ARMATURA AHDU Series Bedienungsanleitung

User Manual

Armatura Horizon Controller

IP-Based Biometric Door Unit

Applicable Models: AHSC-1000, AHDU-Series, AHEB Series

Date: September 2023

Version: 2.0

Armatura Horizon Controller User Manual

P a g e |I

Without the prior written consent of ARMATURA LLC, no portion of this manual can be

copied or forwarded in any way or form. All parts of this manual belong to ARMATURA LLC

and its subsidiaries (hereinafter the "Company" or "Armatura").

Trademark

is a registered trademark of ARMATURA LLC. Other trademarks involved in

this manual are owned by their respective owners.

Disclaimer

This manual contains information on the operation and maintenance of the Armatura

equipment. The copyright in all the documents, drawings, etc. in relation to the Armatura

supplied equipment vests in and is the property of Armatura. The contents hereof should

not be used or shared by the receiver with any third party without express written permission of

Armatura.

The contents of this manual must be read as a whole before starting the operation and

maintenance of the supplied equipment. If any of the content(s) of the manual seems

unclear or incomplete, please contact Armatura before starting the operation and maintenance of

the said equipment.

It is an essential pre-requisite for the satisfactory operation and maintenance that the

operating and maintenance personnel are fully familiar with the design and that the said

personnel have received thorough training in operating and maintaining the machine/unit/

equipment. It is further essential for the safe operation of the machine/unit/ equipment that

personnel has read, understood and followed the safety instructions contained in the

manual.

In case of any conflict between terms and conditions of this manual and the contract

specifications, drawings, instruction sheets or any other contract-related documents, the

contract conditions/documents shall prevail. The contract specific conditions/documents

shall apply in priority.

Armatura offers no warranty, guarantee or representation regarding the completeness of

any information contained in this manual or any of the amendments made thereto. Armatura

does not extend the warranty of any kind, including, without limitation, any warranty of design,

merchantability or fitness for a particular purpose.

Armatura does not assume responsibility for any errors or omissions in the information or

documents which are referenced by or linked to this manual. The entire risk as to the results

and performance obtained from using the information is assumed by the user.

Armatura in no event shall be liable to the user or any third party for any incidental,

consequential, indirect, special, or exemplary damages, including, without limitation, loss of

business, loss of profits, business interruption, loss of business information or any pecuniary loss,

arising out of, in connection with, or relating to the use of the information contained in or

Armatura Horizon Controller User Manual

P a g e |II

referenced by this manual, even if Armatura has been advised of the possibility of such

damages.

This manual and the information contained therein may include technical, other inaccuracies or

typographical errors. Armatura periodically changes the information herein which will be

incorporated into new additions/amendments to the manual. Armatura reserves the right to

add, delete, amend or modify the information contained in the manual from time to time in

the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/

equipment. The said additions or amendments are meant for improvement /better

operations of the machine/unit/equipment and such amendments shall not give any right to

claim any compensation or damages under any circumstances.

Armatura shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due

to any non-compliance of the instructions contained in this manual (ii) in case of operation

of the machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine and

equipment in conditions different from the prescribed conditions of the manual.

The product will be updated from time to time without prior notice. The latest operation

procedures and relevant documents are available on http://www.armatura.us.

If there is any issue related to the product, please contact us.

Armatura LLC. Co., Ltd.

Address: 190 Bluegrass Valley Parkway Alpharetta, GA 30005 USA

Phone: +1-650-4556863

For business related queries, please write to us at: [email protected].

To know more about our global branches, visit www.armatura.us.

About the Manual

This manual introduces the operations of Armatura Horizon Controller IP-Based Biometric

Door Unit.

All figures displayed are for illustration purposes only. Figures in this manual may not be

exactly consistent with the actual products.

Features and parameters with ★are not available in all devices.

