Argon audio 7460/50A Bedienungsanleitung

www.argonaudio.com 1

7460/50A

02 OWNER’S MANUAL

04 ILLUSTRATIONS

10 SPECIFICATIONS

10 TROUBLESHOOT

www.argonaudio.com 2

7460/50A

Owner’s manual

Dear Customer,

Quality has always been our driving force and founding

Argon Audio is a natural extension of this philosophy.

We have 20 years’ experience in creating and specifying

high quality products, manufacturing them and selling them

on to end users with Value-for-Money as the primary aim.

And Argon Audio is a brand fully compliant with these

values.

Design, features and quality standards are all specified in

Denmark and manufacturing takes place in the Far East,

where quality vendors are highly competitive - and as a

result supply outstanding Value-for-Money products

– to the delight of both ourselves and our customers!

Introduction

Thank you for choosing Argon Audio loudspeakers, we

hope they will bring you many years of enjoyment.

Please read this manual fully before unpacking and

installing the product. This manual covers both Argon

7450A and 7460A models

Unpacking

We have during production and packing carefully checked

and inspected these loudspeakers.

After unpacking please check for any damage from

transport.

We recommend that you keep the original carton box and

packing material for any future shipping.

Loudspeaker installation

The speakers are best used with the tweeters

approximately at ear level when seated.

Loudspeaker positioning

Variations in placement of your loudspeakers can produce

dramatic differences in the way music sounds. No listening

room is the same and therefore we encourage you to spend

some time experimenting with which placements work best

in your listening room. Trust your ears and be willing to

experiment freely, you can not ruin anything.

You can start with our basic recommendations.

Please try to ensure that the room’s surroundings of each

loudspeaker left and right are similar in acoustic character.

For example, if one loudspeaker is placed on bare walls

while the other is placed close to soft furniture’s and

curtains, both the overall sound quality and the stereo

image are likely to be compromised.

Because bookshelves are usually located close to the wall

placement on bookshelves will often provide a richer, more

full-bodied sound. In other words; you will get more Bass.

On the other hand, if you place the speakers free-standing

You will get less Bass but a clearer sound.

T o begin with, the speakers should be positioned between

1.5 m and 3 m apart at two corners of an equilateral

triangle, completed by the listening area at the third corner.

This is the optimal way of placement.

The Argon 7460A/7450A is designed to play single-

standing, if the room is not too big.

In bigger rooms (+30 sqm) a subwoofer will need to be

added in order to get optimal sound.

www.argonaudio.com 3

7460/50A

Running-in period

We recommend a running-in time of your new Argon

7460A/7450A loudspeakers of approximately 15-20 hours at

normal listening level before you decide on the final

positioning of the loudspeakers. During the running-in time

the drive units will settle in and perform as intended.

Connecting your loudspeakers

We recommend that you read the manual of your other

audio products carefully before connecting your

loudspeakers. Please switch off all equipment when

connecting your loudspeakers.

The speaker binding posts on the terminal accepts wire up

to Ø 4mm or cables with banana plugs.

Make sure that positive terminal binding posts on the

Passive speaker (marked + and colored red) are connected

to the positive output terminal binding posts on the Active

speaker and that the negative terminals on the Passive

speaker (marked – and colored black) are connected to the

negative output terminal on the Active speaker.

Now you can connect the audio source you want.

(read more about this on page 4 and forward).

Care and cleaning

We don’t recommend use of any solvents or cleaners on

Argon 7460A/7450A cabinets, the cabinet surface usually

only requires dusting or cleaning with a damp soft cloth

(only use cold clean water).

Avoid touching the drive units, especially the tweeter, as

damage may result.

Environmental information

Argon 7460A/7450A loudspeakers comply with international

directives on the Restriction of Hazardous Substances

(RoHS) in electrical and electronic equipment and the

disposal of Waste.

Electrical and Electronic Equipment (WEEE) - the crossed

bin symbol indicates compliance and that the products must

be appropriately recycled or processed in accordance with

these directives.

Safety instructions

Please store this instruction manual for future reference.

Do not use this product near water or moisture. Clean only

with a dry cloth. Unplug this product from the wall outlet

before cleaning. Place the unit on a solid surface. Do not

block any ventilation openings. Do not put it in a closed

bookcase or a cabinet that may keep air from flowing

through its ventilation openings. Do not install near any heat

sources, such as radiators, heat registers, stoves or other

appliances that produce heat. Protect the power cord from

being walked on or pinched, particularly at plugs and the

point where they exit from the product. Servicing is required

when the product has been damaged. Do not attempt to

service this product yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards.

