Arbor Technology EPC-20X0-2610UE Bedienungsanleitung

EPC-20x0-2610UE

Fanless Embedded Computer with

Intel®i7-i2610UE Platform

User’s Manual

Version 1.0

P/N: 4012200002100P 2015.03

This page is intentionally left blank.

- I -

Index

Contents

Important Safety Instructions................................................ VI

About This User’s Manual .................................................... VII

Warning .................................................................................. VII

Replacing the Lithium Battery.............................................. VII

Technical Support ................................................................. VII

Warranty ................................................................................ VIII

Ordering Information............................................................ VIII

Chapter 1 - General Information..............................................1

1.1 Introduction................................................................2

1.2 Packing List................................................................3

1.3 The Installation Paths of CD Driver..........................5

1.4 Specications ............................................................6

1.5 Power Information .....................................................7

1.6 Dimensions ................................................................8

1.7 Locating Controls and Connectors........................10

1.8 Connecting Peripherals ..........................................12

Chapter 2 - The Engine of EPC-20x0-2610UE ......................19

2.1 Board Layout............................................................20

2.2 Jumpers and Connectors .......................................24

Chapter 3 - Installation and Maintenance.............................35

3.1 How to Install HDD, CFast, PCI/PCIe Card ............36

3.2 Wall Mounting ..........................................................43

3.3 Din-rail Mounting .....................................................44

3.4 Wiring the DC-Input Power Source........................46

Chapter 4 - BIOS.....................................................................47

4.1. Main...........................................................................49

4.2. Advanced..................................................................50

4.3. Chipset......................................................................64

4.4. Boot...........................................................................71

4.5. Security.....................................................................72

4.6. Save & Exit ...............................................................73

- II -

Index

4.7 Beep Sound codes list ............................................74

4.8 AMI BIOS Checkpoints............................................76

Appendix .................................................................................87

Appendix A: I/O Port Address Map ..............................88

Appendix B: Memory Mapping.....................................91

Appendix C: Watchdog Timer (WDT) Setting..............93

- III -

Revision History

Version Release Time Description

1.0 March, 2015 Initial release

- IV -

The information in this document is subject to change without prior notice in

order to improve the reliability, design and function. It does not represent a

commitment on the part of the manufacturer.

Under no circumstances will the manufacturer be liable for any direct, indirect,

special, incidental, or consequential damages arising from the use or inability

to use the product or documentation, even if advised of the possibility of such

damages.

This document contains proprietary information protected by copyright. All

rights are reserved. No part of this document may be reproduced by any

mechanical, electronic, or other means in any form without prior written

permission of the manufacturer.

Declaration of Conformity

The CE symbol on your product indicates that it is in compliance with the

directives of the Union European (EU). A Certicate of Compliance is available

by contacting Technical Support.

This product has passed the CE test for environmental specications when

shielded cables are used for external wiring. We recommend the use of

shielded cables. This kind of cable is available from ARBOR. Please contact

your local supplier for ordering information.

Warning

This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

FCC Class A

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference

that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

- V -

RoHS

ARBOR Technology Corp. certies that all components in its products are

in compliance and conform to the European Union’s Restriction of Use of

Hazardous Substances in Electrical and Electronic Equipment (RoHS)

Directive 2002/95/EC.

The above mentioned directive was published on 2/13/2003. The main

purpose of the directive is to prohibit the use of lead, mercury, cadmium,

hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated

diphenyl ethers (PBDE) in electrical and electronic products. Member states

of the EU are to enforce by 7/1/2006.

ARBOR Technology Corp. hereby states that the listed products do not

contain unintentional additions of lead, mercury, hex chrome, PBB or PBDB

that exceed a maximum concentration value of 0.1% by weight or for cadmium

exceed 0.01% by weight, per homogenous material. Homogenous material is

dened as a substance or mixture of substances with uniform composition

(such as solders, resins, plating, etc.). Lead-free solder is used for all

terminations (Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).

SVHC / REACH

To minimize the environmental impact and take more responsibility to the

earth we live, Arbor hereby conrms all products comply with the restriction

of SVHC (Substances of Very High Concern) in (EC) 1907/2006 (REACH

--Registration, Evaluation, Authorization, and Restriction of Chemicals)

regulated by the European Union.

All substances listed in SVHC < 0.1 % by weight (1000 ppm)

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

- VI -

Important Safety Instructions

Read these safety instructions carefully.

1. Read all cautions and warnings on the equipment.

2. Place this equipment on a reliable surface when installing. Dropping it

or letting it fall may cause damage

3. Make sure the correct voltage is connected to the equipment.

4. For pluggable equipment, the socket outlet should be near the

equipment and should be easily accessible.

5. Keep this equipment away from humidity.

6. Disconnect this equipment from the A/C outlet before cleaning it. Use a

moist cloth. Do not use liquid or sprayed detergent for cleaning.

7. The openings on the enclosure are for air convection and protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

9. If the equipment will not be used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

10. Never pour any liquid into opening. This may cause re or electrical

shock.

11. Never open the equipment. For safety reasons, the equipment should

be opened only by qualied service personnel.

12. If one of the following situations arises, get the equipment checked by

service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according

to the user's manual.

e. The equipment has been dropped or damaged.

f. The equipment has obvious signs of breakage.

13. The sound pressure level at the operator's position, according to IEC

704-1:1982, is no more than 70dB(A).

14. Keep this User’s Manual for later reference.

- VII -

About This User’s Manual

This User’s Manual is intended for experienced users and integrators with

hardware knowledge of personal computers. If you are not sure about any

description in this User’s Manual, please consult your vendor before further

handling.

Warning

The Box PC and its components contain very delicately Integrated Circuits

(IC). To protect the Box PC and its components against damage caused by

static electricity, you should always follow the precautions below when han-

dling it:

1. Disconnect your Box PC from the power source when you want to work

on the inside.

2. Use a grounded wrist strap when handling computer components.

3. Place components on a grounded antistatic pad or on the bag that

comes with the Box PC, whenever components are separated from the

system.

Replacing the Lithium Battery

Incorrect replacement of the lithium battery may lead to a risk of explosion.

The lithium battery must be replaced with an identical battery or a battery type

recommended by the manufacturer.

Do not throw lithium batteries into the trash can. It must be disposed of in

accordance with local regulations concerning special waste.

Technical Support

If you have technical difculties, please consult the user’s manual rst at:

ftp://ftp.arbor.com.tw/pub/manual

Please do not hesitate to call or e-mail our customer service when you still

cannot nd out the answer.

http://www.arbor.com.tw E-mail:info@arbor.com.tw

- VIII -

Warranty

This product is warranted to be in good working order for a period of one year

from the date of purchase. Should this product fail to be in good working order

at any time during this period, we will, at our option, replace or repair it at no

additional charge except as set forth in the following terms. This warranty does

not apply to products damaged by misuse, modications, accident or disaster.

Vendor assumes no liability for any damages, lost prots, lost savings or any

other incidental or consequential damage resulting from the use, misuse of,

or inability to use this product. Vendor will not be liable for any claim made by

any other related party.

Vendors disclaim all other warranties, either expressed or implied, including but

not limited to implied warranties of merchantability and tness for a particular

purpose, with respect to the hardware, the accompanying product’s manual(s)

and written materials, and any accompanying hardware. This limited warranty

gives you specic legal rights.

Return authorization must be obtained from the vendor before returned

merchandise will be accepted. Authorization can be obtained by calling or

faxing the vendor and requesting a Return Merchandise Authorization (RMA)

number. Returned goods should always be accompanied by a clear problem

description.

EPC-2020-2610UE EPC-2020-2610UE with 1 x PCIe slot & 1 x PCI slot

EPC-2030-2610UE EPC-2030-2610UE with 2 x PCIe slots & 1 x PCI slot

PAC-P065W 65W AC/DC adapter kit

80GB SSD Intel®2.5"80GB SATAIII SSD kit

WMK-2000 Wall mount kit for EPC-2000 series

DRK-2000 Din rail mounting kit for EPC-2000 series

MM-3C-2G DDR3-1600 2GB SDRAM

Ordering Information

Inhaltsverzeichnis

Andere Arbor Technology Industrie-PC Handbücher

Arbor Technology

Arbor Technology FPC-8100 Series Bedienungsanleitung

Arbor Technology

Arbor Technology LYNC-712-1900G4 Series Bedienungsanleitung

Arbor Technology

Arbor Technology ASLAN-W812C-2930G2 Bedienungsanleitung

Arbor Technology

Arbor Technology ARTS-3250W Bedienungsanleitung

Arbor Technology

Arbor Technology ASLAN-W715C Bedienungsanleitung

Arbor Technology

Arbor Technology ARES-1500-A10 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-9108 Series Bedienungsanleitung

Arbor Technology

Arbor Technology LYNC-712-4200G4 Series Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7600 Series Bedienungsanleitung

Arbor Technology

Arbor Technology IEC-3350 Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung