ARC Audio DXE Leitfaden

DXE

DIGITAL HYBRID EQ/CROSSOVER

FULLY BALANCED SIGNAL FROM

HEAD UNIT TO CONTROL UNIT.

GREEN DOT MATRIX DISPLAY

REMOTE CONTROLLER.

DUAL INPUT.

5 BAND PARAMETRIC EQ.

MICROPROCESSOR CONTROLLED.

12/24 DB HIGH PASS CROSSOVER.

3 STEREO PLUS SUMMED SUB

AND CENTER OUTPUTS.

12/24/48 DB SUB CROSSOVER.

MANUAL AND USER GUIDE

DXE

DIGITAL CROSSOVER EQUALIZER

DXE Manual

Table of Contents

Introduction

Welcome to the Arc Audio family of performance signal processors. A blend of Arc Audio’s

lengthy experience in performance car audio design combined with the legendary engineering

skills of Robert Zeff and the staff at Nikola Engineering. You are now the proud owner of the long

anticipated DXE, A unique combination of the highest quality analog EQ-crossover and precision

digital control we call Digital Hybrid. Whether you are a competitor or simply enjoy faithfully

reproduced music, you will definitely appreciate how the DXE makes your system sound.

This component isn’t the easiest to understand and use. It requires a good understanding of

audio and the terms and language used to describe it. You don’t have to be a genius but a bit of

experience and common sense will go a long way.

This manual is written in two partsInstallation and Configuration/Tuning. Before you begin find

and complete the “System Configuration Worksheet” (make a bunch of copies) included in this

manual. Carefully design your system and decide on your basic crossover points. This will give

you a good starting point and a reference to return to when you begin final tuning. If at any point

you begin to feel overwhelmed, return to your local Arc Audio dealer and let the trained

professionals install or tune it for you.

Introduction 1

Features 2

Installation Procedures 3

EQ Controls 4

Crossover Controls 6

Crossover Connections 7

ExampleSystem Active 2 way 8

Example SystemActive 3 way 9

Example SystemActive 4 way 10

Example SystemActive & Passive 4 way 11

High Pass Crossover Menus 12

X3 Crossover Menus 13

X2 Crossover Menus 14

Sub Crossover Menus 15

Recalling Presets 16

Changing the Welcome Screen 16

Menu Map 17

Specifications 18

Configuration and Tuning

High Pass Crossover

12dB/24dB pre octave.

16Hz – 7100Hz

12dB/24dB Per Octave Stereo

Crossover Frequency

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the HP:(High Pass) Frequency.

Turn the knob either direction to raise or lower the Frequency.

Crossover Slope Adjustments

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Range Menu.

Tap the Select button until you reach the HP Slope:

Turn the knob either direction to select 12dBor 24dB.

High Range Option

For Very High Frequency crossover points;

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Range Menu.

Tap the Select button until you reach the HP Range:

Turn the knob either direction to Select High (167Hz – 7100Hz) or Low (16Hz – 710Hz.

Gain Adjustments

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Gain Menu.

Tap the Select button until you reach the HP Level:

Turn the knob either direction to increase or decrease the Gain.

Source Assignment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Source Menu.

Tap the Select button until you reach the HP SRC:

Turn the knob either direction to set the High Pass as Front or Rear.

Crossover 3 (X3)

High Pass = 167Hz-7100Hz

Low Pass = 167Hz-7011Hz

Band Pass High=167Hz-7100Hz

Band Pass Low= 16Hz-710Hz

12dB per Octave

Crossover Mode

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Range Menu.

Tap the Select button until you reach the X3 Mode:

Turn the knob either direction to Select; HIGH,LOW,BAND or FULL

Crossover Frequency

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the X3 HP: (High Pass) or X3 LP:(Low

Pass)

Frequency.

Turn the knob either direction to raise or lower the Frequency.

Note: In High Pass or Low Pass the Band Pass frequency option will not be available for

adjustment.

Band Pass Mode Frequency Adjustment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the X3 Hi:

Turn the knob either direction to raise or lower the Frequency.

Note: This will adjust the point this crossover begins to filter out the High Frequencies.

Tap the Select button until you reach the X3 Low:

Turn the knob either direction to raise or lower the Frequency.

Note: This will adjust the point this crossover begins to filter out the Low Frequencies.

Gain Adjustments

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Gain Menu.

Tap the Select button until you reach the X3 Level:

Turn the knob either direction to increase or decrease the Gain.

Source Assignment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Source Menu.

Tap the Select button until you reach the X3 SRC:

Turn the knob either direction to set the High Pass as Front or Rear.

Crossover 2 (X2)

High Pass = 115Hz-4900Hz

Low Pass = 115Hz-4900Hz

Band Pass Low= 16Hz-710Hz

Band Pass High=115Hz-4900Hz

12dB per Octave

Crossover Mode;

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Range Menu.

Tap the Select button until you reach the

X2 Mode:

Turn the knob either direction to Select;

HIGH,LOW,BANDor FULL

Crossover Frequency

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the

X2 HP:

(High Pass) or

X2 LP:

(Low

Pass)

Frequency.

Turn the knob either direction to raise or lower the Frequency.

Note: In High Pass or Low Pass the Band Pass frequency option will not be available for

adjustment.

Band Pass Mode Frequency Adjustment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the

X2 Hi:

Turn the knob either direction to raise or lower the Frequency.

Note: This will adjust the point this crossover begins to filter out the High Frequencies.

Tap the Select button until you reach the

X2 Low:

Turn the knob either direction to raise or lower the Frequency.

Note: This will adjust the point this crossover begins to filter out the Low Frequencies.

Gain Adjustments

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Gain Menu.

Tap the Select button until you reach the

X2 Level:

Turn the knob either direction to increase or decrease the Gain.

Source Assignment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Source Menu.

Tap the Select button until you reach the

X2 SRC:

Turn the knob either direction to set the High Pass as

Front

Rear

The DXE Menus

Sub Crossover

12dB/24dB/48dB mono

4Hz – 152Hz

Crossover Frequency

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Frequency Menu.

Tap the Select button until you reach the Sub:

(Subwoofer) Frequency.

Turn the knob either direction to raise or lower the Frequency.

Crossover Slope Adjustments

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Range Menu.

Tap the Select button until you reach the Sub Slope:

Turn the knob either direction to select 12dB, 24dB, 48dB or Full.

Adjustable Phase

To reverse the Phase of the Sub Output;

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Range Menu.

Tap the Select button until you reach the Sub Phase:

Turn the knob either direction to Select 0or 180.

Gain Adjustments

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Gain Menu.

Tap the Select button until you reach the Sub Level:

Turn the knob either direction to increase or decrease the Gain.

Source Assignment

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until you get to the

Source Menu.

Tap the Select button until you reach the Sub:

Turn the knob either direction to set the Sub output as Front, Rear or

Front+ Rear.

Note: Front+ Rear is non-fading but you will notice a slight lose of

output as you fade. This is to compensate for the lose of output when the front or

rear speakers are turned down.

To Change the Presets,

The DXE has six memory presets. With six different system

configurations, almost anything is possible.

Hold the Select button for 2 seconds to advance to the next menu. Repeat this step until

you get to the Presets menu.

Turn the knob either direction to select the Preset you wish.

Tap the Select button to Recall the setting saved in this Preset.

Note: No need to save your settings before you e xit. They will be saved

automatically

Personal Options Menu

Hold down the select button while you turn the unit on.

Use the knob to select from the following options.

Splash Screen

Credits

VER.1.00

Factory Defaults

To Change the (Welcome) Splash Screen

Hold down the select button while you turn the unit on.

Use the knob to move between letters.

When you have the letter you wish to change highlighted

push the button to select it.

Turn the knob up or down to change the letter.

Push the knob to set the new letter in place

Use the knob to move to the next letter.

When you are finished push and hold the button for 2 seconds to return to

the Crossover menus.

Factory Default

In the event that the unit should stop responding to commands or b ecome

unstable you can reset the processor by using the Factory Defaults

command.

Software Version Information

This menu provides the Software version and date coding information.

This information may be necessary to receive service.

The DXE Menus

1: Freq Menu

1: Sub: 65.4 Hz

2: X2 HP 0115 Hz

3: X2 (HP)

4: X3 Hi: 3508 Hz

5: X3 Low: 0075 Hz

6: HP: 3508 Hz RH

2: Gain Menu

X2 Level: -04dB

X3 Level: -00dB

Ctr level: -90dB

Sub Level: +10dB

HP Level: -00dB

3: Range menu

X2 Mode: High

X3 Mode: Band

Sub Slope: 24dB

HP Slope: 24dB

Sub Phase: 0

HP Range: High

4: Source menu

X2 SRC: REAR

X3 SRC: FRONT

SUB FRONT+REAR

HP SRC: FRONT

5: Preset: 2

The Frequency Menu adjusts all the

crossover points that are available in

the current configuration.

In this example X2 is in high pass so

the Low frequency is not displayed.

All output gains are adjusted here.

The Sub Level has a +10db boost.

All the remaining output level range

from –90dB to –00dB.

In the Range Menu you select

crossover types and slopes. You can

also change the sub phase 0 or 180.

Select Front or Rear output. This

sets the fader control from the EQ.

Only the Sub channel has the

Front + Rear option.

To change to a new preset turn the

rotate the knob to bring up the preset

you wish to use then just tap the

button once.

When the menu changes the old

settings will be saved automatically.

Inhaltsverzeichnis

Andere ARC Audio Stereo-Equalizer Handbücher

ARC Audio

ARC Audio KEQ7 Bedienungsanleitung

Beliebte Stereo-Equalizer Handbücher anderer Marken

Pioneer

Pioneer DEQ-P90 Bedienungsanleitung

Roland

Roland E-660 Bedienungsanleitung

elysia

elysia mpressor Bedienungsanleitung

Free The Tone

Free The Tone PA-1QG Bedienungsanleitung

Kenwood

Kenwood KRC-999II Bedienungsanleitung

AudioBahn

AudioBahn AEX250X Bedienungsanleitung

Onkyo

Onkyo EQ-08 Bedienungsanleitung

Samson

Samson D3500 Bedienungsanleitung

TDM-Audio

TDM-Audio 30GE-2 Bedienungsanleitung

Me WM8 Bedienungsanleitung

Rob Papen

Rob Papen RP-EQ Bedienungsanleitung

Kenwood

Kenwood GE-4030 Bedienungsanleitung

Rane

Rane RE 27 Service-Handbuch

SPL

SPL SX2 Bedienungsanleitung

Rane

Rane MQ 302S Bedienungsanleitung

Aphex

Aphex 9901 Bedienungsanleitung

Klark Teknik

Klark Teknik DN370 Bedienungsanleitung

Behringer

Behringer Ultragraph Pro FBQ6200 Bedienungsanleitung