Please contact the manufacturer to be referred to an

authorized service center near you. To prevent risk of fire or

electric shock, avoid over loading wall outlets, extension

cords, or integral convenience receptacles. Do not let

objects or liquids enter the product. Use proper power

sources. Plug the product into a proper power source, as

described in the operating instructions or as marked on the

product.

www.argonaudio.com 4

7460/50A

Bass Reflex ports

Volume control

Power ON LED,

lights blue when “ON”

Front panel

www.argonaudio.com 5

7460/50A

Input selector.

Corresponds the connections

on the back panel

3,5 Mini-Jack input for

connecting iPod, MP3 or PC

Input for CD player, DVD

player etc. using RCA plugs

TRS phone jack balanced input.

For easy professional audio use

Connection to (right)

Passive speaker

USB audio input from any

digital USB source (like a PC)

USB plug type B

Out put for active subwoofer

Fuse holder, if fuse needs to be

replaced only use same type and

value. IMPORTANT; remember

to unplug the power cable from

mains socket before opening

the fuse holder

Power On/Off switch

Main Power connection

Rear panel and connections

www.argonaudio.com 6

7460/50A

Connecting Your speakers

STEP 1

Connect the RED (+) and BLACK (-)

terminals from the left speaker to the

corresponding terminals on the right

speaker using at least decent speaker

cable, to enhance sound quality.

Insulation on cable must be stripped on

all ends.

Note: Because this Argon system is self-

powered, do not connect the speaker

terminals to the speaker outputs of a

stereo receiver.

STEP 2

Connect the power cord into the left

speaker and the other end into the wall

outlet.

www.argonaudio.com 7

7460/50A

Connect your Argon 7460A/7450A to a subwoofer

CONFIGURATION (connecting subwoofer using RCA plugs mono or stereo)

Connect the single RCA plug to your Argon 7460A/7450A.

Your subwoofer might have input for one RCA plug just like there is only one

RCA output plug from the 7460A/7450A. Connect using this single RCA plug

at both ends.

Your Subwoofer might have a Left and Right input. In this case you can

choose two options. Option 1 is to use the single RCA connection and you

can choose either L or R input and leave the other one unplugged.

Option 2 is to get a cable with one RCA plug at one end and two RCA (L and

R) at the other end for connecting to the Subwoofer.

To make things simple, we recommend you to use only one RCA at both

ends, even though your subwoofer might have both an

L and R input.

www.argonaudio.com 8

7460/50A

Use of digital audio connection (USB Audio)

7460A/7450A back panel cut out

USB AUDIO

Your Argon 7460A/7450A is equipped with a USB Audio

Digital input (shown marked no.1 on the above drawing)

A USB Audio Digital input means that you can connect a PC

and directly play digital audio content from the PC.

Conversion of the signal from digital to analogue would

normally happen in the PC, but often the D/A conversion

quality in PC’s are of poor standard.

7460A/7450A has a high quality build in D/A converter that

ensures you optimal sound quality when using USB digital

audio. Using USB Audio ensures you that the D/A

conversion happen in the speaker and not in the PC.

What can you connect to USB AUDIO input?

USB digital audio input is shown marked no.1 on the

drawing.

Your Argon 7460A/7450A is using a USB type B plug

(similar to what many Printers use)

USB AUIO is primarily intended for playback from a PC.

All PC’s have USB AUDIO out.

Connection will in most cases be a standard flat USB plug

in the PC end and a USB type B plug for the 7460A/7450A

Other audio source products might also have USB AUDIO

out. Refer to your audio source manual about this issue.

Notice that Apple iPod, iPhones etc, are not supported for

USB AUDIO on 7460A/7450A

If you want to know more about USB and USB AUDIO you

can check http://en.wikipedia.org/wiki/USB

www.argonaudio.com 9

7460/50A

Use of analogue audio connection

7460A/7450A back panel cut out

What not to do when connecting a Source input to your

Argon 7460A/7450A

Do not use a combined RCA and Mini-Jack (3,5mm) cable!

Often you will see a cable that has mini-jack at one end and

two RCA plugs at the other end. The cable will work but the

input sensitivity of mini-jack and RCA are quite different.

This will result in the Argon 7460A/7450A playing too low

volume. Use only cables with identical plug types at both

ends.

Connections explained

Analogue audio connections

Your Argon 7460A/7450A is equipped with 3 different

analogue audio input types. In this section we will explain

you how and when to use the different inputs. The 3

different connection types are show on the above drawing

as no. 1-3

Note that most new TV remotes can control the Argon

7460A/7450A active speaker volume if connected to

variable TV audio out.

*1 is standard left/right RCA to use typically with a DVD

player, CD player or normal Hi-Fi audio source component

*2 is mini-jack 3,5mm stereo input. Typically for use with

connecting a iPod, Mp3 Player, PC or TV

*3 is a not so used standard called ¼”TRS. It’s usage is

primarily for Professional Audio use as its makes it easy

and safe to plug and unplug the connectors often.

And, once again remember to use analogue audio connect

cables with same type plugs at both ends 

www.argonaudio.com 10

7460/50A

Specifications:

General 7460A/7450A

Type: 2Way Loader Speaker, 2 Drivers, reflex type cabinet

Inputs: Digital USB3.0 audio,1xmini-jack 3,5 mm stereo, L/R

RCA stereo input, L/R ¼”TRS phone plug

Output: SUB-OUT Sub output level 1.0V

Main voltage: 220-240V, 50/60Hz

Amplifier type: Dual Class AB

Distortion: @4ohm/1-50W <0.05%

Input sensitivity: 1000mV (RCA) 500mV (3.5mm mini-jack),

1000mV TRS

Specific 7460A

Tweeter: 1” Horn loaded design

Woofer: 6” High Power Kevlar Woofer Speaker

Frequency Response: (-3db): 25Hz-20KHz

Output Power: 2X65W (RMS 20-20.000 4ohm) 2X90W 1khz

Weight: 16kg

Specific 7450A

Tweeter: 1” Horn loaded design

Woofer: 5” High Power Kevlar Woofer Speaker

Frequency Response: (-3db): 30Hz-20KHz

Output Power: 2X50W (RMS 20-20.000 4ohm) 2X75W 1khz

Weight: 12kg

Basic Troubleshooting

If the LED does not light up, check...

that the AC power cord is firmly plugged into the rear panel

and wall outlet.

to make sure the speaker rear panel power switch is ON.

that the speaker is getting power from the wall outlet.

that the rear panel voltage selector is matched to the

operating voltage.

the fuse in the AC IN on the rear panel. If the fuse needs to

be replaced it is extremely important to replace only with

same fuse type and value.

If no sound output, check...

that the speaker is turned on (blue LED illuminated)

to make sure the right speaker is connected correctly to the

left.

that the volume on the speaker back panel is not all the

way down.

the volume level on the iPod or other audio source.

If bass output is low, check...

speaker wire polarity (verify that wires are going to same

terminals on both speakers)

that the speaker placement is not too close to a wall or

other obstruction.

that the bass ports on the rear panels are not blocked by a

rodent or jelly sandwich.

If no output from right speaker, check...

that the speaker wire is properly connected from the left to

right.

Check by removing the speaker wire from both terminals on

each speaker and reconnecting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere argon audio Sprecher Handbücher

argon audio

argon audio ALTO A4 Bedienungsanleitung

argon audio

argon audio A5 Bedienungsanleitung

argon audio

argon audio Tempo A4 Bedienungsanleitung

argon audio

argon audio SA1 Bedienungsanleitung

argon audio

argon audio 6350 Bedienungsanleitung

argon audio

argon audio FORTE A4 MK2 Bedienungsanleitung

argon audio

argon audio DAB3+ Bedienungsanleitung

argon audio

argon audio Radio 2i MK2 Bedienungsanleitung

argon audio

argon audio Radio 3i MK2 Bedienungsanleitung

argon audio

argon audio Forte A4 Bedienungsanleitung

argon audio

argon audio Tempo Active Bedienungsanleitung

argon audio

argon audio IE20 Bedienungsanleitung

argon audio

argon audio Radio 1 Bedienungsanleitung

argon audio

argon audio ALTO4 Bedienungsanleitung

argon audio

argon audio Sub8 Bedienungsanleitung

argon audio

argon audio FENRIS Bedienungsanleitung

argon audio

argon audio FORTE Bedienungsanleitung

argon audio

argon audio BASS 8 Bedienungsanleitung

argon audio

argon audio Octave 5A Bedienungsanleitung

argon audio

argon audio Radio 2i MK2 Bedienungsanleitung

argon audio

argon audio 7340 Bedienungsanleitung

argon audio

argon audio FORTE MKII Bedienungsanleitung

argon audio

argon audio 6344C Bedienungsanleitung

argon audio

argon audio 7340A Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung

Tannoy

Tannoy SYSTEM 600a Bedienungsanleitung

argon audio 7460/50A Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken