AQUATONE Blast Bedienungsanleitung
USER MANUAL –EN
TK-200, TK-201 Inflatable kayak Aquatone Blast 12'0" /
13'6"
2
CONTENTS
IMPORTANT INFORMATION................................................................................................................. 3
IDENTIFIACTION CARD......................................................................................................................... 3
PARTS LIST............................................................................................................................................ 4
SAFETY INSTRUCTIONS....................................................................................................................... 5
BEFORE INFLATION.............................................................................................................................. 5
PUMP USE.............................................................................................................................................. 6
DECK INFLATION................................................................................................................................... 6
INFLATION OF THE SIDES.................................................................................................................... 7
SEAT ATTACHMENT.......................................................................................................................... 7
FINS ATTACHEMENT ............................................................................................................................ 8
PADDLE ASSEMBLY.............................................................................................................................. 8
KAYAK DEFLATION ............................................................................................................................... 9
FOLD AND PACK.................................................................................................................................... 9
CARE, MAINTENANCE AND STORAGE............................................................................................. 10
REPAIRS............................................................................................................................................... 10
LEAK AROUND THE VALVE ............................................................................................................ 10
VALVE LEAK THROUGH THE MIDDLE PART ................................................................................ 11
ENVIRONMENT PROTECTION ........................................................................................................... 11
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................. 12
3
Thank you for purchasing the product. Our kayaks are made to the highest safety requirements. We
believe that you will be satisfied with the purchased product. Read the manual before use to use the
product as efficiently as possible. We wish you many years of enjoyment and good experience with
our kayaks.
IMPORTANT INFORMATION
Model
Date of Purchase:
Dealer name:
Province/State:
Country:
Item No:
HIN no:
IDENTIFIACTION CARD
4
PARTS LIST
A
Handles
B
Water splash guard
C
Saddle attachment
D
Velcro paddle holders
E
Velcro deck saddle holder
F
High pressure deck surface
G
High pressure valves, max. Side pressure 3 Psi / 0.2 Bar, max. Deck pressure 5 Psi / 0.33 Bar
H
6-point cargo bungee cord system
I
Bailing valves
J
4-piece aluminum paddle PULSE
K
Double-acting hand pump
L
165L backpack
M
Saddle with backrest (TC-KS300 x 2, TC-KS300 x 3)
N
Fins 2x
O
Repair set
5
SAFETY INSTRUCTIONS
Sports can be dangerous and physically demanding. There is a risk of serious injury or death from
drowning. The user of this product acknowledges, understands, and takes responsibility of the risk
involved in sports. Observe the following safety standards and safe operating practices whenever
using this product.
When using an Aquatone board, you are personally responsible to determine if you have the required
skill level to handle the different water and wind conditions. You should use your best judgement as to
when and where to use your board. All users of an Aquatone board agree to assume all
responsibilities for any damage or injury, including death, which may result from using or handling a
SUP.
•Check weather conditions and water levels before heading out.
•Always wear an approved personal floatation device (PFD) before you start paddling, read the
manufacturer’s documentation about your PFD and familiarize yourself with how to properly
wear it. (Always wear safety leash).
•Do not go into water if you are under the influence of alcohol, drugs, or medication as it may
affect your condition, judgement, or ability to safely and securely operate your SUP.
•Be aware of your limitation and do not exceed you paddling ability.
•Dress accordingly for weather conditions and if necessary, wear a wetsuit.
•Always familiarize yourself with local waters and hazard environments before use.
•Never let kids or teenagers use the kayak without adult supervision.
•Never tow the SUP.
•Never use SUP as personal transport floatation device.
•Never exceed SUP´s maximum weight limit.
•Always check all equipment for signs of wear or damage before use.
•Always carry identification card.
•It is recommended to be accompanied with multiple persons in case of an emergency or
accident.
•Always inform others about using the kayak, location, destination, and number of people.
Always inform yourself and other about medical conditions.
•Always follow coast guard regulations, local laws and regulations.
BEFORE INFLATION
Thanks to the design of the kayak, the high-pressure valve can be released during transport.
Therefore, it is important to check that the valve is fully tightened before use. The valve should be
inspected regularly to ensure that it remains tight. This will prevent small pressure losses and ensure
optimal performance of your kayak .
