ARITCO HomeLift Bedienungsanleitung

Congratulations on

your new li.

Aritco HomeLi

User manuAl

paGe 2

INTRODUCTION................................................................... 4

Congratulations on your new lift.................................. 4

Intended use of the home lift......................................... 4

SAFETY..................................................................................... 5

Warning texts ........................................................................ 5

Safety features ...................................................................... 5

Sound pressure level.......................................................... 5

OPERATION INSTRUCTIONS.........................................7

Control panel.......................................................................... 8

EMERGENCY AND FAULT FINDING ........................10

Emergency lowering and opening .............................10

Power failure .........................................................................10

Simple fault finding............................................................10

Alarm button and emergency stop ............................ 11

CARE AND MAINTENANCE..........................................12

Cleaning................................................................................... 12

Service intervals...................................................................12

Disposing of the lift parts ...............................................12

Oil, drive screw lubrication.............................................12

Lift no longer in use...........................................................12

TOOLS......................................................................................13

LABELING ..............................................................................15

The information in this document is subject to

alteration without prior notice and should not

be regarded as an undertaking from Aritco Lift

AB. Aritco Lift AB is not responsible for damage

incurred due to misuse of this document.

The document or parts thereof, may not be repro-

duced or copied without prior permission. It may

not be imparted to a third party or otherwise be

used without authorisation. Infringement hereof

will be subject to action in accordance with appli-

cable laws.

paGe 3

index

IntrOduction

paGe 4

CONGRATULATIONS ON YOUR NEW LIFT

You have chosen a home lift from Aritco Lift

AB. A modern, user-friendly and safe product

that will give you years of service. We will do

everything in our power to justify the confi-

dence you have placed in us.

To make the best possible use of the home lift,

it is important that you read these instructions

carefully before using the lift.

INTENDED USE OF THE LIFT

Aritco HomeLift is intended for use by persons

in private homes in an indoor environment.

The lift shall only be used within the temper-

ature range +5°C to +40°C. Do not exceeded

the rated load specified on the control panel

and in the technical specification.

paGe 5

sAfety

WARNING TEXTS

Warning texts in this manual are used to point

out extra critical instructions. Warning texts are

marked as follows:

CAUTION

Describes a hazardous situation which, if not

avoided, can result in minor or moderate injury on

persons or equipment.

WARNING

Describes a very hazardous situation which, if not

avoided, will result in death or serious injury.

SAFETY FEATURES

Safety edges are placed along the edge of the

carrier floor and above the lift DesignWall. If a

safety edge is pressed the lift will stop as a pre-

ventive action. When the safety edge returns to

its normal position the lift can be used again.

The doors will lock automatically when the lift

leaves the floor.

The lift will automatically stop if the pressure on

the SmartControl is not maintained (i.e. you let go

of the SmartControl) or the lift has reached the

selected floor level.*

Emergency stop button on carrier control panel.

On-board alarm button which is connected to an

automatic telephone dialer.

CAUTION

Do not leave children unattended in the lift.

CAUTION

The lift is not designed for transporting heavy

goods, and do not bring long or bulky items

(eg ladders) into the lift.

WARNING

Do not interfere with the lift’s safety devices.

SOUND PRESSURE LEVEL

The sound pressure level generated by the lift is

expected to be less than 70 dB (A).

* “Hold to run” = The SmartControl has to be kept pushed

during the ride. For installations outside Europe the lift has

one touch operation.

operation

instruCtions

Press the call button located

next to the door. The lift will stop

automatically at the floor level

and the doors will open.

Enter the carrier and wait for

the door to close. The automatic

door opener will close the doors

after a time delay or once you

have chosen what floor to go to.

Constant pressure should be

applied to the SmartControl on

the control panel until the lift ar-

rives and stops automatically at

that floor level. For installations

outside Europe the lift has one

touch operation.

Once the lift reaches the chosen

floor level, the doors are un-

locked and opens allowing exit

from the carrier.

CAUTION

Do not lean against the shaft

walls or doors, and do not let

any object touch the shaft walls

when the lift moves.

paGe 6

paGe 7

DESIGNLIGHT

CARRIER/PLATFORM

DOORS

CONTROL

PANEL

with SmartControl

button

WALL

PANELS

solid or glass

CALL

BUTTON

paGe 8

contrOl panel

e control panel is placed in

the middle of the DesignWall,

and is used to control the li.

SMARTCONTROL

The SmartControl is a unique way of

controlling the lift that has been special-

ly developed to be more user-friendly

and ergonomic than standard lift but-

tons. It comprises a stainless steel ring,

which is turned to select a floor. The

plastic top part is pressed to start the

lift.

Turn counterclockwise to

select a lower floor, i.e. to

go down.

Turn clockwise to select a

higher floor, i.e. to go up.

CONTROL PANEL SYMBOLS

FLOOR INDICATOR

The floors are indicated on the control panel with

the numbers 1, 2, 3, 4, 5 and 6. The numbers are

backlit using a white light, which tells you which

floor you are currently on and which floor you have

chosen to go to. The current floor is indicated with

100 % brightness, while the other floors are indicat-

ed with 50 % brightness.

KEY – FOR LOCKING THE CONTROL PANEL

It is possible to lock the control panel to prevent

the lift from being used. A key symbol indicates

whether or not the lift is locked. The lift can still

be called from another floor when locked and is lit

until the lock is turned off.

Locking the lift: Turn the SmartControl

counterclockwise until the key symbol is shown.

Then press and hold the SmartControl for five

seconds. A second key symbol will then light up

(red light) next to the max. weight symbol. This

symbol indicates that the lift is locked.

To unlock the lift: Turn the SmartControl counter-

clockwise until the key symbol is shown. Press and

hold the SmartControl for five seconds. The red

key symbol will turn off, indicating that the lift is no

longer locked.

RATED LOAD, MAXIMUM NUMBER OF PERSONS

AND OVERLOAD

The control panel features symbols indicating the

rated load and maximum number of persons that

the lift is designed for. When the lift is loaded with

a heavier load than it is rated for, the rated load

symbol will flash red. It is not possible to use the lift

when it is overloaded.

paGe 9

ALARM BUTTON AND EMERGENCY CALLS

In accordance with EN81-41, two-way communication is man-

datory for safety reasons. All Aritco HomeLifts are therefore

equipped with an autodialer that can be used to make emer-

gency calls.

The alarm button is connected to the autodialer. When the

alarm button is pressed for 10 seconds, the autodialer au-

tomatically calls the first telephone number in the list of

pre-programmed numbers. The numbers are programmed

when the lift is installed. If the first call is not answered after

a pre-defined time, the autodialer will automatically call the

next number in the list.

The autodialer is connected to the fixed PSTN line as stand-

ard. It can be supplied with a GSM module as an option. The

SIM card is not supplied by Aritco.

EMERGENCY STOP BUTTON

The emergency stop button is designed for use in emergen-

cy situations. When the button is pressed, the lift stops. The

button is reset by twisting it.

SERVICE SYMBOL – INDICATES THAT THE LIFT

REQUIRES SERVICING

The service symbol is normally not lit. When a

service is required, the symbol lights up (yellow

light). It is possible for the service partner to set the

intervals for when a service is needed.

STATUS SYMBOL – INDICATES THE STATUS OF

THE LIFT

The status symbol indicates the status of the lift.

When the symbol is not lit, this indicates that the

lift is working normally. When lit, the symbol indi-

cates a fault with the lift. A yellow light indicates

a minor fault, while a red light indicates a serious

fault that must be reset by service personnel.

FIRE SYMBOL – INDICATES A FIRE

The lift can be connected to the building’s fire

alarm system.

If there is no fire, the fire symbol remains off. In

the event of a fire, the fire symbol turns red. In the

event of a fire, the lift will automatically travel to

the floor pre-defined by the homeowner.

A backlit arrow indicates that the emergen-

cy stop function is activated. The white light

will blink until the button is reset.

Yellow light indicates that the alarm button has

been pressed for more than 10 seconds.

Green light indicates connection.

EMERGENCY LOWERING AND OPENING

If the lift needs to be emergency lowered and/

or the doors needs to be emergency opened,

contact a competent person. Instructions can

be found on a label on the outside of the lift.

The key for emergency opening shall be stored

in a safe place outside the lift.

POWER FAILURE

In case of power failure, the lift will automati-

cally go to back-up battery operation and the

lift will travel to the nearest lower level when

you push the SmartControl. When the lift has

arrived to its destination the door will be un-

locked.

The light (emergency light), the alarm but-

ton system and the alarm telephone have an

emergency battery backup which allows them

to function in the event of a power failure. The

battery backup also support the lifts safety

functions.

The lift will automatically go back to main

power without resetting after the power failure.

In case of a long power failure, or if the power

is disconnected more than 7 hours, the backup

battery will be disconnected. This function save

the battery from total discharge. When the

battery is disconnected all the lift functions are

disabled.

If the lift has been out of power or has done an

emergency lowering run it will sometimes run

in the wrong direction as the lift control system

position needs to be updated. The status sym-

bol will be lit with a yellow light. Keep pushing

the SmartContro l and the lift will soon run to

the correct destination.

If there are any problems, call for service per-

sonnel.

SIMPLE FAULT FINDING

Should the carrier lift not work or the call but-

tons flashes, check the following things:

• That the emergency stop button on the con-

trol panel is not pushed in (turn the button

clockwise to deactivate).

• That the doors are closed and the door con-

tacts are undamaged and clean.

• That the power is not switched off.

• That the safety edge around the carrier floor

and above the DesignWall is not stuck in a

pressed position.

If the lift fails to work after you have completed

these checks then you should arrange for a

service personnel to rectify the lift.

EmeRgency

and fault

FInDing

paGe 10

Inhaltsverzeichnis

Andere ARITCO Hebesystem Handbücher

ARITCO

ARITCO 7000 Series Leitfaden

Beliebte Hebesystem Handbücher anderer Marken

morse

morse 82H-124 Bedienungsanleitung

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung