Aquatic MP6 Leitfaden
USER / INSTALLATION MANUAL
MP600
MP6 Basic DIN Series Stereo
WATERPROOF STEREO
! PLEASE READ THIS INSTALLATION GUIDE BEFORE
INSTALLATION AND OPERATION !
If you have any questions, visit support.aquaticav.com
or your nearest authorized dealer.
CHARGING
RADIO
AM/FM
RADIO
AM/FM
288W
POWER
TRIGGER
12V
TRIGGERS
12V
DSP EQ
DSP EQ
1Getting Started...................................................................
1.1 Contents............................................................................
1.2 Connections......................................................................
1.3 Connections Diagram......................................................
1.4 Power On..........................................................................
1.5 Installation........................................................................
1.5.1 Mounting Hole...........................................................
1.5.2 Installation.................................................................
2Controlling the Stereo.......................................................
2.1 Location of Controls.........................................................
2.2 Control Functions.............................................................
3Listening via Bluetooth......................................................
3.1 Listening via Bluetooth....................................................
3.2 Pair with Bluetooth Audio Device....................................
3.3 Listening via Bluetooth Audio Device.............................
3.4 Bluetooth Multi-Link.........................................................
4Listening via USB..............................................................
4.1 Listening via USB.............................................................
4.2 Direct Search by Folder/File............................................
4.3 Direct Search by Track Number.......................................
4.4 Random Playback............................................................
4.5 Repeat Playback..............................................................
4.6 Device Charging...............................................................
5Listening to DAB+ Digital Radio.........................................
5.1 What is DAB+ Digital Radio?............................................
5.2 Listening to DAB+ Digital Radio......................................
5.3 Manually Save DAB+ Stations to Memory......................
5.4 Automatically Save DAB+ Stations to Memory..............
5.5 Listening to Saved Radio Memory...................................
6Listening to AM/FM Radio.................................................
6.1 Listening to AM/FM Radio...............................................
6.2 Manually Save AM/FM Radio Stations to Memory.........
6.3 Automatically Save AM/FM Radio Stations to Memory.
6.4 Listening to Saved Radio Memory...................................
3
3
3
4
5
6
6
6
8
8
9
10
10
10
10
10
10
11
11
11
11
11
11
11
12
12
12
12
12
12
13
13
13
13
7Audio & Settings Menus...................................................
7.1 Audio Menu......................................................................
7.1.1 Beep Tone................................................................
7.1.2 EQ..............................................................................
7.1.3 Loudness...................................................................
7.2 Setting Menu...................................................................
7.2.1 Dimmer High/Low.....................................................
7.2.2 Priority Display (Info/Clock).....................................
7.2.3 Power On Volume.....................................................
7.2.4 Area US/Euro............................................................
7.2.5 Local On/Off.............................................................
7.2.6 Stereo/Mono.............................................................
7.2.7 Clock Settings...........................................................
7.2.8 Bluetooth Off/Link....................................................
7.2.9 Restore......................................................................
8Additional Features...........................................................
8.1 Listening to Auxiliary Devices.........................................
8.2 External 12V Triggers......................................................
9Specications & Dimensions............................................
9.1 Specications..................................................................
9.2 Dimensions......................................................................
10 Warranty Information.....................................................
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
16
16
16
17
17
17
18
Contents
MP600: MP6 Basic DIN Series Stereo
Table of Contents
www.aquaticav.com
2
• MP600 Waterproof Stereo
• Silicon Faceplate
• User/Installation Manual
• Mounting Chassis and Hardware
• Four (4) Stainless Steel Mounting Screws*
• Mounting Template*
1.1 Contents
1. 12-pin Watertight Harness*
The 12-pin harness supplies power and ground connections to the stereo and
four (4) speaker channel output connections from the stereo.
Do not cut or modify the 12-pin harness on the stereo side or warranty will be void.
2. AM/FM Radio Antenna Jack
Allows connection of AM/FM radio antenna. For best AM/FM performance
make sure the antenna is extended to the highest achievable position.
3. Auxiliary Outputs
Allows external amplifiers to be connected to power additional speakers.
4. Auxiliary Inputs
Allows an additional RCA input, from a standalone unit or another stereo
source.
5. 12V DC External Trigger (x2)
Allows for external lighting or relays to be triggered (3A max load).
6. USB Input
Play USB thumb drives with supported audio media and charge devices when
connected.
7. DAB Input Cable
Allows connection of the AQ-DAB+ Digital Radio Receiver (sold separately).
1.2 Connections (see Connections Diagram 1.3)
*Retail packaged models only.
!
MP600: MP6 Basic DIN Series Stereo
Getting Started
www.aquaticav.com
3
1
4
7
10
2
A- A
5
8
11
3
6
9
12
A
A
FUSE
1.3 Connections Diagram
All open wire connections should be soldered and protected against water and dust for best long-
term performance.
No lower than a 2 Ohm speaker load should be used or damage may occur to the stereo. Make
sure the polarity of speakers is connected correctly.
*Retail packaged models only.
AM/FM Radio Antenna Jack
12-pin Watertight Harness*
Pin No. Wire Color Description
1 Green LR Speaker (+)
2 Green/Black LR Speaker (-)
3 Red Acc (+12V)
4 White LF Speaker (+)
5 White/Black LF Speaker (-)
6 Yellow Battery (+12V)
7 Gray RF Speaker (+)
8 Gray/Black RF Speaker (-)
9 Blue Power AMP Remote
10 Violet RR Speaker (+)
11 Violet/Black RR Speaker (-)
12 Black Ground
12V DC External Trigger 1 (Brown)
12V DC External Trigger 2 (Brown)
RCA Auxiliary Inputs (Black)
RCA Auxiliary Outputs (Gray)
USB Input (Black)
DAB Input (Black)
Wired Remote Connector (Black)
12-pin Watertight Harness*
Fuse
Right Channel (Red)
Left Channel (White)
Right Channel (Red)
Left Channel (White)
1
2
4
3
5
6
7
!
!
The Wired Remote Control feature is not currently supported
on the MP600. Please do not use this connector.
!
MP600: MP6 Basic DIN Series Stereo
Getting Started
www.aquaticav.com
4
In a spa application the red and yellow wires should be jumped together and
then connected to the +12VDC output of the power source. In this set up the
MP600 will always be on, with a very low current draw when idle.
In a boat, ATV or other application requiring power from a battery, the yellow
wire (constant power) should be connected to the battery, and the red wire
should be connected to the ignition or a switch.
Once all connections are made press the rotary knob and the stereo will turn
ON. Press and hold rotary knob for 2 seconds to turn the unit OFF.
1.4 Power On
MP600: MP6 Basic DIN Series Stereo
Getting Started
www.aquaticav.com
5
PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND
OPERATION.
Aquatic AV recommends installtion of this stereo by a professional
technician.
A mounting template is included (retail packaged models only). Aquatic AV
recommends using the ‘measure twice, cut once’ method!
1. Check clearances on both sides of a planned installation area before drilling
any holes.
2. Cut the mounting hole using the method detailed below.
3. When routing RCA cables, keep them away from power cables and output
speaker wires.
4. Once complete make sure the outside surface is clean and clear of debris.
The MP600 stereo has an external water/dust proof gasket which requires a
clean and at surface for best performance.
1.5 Installation
*Retail packaged models only.
1.5.1 Mounting Hole
1. Using a jigsaw cut a rectangluar hole with dimensions 183mm (W) x 53mm
(H).
1. Slide the mounting sleeve into mounting hole.
2. Remove mounting sleeve handles by bending the backing bracket handles
until they break off as shown below.
1.5.2 Installation
183mm
53mm
Not to scale!
Please use
the mounting
template
provided*
!
MP600: MP6 Basic DIN Series Stereo
Getting Started
www.aquaticav.com
6
Make sure to connect other wires before power connection.
3. Remove the front trim covers from the MP600 stereo to reveal the four (4)
front locking screws.
4. Slide the MP600 stereo into the mounting sleeve and through the mounting
hole and secure the stereo using the front locking screws and a screwdriver.
During nal mounting, apply equal pressure to all points for the best water/
dust outer seal performance. Make sure screws are snug and do not over
tighten.
5. Review all outside surfaces of the MP600 stereo to ensure a proper
water/dust seal. This is important for long-term environmental protection
performance.
6. After installation is complete snap the trim covers back rmly in to place to
cover the screw holes.
7. After installation in complete snap the trim covers back rmly in to place to
cover the screw holes.
1.5.2 Installation cont.
Dashboard
Mounting Hole
(183 x 53mm)
Mounting Sleeve
Locking
Screws
MP600
Trim Cover
!
MP600: MP6 Basic DIN Series Stereo
Getting Started
www.aquaticav.com
7
1. Audio/Menu
2. ESC/Preset
3. Fast Rewind
4. Mode button
5. Rotary Selector
6. Fast Forward
7. Preset 1 / Repeat Playback
8. Preset 2 / Random Playback
9. LCD Display
10. 12V Triggers
11. Play/Pause
12. Preset 3
2.1 Location of Controls
1 2 3 4 5 6
12
10 11
7 8 9
MP600: MP6 Basic DIN Series Stereo
Controlling the Stereo
www.aquaticav.com
8
2.2 Control Functions
If your music player is connected via the Auxiliary input you will not be able to control track or
receive track information.
Button Action AM/FM USB BLUETOOTH DAB AUX
Audio/Menu Short Press Audio Menu: Bass - Treble - Balance - Fader - Beep - EQ - Loud
Long Press Settings Menu: Dim H/L - PRI Info/Clk - P-Vol - Area US/Euro - Loc On/Off - Stereo/Mono -
Clock Set - BT Off/Link - Restore
ESC/Preset Short Press 1) In MENU: EXIT
2) In FM: CH1-> CH2-
> CH3->
CH4-> CH5->
CH6-> CH1…
1) In MENU: EXIT
2) In USB: Direct
Search / Number
Search
1) In MENU: EXIT
2) In BT: No Function
1) In MENU: EXIT
2) In DAB: CH1->
CH2-> CH3->
CH4-> CH5->
CH6-> CH1…
1) In MENU: EXIT
2) In AUX: No
Function
Long Press Auto Store No Function No Function DAB Scan No Function
Fast Rewind Short Press Seek Down Previous Track Previous Track Previous Station No Function
Long Press Manual Tune Fast Rewind No Function No Function No Function
Fast Forward Short Press Seek Up Next Track Next Track Next Station No Function
Long Press Manual Tune Fast Forward No Function No Function No Function
Play/Pause Short Press Mute Play/Pause Play/Pause Mute Mute
Long Press Manual Tune No Function No Function Manual Store No Function
Mode/Disp Short Press Changes Source
Long Press Display Clock/Info
1/RPT Short Press Preset Ch.1 Read Repeat One /
Repeat All
No Function Preset Ch.1 Read Display Software
Version
Long Press Preset Ch.1 Save DIR / Folder Down No Function Preset Ch.1 Save No Function
2/RDM Short Press Preset Ch.2 Read Random No Function Preset Ch.2 Read No Function
Long Press Preset Ch.2 Save DIR / Folder Up No Function Preset Ch.2 Save No Function
3 Short Press Preset Ch.3 Read No Function No Function Preset Ch.3 Read No Function
Long Press Preset Ch.3 Save No Function No Function Preset Ch.3 Save No Function
Rotary Selector Rotate Volume Up/Down and Navigate Menus
Power/Band
(Push Rotary
Selector)
Short Press Power On / Band
Change / Enter
Enter when in Menu Power On Band Change / Enter Power On
Long Press Power Off
12V Triggers Short Press 12V DC Trigger 1 Output On/Off
Long Press 12V DC Trigger 2 Output On/Off
Navigating past the last Settings Menu item (Restore) will automatically exit the Settings Menu
and enter the Audio Menu. Press and hold Audio/Menu button to enter the Settings Menu again.
MP600: MP6 Basic DIN Series Stereo
Controlling the Stereo
www.aquaticav.com
9
1. Enable Bluetooth Audio mode by pressing MODE and selecting Bluetooth.
2. Switch on your Bluetooth Audio device.
3. Select ‘MP6’ from the list of available devices to pair. No password should
be required however if prompted for a password use ‘0000’.
4. A Bluetooth logo will illuminate on the stereo’s LCD to verify Bluetooth is
connected.
3.2 Pair with Bluetooth Audio Device
3.1 Listening via Bluetooth
The Bluetooth Audio menu is accessible by pressing the Audio/Menu button
and is used to connect a Bluetooth Audio device or disconnect a Bluetooth
Audio device that has already been paired.
3.3 Listening via Bluetooth Audio Device
1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is
paired in any mode. Use MODE to change to Bluetooth Audio mode to listen to
music from your device.
2. Play the song from device and the sound will play through the stereo.
3. Press PLAY/PAUSE to play/pause the song.
4. Press FAST REWIND/FORWARD buttons to play previous/next song le.
5. Previous/next track and volume up/down can also be controlled directly
from your Bluetooth Audio device.
3.4 Bluetooth Multi-link
A second Bluetooth Audio device can pair to the stereo even when music is
playing from the rst Bluetooth Audio device.
Once paired, playing music from device 2 will override device 1 and the stereo
will begin playing music from device 2.
Should you wish to play music from device 1 again, wait 10 seconds and
press play on device 1. This process can be repeated between device 1 and
device 2 indenitely while both devices are paired.
MP600: MP6 Basic DIN Series Stereo
Listening via Bluetooth
www.aquaticav.com
10
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Aquatic Stereoanlage Handbücher