If pressure escapes from the inflated kayak around the valve, it is likely that the valve is not tightened
properly. The valve must be tightened correctly to stop the pressure leak.
Note: The valve can only be properly tightened if the kayak is deflated.
6
Pin up
Air in
Pin down
Air out
PUMP USE
Attach the hose to the pump and kayak.
Aquatone pump is equipped with two inflation modes:
•Double action mode: initial inflation of the kayak, air flows into the kayak during pumping
when moving up and down - the air valve is closed
•Single action mode: the final inflation of the kayak
The pump is also equipped with a pressure gauge. The maximum pressure for the sides is 3 Psi / 0.2
Bar, for the deck 5 Psi / 0.33 Bar.
DECK INFLATION
Inflate the kayak deck. Then put the deck in a kayak. Max. pressure is 5 Psi / 0.33 Bar for deck. Insert
the deck into the kayak so that the Velcro strap for securing the seats is at the top.
7
INFLATION OF THE SIDES
After inserting the deck, inflate the sides to a maximum of 3 Psi / 0.2 Bar.
SEAT ATTACHMENT
Attach the seats to the deck. Align the Velcro strap seats with the Velcro straps on the kayak deck.
Then secure the seats with nylon straps to the sides of the kayak. Adjust the distance between the
saddles according to your preference. The number of seats depends on the model
8
FINS ATTACHEMENT
Turn the kayak to the side. Slide the lock plate from left to right. The tip of the fin must point towards
the end of the kayak. Make sure that the fin is properly secured, you should hear a click when the lock
plate is inserted.
PADDLE ASSEMBLY
Make sure you have all 4 parts of the paddle. The
paddles are connected with the middle part.
First join the blade with the poles and then join
the two paddles. All connections are connected
using pins.
9
KAYAK DEFLATION
Before deflation, clean the valve of dirt.
Slowly press the pin, the initial air burst out then
the air flow slows down. Once the airflow has
slowed down, you can push the pin all the way in
and turn it counterclockwise to the OPEN
position.
To deflate the kayak, connect the hose to the
pump in the DEF and pump out the air.
FOLD AND PACK
Remove all other accessories. Deflate all air through the assembly. Assemble the kayak according to
the pictures below.
10
CARE, MAINTENANCE AND STORAGE
•Open the drain valves in the middle and on the back of the kayak. Tilt the kayak so that there
is no excess water in it.
•Clean the kayak, clean the bottom and seats with water or soap and water after each use so
that it is not damaged by sand, sun, and salt water. Do not use aggressive cleaning agents.
•Dry the inside and outside of the kayak thoroughly with a sponge or cloth / towel.
•Check the condition of the kayak before and after each use.
•Do not pull the kayak on the ground, you may damage the surface of the kayak.
•Store the kayak in a cool, clean, and dry place.
•Do not store the kayak in extreme conditions (above 50 ° C and below 0 ° C)
REPAIRS
LEAK AROUND THE VALVE
Deflate the kayak completely.
Firmly grasp the inside of the valve through the bottom of the wall.
Insert the supplied wrench into the valve.
Use a wrench to tighten the valve clockwise.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Beliebte Boot Handbücher anderer Marken
Raymarine
Raymarine ST70 Instrument Bedienungsanleitung
Pro-Line Boats
Pro-Line Boats Pro Line 19 Sport Bedienungsanleitung
Jeanneau
Jeanneau CAP CAMARAT 8.5 CC Bedienungsanleitung
Tiara Yachts
Tiara Yachts C49 2024 Bedienungsanleitung
Monterey Boats
Monterey Boats Sport Yacht 330 Bedienungsanleitung
J
J 105 Bedienungsanleitung
PURSUIT
PURSUIT OS 335 Bedienungsanleitung
Boston Whaler
Boston Whaler CONQUEST 345 Bedienungsanleitung
Jeanneau
Jeanneau SUN ODYSSEY 41 DS Bedienungsanleitung
Meridian
Meridian 490 Pilothouse Bedienungsanleitung
Advanced Elements
Advanced Elements AdvancedFrame Expedition AE1009 Bedienungsanleitung
Robo Marine Indonesia
Robo Marine Indonesia GEOMAR Bedienungsanleitung