Armatura Horizon Controller User Manual

P a g e |III

Table of Contents

1. Safety Instructions ...................................................................................................................1

1.1 Important Security Instructions ...................................................................................................................... 1

1.2 Installation Instructions .......................................................................................................................................2

2. Overview ....................................................................................................................................4

2.1 Packing List ..............................................................................................................................................................4

2.2 Introduction ...............................................................................................................................................................5

2.3 Features.....................................................................................................................................................................5

2.4 Appearance..............................................................................................................................................................8

2.4.1 AHSC-1000 Primary Controller ........................................................................................................8

2.4.2 AHDU-1X60 Secondary Controller................................................................................................ 9

2.4.3 AHEB-0808 Expansion Board........................................................................................................10

2.4.4 AHEB-1602 Expansion Board........................................................................................................11

2.4.5 ENC1 Enclosure (optional).............................................................................................................. 12

2.5 General Information ...........................................................................................................................................12

2.6 Power Specification ...........................................................................................................................................14

2.6.1 Product Main Specifications............................................................................................................14

2.6.2 Environmental Conditions................................................................................................................ 15

2.6.3 Electrical Characteristics .................................................................................................................. 15

3. Installation and Connection ..................................................................................................17

3.1 Installation Procedure .......................................................................................................................................17

3.1.1 Installation with screws ......................................................................................................................17

3.1.2 Installation with original 35mm DIN rail.....................................................................................18

3.1.3 Installation with extended 35mm DIN rail adapter ...............................................................19

3.2 Installation the ENC1 enclosure on the wall .........................................................................................21

3.3 Access Control System Installation ...........................................................................................................22

3.4 Controller System Installation ...................................................................................................................... 23

3.5 Access Control System Power Supply Structure...............................................................................24

4. Terminal and Wiring Description ......................................................................................... 26

4.1 Controller Connection Terminals................................................................................................................26

4.2 Terminal Description .........................................................................................................................................27

4.2.1 AHSC-1000 ..............................................................................................................................................27

4.2.2 AHDU-1160 ..............................................................................................................................................28

4.2.3 AHDU-1260 ..............................................................................................................................................29

4.2.4 AHDU-1460 ..............................................................................................................................................30

4.2.5 AHEB-0808 .............................................................................................................................................. 31

4.2.6 AHEB-1602 .............................................................................................................................................. 32

Armatura Horizon Controller User Manual

P a g e |IV

4.3 Wiring Description.............................................................................................................................................. 33

4.3.1 Power Wiring...........................................................................................................................................33

4.3.2 Network Wiring.......................................................................................................................................33

4.3.3 Auxiliary Output Wiring...................................................................................................................... 34

4.3.4 Auxiliary Input Wiring.......................................................................................................................... 34

4.3.5 Door Sensor, Exit Button Wiring...................................................................................................35

4.3.6 Wiegand Reader Wiring.................................................................................................................... 37

4.3.7 Lock Relay Wiring.................................................................................................................................37

4.3.8 Fire Alarm Monitoring Wiring ..........................................................................................................38

4.3.9 RS-485 Reader Wiring.......................................................................................................................39

4.3.10 I/O Board Wiring................................................................................................................................. 42

4.3.11 Line Monitoring....................................................................................................................................50

5. Equipment Communication .................................................................................................. 51

5.1 Access Control Network Wires and Wiring........................................................................................... 51

5.2 TCP/IP Communication ...................................................................................................................................52

5.3 Configuring Network Settings on the Controller Webserve................................................................. 53

5.3.1 Opening the Webserver on the Browser .................................................................................. 53

5.3.2 Login to the Webserver..................................................................................................................... 54

5.3.3 TCP/IP Settings..................................................................................................................................... 55

5.3.4 Wireless Network Settings ...............................................................................................................56

5.3.5 Setting up the Server/Primary Controller................................................................................. 57

6. Connect to the ARMATURA One Software............................................................................. 60

6.1 Export the Key File .............................................................................................................................................60

6.2 Server Connection Configuration ...............................................................................................................61

6.3 Add Device on the Software......................................................................................................................... 61

6.4 Configuring the Reader ................................................................................................................................... 63

6.5 Add Personnel on the Software .................................................................................................................. 64

7. System Management Mode Connection................................................................................. 66

7.1 Master-Slave Mode........................................................................................................................................... 66

7.1.1 Connect AHDU-1X60 to AHSC-1000 via TCP/IP................................................................66

7.1.2 Connect AHDU-1X60 to AHSC1000 via RS-485 .................................................................73

7.2 Master Mode......................................................................................................................................................... 76

7.2.1 Adding a Primary Controller............................................................................................................76

8. FAQ...........................................................................................................................................81

9. Appendix .................................................................................................................................. 82

9.1 Privacy Policy....................................................................................................................................................... 82

9.2 Eco-friendly Operation ..................................................................................................................................... 84

9.3 Attachment ............................................................................................................................................................. 85

Armatura Horizon Controller User Manual

P a g e |1

1. Safety Instructions

1.1 Important Security Instructions

1. Read and follow the instructions carefully before operation. Please keep the instructions

for future reference.

2. Accessories: Please use the accessories recommended by the manufacturer or delivered

with the product. Other accessories are not recommended, including major alarming systems

and monitoring systems. The primary alarming and monitoring system should comply

with the local applicable fire-prevention and security standards.

3. Installation cautions: Do not place this equipment on an unstable table, tripod mount, support,

or base, lest the equipment falls and get damaged or any other undesirable outcome resulting

in severe personal injuries. Therefore, it is essential to install the equipment as instructed

by the manufacturer.

4. All peripheral devices must be grounded.

5. No external connection wires can be exposed. All the connections and idle wire ends must be

wrapped with insulating tapes to prevent any damage to the equipment by accidental

contact of the exposed wires.

6. Repair: Do not attempt to have an unauthorized repair of the equipment. Disassembly or

detachment is risky and likely to cause shock. All repairs should be done by a qualified

technician.

7. If any of the following cases arise, disconnect the power supply from the equipment first

and intimate the technician immediately.

The power cord or connector appears to be damaged.

Any liquid or material spilled into the equipment.

The equipment is wet or exposed to inclement weather conditions (rain, snow, etc.).

If the equipment cannot function properly, even when operated as instructed, please

make sure to adjust only the control components specified in the operating instructions.

Making incorrect adjustments to other control components may cause damage to the

equipment or result in permanent operational failure.

The equipment falls, or its performance changes dramatically.

8. Replacing components: If it is necessary to replace a component, only an authorized

technician can replace the accessories specified by the manufacturer.

9. Security inspection: After the equipment is repaired, the technician must conduct a security

inspection to ensure the proper working condition of the equipment.

10. Power supply: Operate the equipment only with the type of power supply indicated

on the label. If there is any uncertainty about the type of power supply, please contact the

technician.

Armatura Horizon Controller User Manual

P a g e |2

Violation of any of the following cautions is likely to result in personal injury or equipment

failure. We will not be responsible for the damages or injuries caused thereby.

Before installation, switch off the external circuit (that supplies power to the system),

including locks.

Before connecting the equipment to the power supply, ensure the output voltage is

within the specified range.

Never connect the power before completion of installation.

1.2 Installation Instructions

1. The conduits of wires under the relay must match with the metal conduits; for other wires,

PVC conduits can be used to prevent failure caused by rodent damage. The control panel

is designed with proper antistatic, lightning-proof, and leakage-proof functions. Ensure

that its chassis and the AC ground wire are correctly connected and that the AC ground

wire is physically grounded.

2. It is recommended not to plug/unplug connection terminals frequently when the system is

powered on. Be sure to unplug the connection terminals before starting any relevant wiring job.

3. Do not detach or replace any control panel chip without permission, and an unauthorized

operation may cause damage to the control panel.

4. It is recommended not to connect any other auxiliary devices without permission. All non-

routine operations must be communicated to our engineers in advance.

5. A control panel should not share the same power outlet with any other high-current device.

6. It is recommended to install card readers and buttons at the height of 55.12 inches to

59.06 inches (1.4m to 1.5m) above the ground or subject to customers’ usual practice for

proper adjustment.

7. It is recommended to install control panels in easily accessible locations to facilitate

maintenance, such as in a well-ventilated electrical room.

8. For safety reasons, it is strongly recommended that the exposed part of any connection

terminal should not exceed 0.16 inches (4mm) in length. Consider using specialized

clamping tools to prevent short-circuits or communication failures caused by accidental

contact with excessively exposed wires.

9. To ensure access control event records are saved, regularly export the data from control

panels.

10. Prepare appropriate countermeasures for unexpected power failures based on application

scenarios, such as selecting a power supply with an uninterruptible power supply (UPS)

system.

11. If an RS-485 reader is externally connected and shares the power supply with the device

Armatura Horizon Controller User Manual

P a g e |3

(Note: The control panel does not support fingerprint verification of RS-485 reader), it is

recommended to keep the connection between the RS-485 reader port and the reader no

longer than 328 ft (100m). Alternatively, it is advised to use a separate power supply for

the reader.

12. To safeguard the access control system from any self-induced electromotive force

generated by an electronic lock during switching off/on, it is essential to connect a diode

in parallel (FR107, supplied with the system) with the electronic lock. This diode will

dissipate the self-induced electromotive force during onsite connection, ensuring the

proper application of the access control system.

13. It is advisable to use separate power supplies for the electronic lock and the control panel.

14. It is recommended to use the power supply provided with the system as the control panel

power supply.

15. In locations with significant magnetic interference, it is advisable to use galvanized steel

pipes or shielded cables, and ensure proper grounding is implemented.

16. Wiring methods used shall be in accordance with the National Electrical Code, ANSI/

NFPA 70.

Armatura Horizon Controller User Manual

P a g e |4

2. Overview

2.1 Packing List

Please ensure that your box contains all the items listed. If any pieces are missing, kindly contact your

distributor for assistance. It is advisable to retain the original box and packing materials in case

you need to ship your equipment in the future.

AHSC-1000

ARMATURA Horizon Controller (AHSC-1000) (1pc)

35mm DIN rail adapter: T=0.03" 9.39"x1.34"x0.25" (T=0.7mm 238.5x35x6.3mm) (1pc)

WIFI external antenna (3pcs)

Screwdriver (1pc)

Fast Recovery Diode(FR107) (4pcs)

Grub screw/Countersunk 7#1-5/8inch (KA3.6x40mm) self – tapping screws (2pcs) and Anchors

(2pcs)

– for mounting directly to a wall

Grub screw/Countersunk TM3x6mm screw (1pc)

AHDU-1160/1260/1460

ARMATURA Horizon Controller (AHDU-1160/1260/1460) (1pc)

35mm DIN rail adapter: T=0.03" 9.39"x1.34"x0.25" (T=0.7mm 238.5x35x6.3mm) (1pc)

WIFI external antenna (3pcs)

Screwdriver (1pc)

Fast Recovery Diode(FR107) (4pcs)

Grub screw/Countersunk 7#1-5/8inch (KA3.6x40mm) self – tapping screws (2pcs) and Anchors

(2pcs)

– for mounting directly to a wall

Grub screw/Countersunk TM3x6mm screw (1pc)

AHEB-0808/AHEB-1602

ARMATURA expansion board (AHEB-0808/AHEB-1602) (1pc)

Screwdriver (1pc)

Fast Recovery Diode(FR107) (8pcs)

Mounting screws (4pcs)

Hexagonal copper column (4pcs)

Armatura Horizon Controller User Manual

P a g e |5

2.2 Introduction

The ARMATURA Horizon Controller Series is an access control system developed by

ARMATURA LLC. It is designed for the enterprise-level market. Particularly for large projects

with a large number of access points, and stringent security requirements. The entire product

series offers comprehensive improvements in hardware, architecture, and system security

encryption.

2.3 Features

Ultimate Authentication Performance

PoE and 3rd Party Integration

Threat Levels and Port Failover

Advanced Access Control Functions

Supervised Inputs and NC/NO Configurable Ports

Key Features

Ultimate authentication performance

Supports up to 400,000 (1:1) RFID card/mobile credentials and 100,000 (1:N) fingerprints

authentications in a single controller.

PoE

Supports Power-over-Ethernet (PoE) 802.3at/ 9-24VDC from power sourcing equipment (PSE)

according to PoE 802.3at/af standards.

Threat Levels

Unlimited threat levels, which are used to instantly adjust users access right during lockdown

and lockout.

3rd Party Integration

Supports various reader protocols, including ARMATURA Explorer series readers, along

with 3rd party Wiegand and OSDP readers. ARMATURA One provides a RESTful API for

seamless integration with 3rd Party software.

Advanced Access Control Functions

The controller supports advanced access control functions such as multi-frequency RFID

card support, multi-biometric authentication support, mobile credential support, anti-

passback, multi-level authentication and cross panel linkage (global linkage).

Port Failover

The AHDU controller series has dual ethernet ports. If the primary communication port fails,

it will then switch to the secondary port automatically (the controller supports separate

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ARMATURA Controller Handbücher

ARMATURA

ARMATURA OmniAC20CAPQ Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung