/-
Rear Speaker On/Off – Rear speaker is turned’ ON’ by default. If OFF is selected, the rear
speaker's audio output will be TURNED OFF. This function user doesn’t need Rear Speakers sounds
output through rear speakers. Select “ON” to reactivate the rear speakers sound output
INTERAMP On/Off – “On” will be displayed by default. The user has 5 seconds to press the
VOLUME +/- from “On” to “Off”
PROGRAMMABLE TURN-ON VOLUME – “VOL PGM 12” is the default setting. User now has 5
seconds use the VOLUME +/- to program the turn on volume.
BEEP TONE – “ON” is the default setting. User now has 5 seconds to adjust by pressing the
VOLUME +/- from “ON” to “Off”. (see attached documents for LCD Numeric)
Page 9 of 32
3. Audio Section
VOLUME CONTROL
Adjust the volume of all sources. Also adjust the BASS, MIDDLE TREBLE, BALANCE and FADER
functions when accessed. Volume control 0 – 46 range - At approximately “43”, all sources AM/FM,
DVD and AUX should be at clipping.
MUTE
Press MUTE button < 3 seconds to activate MUTE on & off. Mutes all sources –60dB
SUBWOOFER
User has 5 seconds to use the volume up or down button to adjust the Sub-woofer level from '00' to
'12'.
The Sub-woofer level control is only applicable if the unit is equipped with the optional sub-
woofer line out, and only if the unit is connected to an optional sub-woofer speaker.
The Sub-woofer level control option will only appear in the Audio Menu if the “Sub-woofer”
function is activated “ON” by pressing the “Sub-w” button on control panel.
iX-BASS (Ix-Bass Level)
Press iX-BASS Button < 3 seconds to activate the True Loudness on & off. User has 5 seconds to use
the Volume up or down button to select the 3 different Bass Boost level: Low, Mid, or High.
BASS (Bass Level)
User has 5 seconds to use the Volume Up or Down button to adjust the desired Bass level range from
-6 to +6.
BASS –CFQ (Bass Center Frequency)
User has 5 seconds to use the Volume Up or Down button to adjust the desired Bass Center
Frequency to 60Hz, 80Hz, 100Hz, or 200Hz.
BASS-Q (Bass Quality Factor)
User has 5 seconds to use the Volume Up or Down button to adjust the desired Bass Quality Factor
to 2N, 1N, 1W or 2W
MIDDLE (Middle Level)
User has 5 seconds to use the Volume Up or Down button to adjust the desired Middle level range
from -6 to +6.
MIDDLE (Middle Center Frequency)
User has 5 seconds to use the Volume Up or Down button to adjust the desired Middle Range Center
Frequency to 500Hz, 1KHz, 1.5KHz, or 2.5KHz
MIDDLE-Q (Middle Quality Factor)
Page 10 of 32
To Access Below Functions, Press Audio/Enter Button on Front of Unit
Andere Handbücher für AQ-DVD-3
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Aquatic Medienplayer Handbücher
Aquatic
Aquatic AQ-MP-5UBT-H Fehlerbehebungshandbuch
Aquatic
Aquatic AQ-BC-5UBT Handbuch
Aquatic
Aquatic BLUECUBE6 BC6 MINI Leitfaden
Aquatic
Aquatic HS Sport Plus Kit Leitfaden
Aquatic
Aquatic AQ-MP-5UBT-S Leitfaden
Aquatic
Aquatic BLUECUBE AQ-BC-5BT Bedienungsanleitung
Aquatic
Aquatic AQ-BC-6BT Leitfaden
Aquatic
Aquatic AQ-MP-5BT-H Bedienungsanleitung
Aquatic
Aquatic BLUECUBE+ AQ-BC-6UBT-X Leitfaden
Aquatic
Aquatic 6500-915 Bedienungsanleitung
