Arbor Technology Gladius 5 Bedienungsanleitung

2014.08

Gladius 5

5.5” Rugged IoT Handheld

Device with Quad-core Processor

User's Manual

Version 1.0

- II -

- i -

Revision History

Version Release Time Description

1.0 2014.08 Initial release

- ii -

This document contains proprietary information protected by copyright. No

part of this manual may be reproduced by any mechanical, electronic, or other

means in any form without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in

order to improve the reliability, design and function. It does not represent a

commitment on the part of the manufacturer.

Under no circumstances will the manufacturer be liable for any direct, indirect,

special, incidental, or consequential damages arising from the use or inability

to use the product or documentation, even if advised of the possibility of such

damages.

About This Manual

This user’s manual provides the general information and installation instructions

for the product. The manual is meant for the experienced users and integrators

with hardware knowledge of personal computers. If you are not sure about any

description in this manual, consult your vendor before further handling.

We recommend that you keep one copy of this manual for the quick reference

for any necessary maintenance in the future. Thank you for choosing Arobor

products.

- iii -

Contents

Preface...........................................................................................................v

Declaration of Conformity.....................................................................................v

CE ................................................................................................................v

FCC Class B ................................................................................................v

RoHS...........................................................................................................vi

SVHC / REACH...........................................................................................vi

Safety Symbols .................................................................................................. vii

Important Safety Instructions ............................................................................. vii

Rechargeable Battery Pack Safety .....................................................................ix

General Cleaning Tips..........................................................................................x

Cleaning Tools.............................................................................................xi

Recommended Cleaning Procedures ........................................................ xii

Disposing of the Equipment ............................................................................... xii

Additional Information & Technical Support ...................................................... xiii

Warranty............................................................................................................ xiii

Chapter 1 Introduction................................................................................1

1.1 Product Highlights..........................................................................................2

1.2 Package Contents..........................................................................................2

1.3 Parts of the Device.........................................................................................4

1.4 Dimensions ....................................................................................................5

1.5 Specications.................................................................................................6

Chapter 2 Getting Started...........................................................................9

2.1 Accessing Battery Chamber.........................................................................10

2.2 Installing microSD and SIM Card.................................................................12

2.3 Charging the Battery ....................................................................................13

2.3.1 Charging the Battery .........................................................................13

2.3.2 Wireless Charging.............................................................................13

2.3.3 Checking the Battery Level ...............................................................14

2.4 Installing/Replacing the Battery....................................................................14

2.5 Optimizing Battery Life.................................................................................15

Chapter 3 Using the Rugged Handheld Deivce ......................................17

3.1 Using Touch Screen.....................................................................................18

3.1.1 Basic Operations...............................................................................18

3.1.2 Text Input...........................................................................................18

- iv -

Contents

3.2 Home Screen ...............................................................................................19

3.2.1 Extending Home Screen ...................................................................20

3.3 Using Cellular Network.................................................................................22

3.3.1 Making/Receiving Calls.....................................................................22

3.3.2 Data Connection ...............................................................................22

3.3.3 Data Roaming ...................................................................................23

3.3.4 Limiting Mobile Data Connection to 2G.............................................24

3.4 Using the Wi-Fi Feature ...............................................................................25

3.4.1 Enabling Wi-Fi and Connecting to a WLAN ......................................25

3.4.2 Adding a Wi-Fi Network.....................................................................26

3.4.3 Connecting to a Wi-Fi Network by WPS ..........................................27

3.4.4 Forgetting/Modifying a Wi-Fi Network...............................................28

3.5 Using the Bluetooth Feature ........................................................................29

3.5.1 Enabling Bluetooth and Pairing with Bluetooth Device .....................29

3.5.2 Conguring Bluetooth Features to Use.............................................31

3.5.3 Disconnect from a Bluetooth Device.................................................32

3.5.4 Making Your Bluetooth Device Discoverable ....................................32

3.5.5 Additional Bluetooth Settings ............................................................33

3.6 Using the Camera ........................................................................................34

3.7 Using the NFC Feature ................................................................................35

3.7.1 Enabling/Disabling NFC....................................................................35

3.7.2 Conguring NFC Modes....................................................................36

3.7.3 Exchanging Data with NFC-Enabled Device.....................................37

3.8 Using the Barcode Scanner .........................................................................38

3.8.1 Installing APK File .............................................................................38

3.8.2 Scanning the Barcode.......................................................................39

3.8.3 Supported Barcode Formats.............................................................40

Appendix A Accessories...........................................................................41

A.1 Using the D-Dock (Optional).......................................................................42

A.1.1 Parts of the D-Dock ..........................................................................42

A.1.2 Charging the Device .........................................................................43

A.2 Using the V-Dock (Optional) ........................................................................45

A.2.1 Parts of the V-Dock...........................................................................45

A.2.2 Charging the Device .........................................................................45

- v -

Preface

Declaration of Conformity

The CE symbol on your product indicates that it is in compliance with the

directives of the Union European (EU). A Certicate of Compliance is available

by contacting Technical Support.

This product has passed the CE test for environmental specications when

shielded cables are used for external wiring. We recommend the use of

shielded cables. This kind of cable is available from Arbor. Please contact your

local supplier for ordering information.

FCC Class B

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modications not expressly approved by the guarantee of this

device could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

Preface

- vi -

Preface

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

RoHS

Arbor Technology Corp. certies that all components in its products are in

compliance and conform to the European Union’s Restriction of Use of

Hazardous Substances in Electrical and Electronic Equipment (RoHS)

Directive 2002/95/EC.

The above mentioned directive was published on 2/13/2003. The main purpose

of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent

chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl

ethers (PBDE) in electrical and electronic products. Member states of the EU

are to enforce by 7/1/2006.

Arbor Technology Corp. hereby states that the listed products do not contain

unintentional additions of lead, mercury, hex chrome, PBB or PBDB that

exceed a maximum concentration value of 0.1% by weight or for cadmium

exceed 0.01% by weight, per homogenous material. Homogenous material

is dened as a substance or mixture of substances with uniform composition

(such as solders, resins, plating, etc.). Lead-free solder is used for all

terminations (Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).

SVHC / REACH

To minimize the environmental impact and take more responsibility to the earth

we live, Arbor hereby conrms all products comply with the restriction of SVHC

(Substances of Very High Concern) in (EC) 1907/2006 (REACH --Registration,

Evaluation, Authorization, and Restriction of Chemicals) regulated by the

European Union.

All substances listed in SVHC < 0.1 % by weight (1000 ppm)

- vii -

Preface

Safety Symbols

This symbol of “CAUTION” indicates that there is a danger of injury to

the user or a risk of damage to the product, should warning notices be

disregarded.

Battery Recycle

This symbol indicates electrical warning.

LASER RADIATION

This symbol indicates that a potential hazard to personal safety exists from

a laser source. When this symbol is displayed in this manual, pay special

attention to the specic safety information associated with the symbol

Important Safety Instructions

Read these safety instructions carefully:

1. Read all cautions and warnings on the equipment.

2. Place this equipment on a reliable surface when installing. Dropping it or

letting it fall may cause damage

3. Make sure the correct voltage is connected to the equipment.

4. For pluggable equipment, the socket outlet should be near the equipment

and should be easily accessible.

5. Keep this equipment away from humidity.

6. Disconnect this equipment from the A/C outlet before cleaning it. Use a

moist cloth. Do not use liquid or sprayed detergent for cleaning.

7. To fully disengage the power to the unit, please disconnect the power from

the AC outlet.

8. Do not scratch or rub the screen with a hard object.

9. Never use any of the solvents, such as Thinner Spray-type cleaner, Wax,

Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display. Harsh

chemicals may cause damage to the cabinet and the touch sensor.

- viii -

Preface

10. Remove dirt with a lightly moistened cloth and a mild solvent detergent.

Then wipe the cabinet with a soft dry cloth.

11. The openings on the enclosure are for air convection and protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

12. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

13. If the equipment will not be used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

14. Never pour any liquid into openings. This may cause re or electrical

shock.

15. Never open the equipment. For safety reasons, the equipment should be

opened only by qualied service personnel.

16. If one of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user’s manual.

e. The equipment has been dropped or damaged.

f. The equipment has obvious signs of breakage.

17. The sound pressure level at the operator’s position, according to IEC 704-

1:1982, is no more than 70dB(A).

18. Keep this User’s Manual for later reference.

19. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW

-55° C (-67° F) OR ABOVE 75° C (167° F). THIS MAY DAMAGE THE

EQUIPMENT.

Andere Handbücher für Gladius 5

Inhaltsverzeichnis

Andere Arbor Technology Handheld Handbücher

Arbor Technology

Arbor Technology GT-500 Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung

Palm

Palm Tungsten E2 Handbuch

Alien

Alien ALR-H460 Bedienungsanleitung

ViewSonic

ViewSonic Pocket PC V36 Bedienungsanleitung