Arbiter Systems 1205D Bedienungsanleitung

MODEL 1205D SETUP GUIDE

Unpacking

Carefully check the packing material for these accessories: GNSS antenna, standard antenna cable

assembly, and one DIN rail clip with mounting screws. Handle the GNSS antenna carefully, as it may

be damaged if dropped.

Installing GNSS Antenna

The GNSS antenna included with the clock is designed to be threaded onto a 3/4 inch diameter pipe (not

included). The optional Antenna Mounting Kit (part number: AS0044600) includes a 3/4 inch diameter pipe

nipple and makes installation easier. The antenna works best with a clear view of the sky in all directions.

GNSS Antenna

3/4 inch Pipe (not included)

Operate LED Antenna Cable

Figure 1: Antenna Mounting Example

1. Pass the antenna cable through the pipe and attach the cable to the antenna. Tighten by hand,

spinning the cable connector. DO NOT spin the antenna onto the cable or DAMAGE may occur.

2. Thread the 3/4 inch diameter pipe (not included) into the base of the antenna and snug by hand.

3. Mount the pipe to a ﬁxture, such as our Antenna Mounting Kit.

4. Install GNSS Surge Protector or In-Line Preampliﬁer if needed. Reference their own instructions.

5. Connect the antenna cable to the clock.

Connecting Power Cables

• VERIFY that the voltage level is in the correct range.

• VERIFY that the polarity is as speciﬁed on the label.

• Strip the insulation 1/4 inch and DO NOT tin.

• A fuse is located to the left of each installed power inlet connector.

Connecting Signal Cables

Strip the insulation 1/4 inch and DO NOT tin.

Installing DIN Rail Clip

The Model 1205D may be mounted with a DIN rail clip that can be attached to one of three sides.

Arbiter Systems, Inc. ·1324 Vendels Circle, Suite 121 ·Paso Robles, CA 93446 ·USA ·Tel: +1.805.237.3831

Fax: +1.805.238.5717 ·E-mail: techsupport@arbiter.com ·Internet: http://www.arbiter.com PD0054500C 1

MODEL 1205D SETUP GUIDE

PORT 1

PORT 2

100 – 350 Vdc

85 – 264 Vac / 47 – 440 Hz

100VA MAX.

3.15 AT

400 Vdc

500 Vac

GND L2

DC–

DC+

1205D GNSS SYNCHRONIZED CLOCK

ANTENNA

STATUS

RS–485

PROGRAMMABLE PULSE

341 2 5 6

IRIG

OPEN

DRAIN

ANALOG

EVENT

RS–232

PORT 1

RS–232

PORT 2

RELAY

GNSS

FAULT

OPERATE NORMAL LEARN

UNLOCKED ALARM

0 – 5 Vdc

PORT 3

Figure 2: 1205D Connections Figure 3: 1205D DIN Rail Mounting Clip

Figure 4: Input/Output Connector showing Locking Retention Hardware

Conﬁguring with Web Interface

1. Connect one of the ports to the network or computer.

• NET 1 is set to the static address 192.168.0.232

• NET 2 and NET 3 are set for DHCP. Find assigned IP address:

–Press SYSTEM until view NETWORK STATUS?

–Press ENTER

–Press UP or DOWN to review the IP and MAC address of each port.

2. Use a web browser (Firefox or Chrome work best). Use the IP address of the port

(http://192.168.0.232). The UI will provide a login screen for entering the username and password.

3. The default username is admin and the default password is password.

Additional Help

The operation manual is available as a free download from www.arbiter.com or to purchase.

Arbiter Systems, Inc. ·1324 Vendels Circle, Suite 121 ·Paso Robles, CA 93446 ·USA ·Tel: +1.805.237.3831

2 Fax: +1.805.238.5717 ·E-mail: techsupport@arbiter.com ·Internet: http://www.arbiter.com

Inhaltsverzeichnis

Andere Arbiter Systems Uhr Handbücher

Arbiter Systems

Arbiter Systems 1084A Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1200B Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1095A Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1205B Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1088A Bedienungsanleitung

Arbiter Systems

Arbiter Systems 120A Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1095A Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1205B Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1200B Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1201B Installationshandbuch

Arbiter Systems

Arbiter Systems 1094B Installationshandbuch

Arbiter Systems

Arbiter Systems 1092A Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1205B Bedienungsanleitung

Arbiter Systems

Arbiter Systems 1084A Installationshandbuch

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung