Array electronic 367 Series Bedienungsanleitung
1
USER’S MANUAL
SWITCHING-MODE DC POWER SUPPLY
ARRAY 367X
ARRAY ELECTRONIC
2
ARRAY 367X
SWITCHING-MODE DC POWER SUPPLY
ARRAY 367X is a series of 800W programmable switching-mode DC power supplies
with RS-232, USB (optional) and GPIB (optional) interfaces. The good durability,
simple operation, low noise, excellent output accuracy as well as the adjustment from
0V make this series of reliable power supplies the right choice for many applications.
It provides flexible and stable DC power for various design and test environments.
Versatile Bench-Top Features
＊High definition liquid crystal display
＊Full-featured keyboard and knobs
＊High-efficient switching-mode power supply
＊The same continuous adjustment (0-Vout) as the linear power supply
＊Low ripple and noise which rivals the linear power supply
＊Excellent line and load regulation
＊Up to 10 operating states storage and recall
＊Portable, ruggedized case and flexible system functions
＊Standardized USB interface, optional GPIB and optional USB interface
＊SCPI ( Standard Commands for Programmable Instruments) compatibility
＊Direct setting of I/O Parameters from the front-panel
3
The Front Panel at a Glance
1.ACpowerswitch 2.Senseterminals
3. Earth ground terminal 4. Supply output terminals
5. Output on/off key 6. Left/Right key
7. Control knob 8. Up/Down key
9. Menu setting key 10. Voltage setting key
11. Current setting key 12. Switch key for second function
13. Store key for second function 14. Recall key for second function
15. Error key for second function 16 Local key for second function
17. Secure key for second function 18. Number key
19. Clear key for second function 20. Enter key
21. Display screen 22. ERR annunciator
23. REM annunciator
1. AC power switch: Turns the AC power on and off.
2. Sense terminals: Tests remote voltage, the positive pole is in red while the negative
pole is in black.
3. Earth ground terminal:It is connected to the chassis and earth ground.
4. Supply output terminals: Supply output, the positive output terminal is in red while
the negative output terminal is in black.
5. Output on/off key: Turns the power supply on/off.
6. Left/Right key: Moves the blinking digit to left or right, or selects different options.
7. Control knob: Adjusts the value of the blinking digit or selects different options by
turning clockwise or counter clockwise.
8. Up/Down key: Turns the menu page.
9. Menu setting key: Enters menu setting contents.
10. Voltage setting key (VSET): Displays or modifies the present voltage setting
value.
11. Current setting key (ISET): Displays or modifies the present current setting value.
4
12. Switch key for the second function (2nd): Enables the second function of other
keys.
13. Store key for the second function (Save): Stores the present operating states in
location “0”, “1”, … “9”.
14. Recall key for the second function (Recall): Recalls a previously stored operating
state from location “0”, “1”,…“9”.
15. Error key for the second function (Error): Checks or reads the error codes.
16. Local key for the second function (Local): Returns the power supply to local
mode from remote control mode.
17. Secure key for the second function (I/O config): Secures and unsecures the power
supply for calibration.
18. Number key (0-9 and.): Sets values.
19. Clear key for the second function (Clear): Clears present input value or exits
current operation.
20. Enter key (Enter): Confirms present setting values or option.
21. Display screen: Shows parameters and status of power supply.
22. ERR annunciator: When some error is detected, ERR annunciator is on.
23. REM annunciator: When the power supply is in remote control mode, REM
annunciator is on.
Front-Panel Display Messages
0.000V Display present voltage value.
0.000A Display present current value.
0.000W Display present power value.
OT The power supply is in over-temperature state.
OV The power supply is in over-voltage state and the supply output is
disabled.
OFF The output of power supply is off.
ERROR Hardware or remote interface control commands errors are detected and
the error bits have not been cleared or read.
Unreg The present output of the power supply is unregulated. (The output is
neither CV nor CC.)
CV The output of power supply is in CV mode.
5
CC The output of power supply is in CC mode.
The Rear Panel at a Glance
1.ACinlet 2.Fuseholder
3. RS-232 interface connector 4. GPIB or USB interface connector (optional)
5. Fan outlet
An Introduction to this Manual
General Information
Apart from a general description of your power supply, it provides instructions for
checking your power supply, selecting power-line voltage and connecting to AC
power.
Initial Operation
It ensures that the power supply develops its rated outputs and responds to operation
from the front panel properly.
Front-Panel Operation
It describes the use of front-panel keys and knobs in detail and how to use them to
operate the power supply from the front panel. And it also shows how to configure the
power supply for the remote interface and introduces the calibration features in brief.
Remote Interface Reference
It contains the reference information to help you program the power supply over the
remote interface, and explains how to program for status reporting as well.
Application Programs
It provides some remote interface applications to help you develop programs for your
application.
6
Tutorial
It describes basic operation of the power supply and gives specific details on the
operation and use of ARRAY 367X power supplies.
Specifications
It lists the power supply’s basic specifications.
7
Contents
Chapter 1 General Information ……………………………………...................... 11
General Information………………………………………………………………… 11
Safety Considerations………………………………………………….. ………… ...11
Description……………………………………………………………...................... 11
Installation……………………………………………………………………………12
Initial Inspection……………………………………………………….......................12
Mechanical Check……………………………………………………………………12
Electrical Check……………………………………………………………………12
Temperature Control………………………………………………………………… 12
Rack Mounting……………………………………………………………………….13
Chapter 2 Initial Operation ………………………………………………………..14
Initial Operation ……………………………………………………………………..14
Preliminary Checkout………………………………………………………………..14
Power-Line Cord……………………………………………………………………..14
Fuse Replacement……………………………………………………………………15
Power-On Checkout………………………………………………………….16
Self-test started……………………………………………………………….16
Self-test accomplished………………………………………………………..16
Enabling the outputs…………………………………………………………..16
Output Checkout……………………………………………………………….17
Voltage Output Checkout………………………………………………………17
Current Output Checkout………………………………………………………18
Chapter 3 Front Panel Operation……………………………………………20
Front Panel Operation………………………………………………………….20
Front Panel Operation Overview………………………………………………...20
Output on/off…………………………………………………………………….20
Constant Voltage Output Setting…………………………………………………21
Connecting a load to the relevant output terminals………………………………...21
Turning on the power supply……………………………………………………….21
Setting desired output voltage……………………………………………………….21
Setting maximum current……………………………………………………………21
Enabling the outputs…………………………………………………………………22
Verifying that the power supply is in the constant voltage mode………………….22
Constant Current Output Setting…………………………………………………22
Connecting a load to the relevant output terminals………………………………….22
Turning on the power supply………………………………………………………..22
Maximum output voltage setting…………………………………………………..22
Setting the desired output current……………………………………………………23
8
Enabling the outputs………………………………………………………………….23
Verifying that the power supply is in the constant current mode…………………..23
Menu Setting ………………………………………………………………………24
Main Menu Description…………………………………………………………….24
Storing and Recalling………………………………………………………………24
Error Messages Display…………………………………………………………….25
Local/ Remote Operation Switch…………………………………………………..25
Protection Function…………………………………………………………………26
Abnormal Latched State Clearance…………………………………………………26
Over-Voltage…………………………………………………………………………26
Over-Temperature…………………………………………………………………….26
The Power Supply Calibration……………………………………………………….27
Calibration Instrument………………………………………………………………..27
Cautions……………………………………………………………………………..27
Calibration Procedures………………………………………………………………27
Chapter 4 Remote Interface Reference ………………………………………….31
Remote Interface Reference………………………………………………………….31
SCPI Command Summary…………………………………………………………31
An Introduction to the SCPI Language…………………………………………….32
Command Format Used in This Manual……………………………………………33
Command Separators………………………………………………………………..34
Using the MIN and MAX Parameters……………………………………………….34
Querying Parameter Settings…………………………………………………………34
SCPI Command Terminators……………………………………………………….35
SCPI Parameter Types………………………………………………………………35
Numeric Parameters…………………………………………………………………35
Discrete Parameters………………………………………………………………….35
Boolean Parameters………………………………………………………………….35
String Parameters……………………………………………………………………35
Output Setting and Operation Commands…………………………………………..36
Trigger Commands………………………………………………………………….36
System-Related Commands…………………………………………………………36
Calibration Commands………………………………………………………………37
Status Reporting Commands……………………………………………………….37
RS-232 Interface Commands……………………………………………………….38
Simplified Programming Overview…………………………………………………38
Using the APPLy Command……………………………………………………….38
Using the Low-Level Commands………………………………………………….38
Selecting a Trigger Source…………………………………………………………39
Using the APPLY Command………………………………………………………39
Output Setting and Operation Commands………………………………………….40
Measurement Commands…………………………………………………………..40
Output on/off and Tracking Operation Commands………………………………….41
9
Output Setting Commands………………………………………………………….41
Trigger Source Choice………………………………………………………………43
Bus (Software) Triggering…………………………………………………………43
Immediate Triggering……………………………………………………………….44
Trigger Commands……………………………………………………………….44
System-Related Commands………………………………………………………….44
Calibration Commands……………………………………………………………….47
RS-232 Interface Commands………………………………………………………48
The SCPI Status Registers…………………………………………………………48
What is an Event Register?.......................................................................................48
What is an Enable Register?.....................................................................................49
The Questionable Status Register……………………………………………………50
The Standard Event Register…………………………………………………………51
The Status Byte Register……………………………………………………………53
Status Reporting Commands……………………………………………………….53
SCPI Conformance Information……………………………………………………55
SCPI Confirmed Commands…………………………………………………….55
Device-Specific Commands………………………………………………………57
Chapter 5 Application Programs………………………………………………….58
Application Programs………………………………………………………………...58
RS-232 Operation Using QuickBACSIC ………………………………………….58
Chapter 6 Tutorial………………………………………………………………….59
Tutorial……………………………………………………………………………….59
An Overview of ARRAY 367X Operation…………………………………………59
Output Characteristics………………………………………………………………59
Unregulated State…………………………………………………………………….60
Unwanted Signals…………………………………………………………………….60
Connecting the Load………………………………………………………………..61
Output Isolation………………………………………………………………………61
Multiple Loads……………………………………………………………………..61
Considerations……………………………………………………………………….62
Capacitive Load……………………………………………………………………..62
Inductive Load………………………………………………………………………..62
Pulse Load……………………………………………………………………………62
Reverse Current Load………………………………………………………………62
Extending the output………………………………………………………………..62
Reliability………………………………………………………………………….63
Chapter 7 Specifications ……………………………………………………..64
Specifications………………………………………………………………………..64
Performance Specifications………………………………………………………….64
Transient Response Time……………………………………………………………65
10
Command Processing Time………………………………………………………….65
Supplemental Characteristics………………………………………………………65
APPENDIX Error Messages …………………………………………………67
Error Messages…………………………………………………………………….67
Execution Errors…………………………………………………………………….67
Self-Test Errors……………………………………………………………………….70
Calibration Errors ……………………………………………………………………71
Inhaltsverzeichnis
Andere Array electronic Stromversorgung Handbücher
Array electronic
Array electronic 3646A Bedienungsanleitung
Array electronic
Array electronic 3720A Bedienungsanleitung
Array electronic
Array electronic APV 800 Series Bedienungsanleitung
Array electronic
Array electronic 3751A Bedienungsanleitung
Array electronic
Array electronic 3645A Bedienungsanleitung
Array electronic
Array electronic 366X Bedienungsanleitung
Array electronic
Array electronic 3645A-TYPE Bedienungsanleitung
Array electronic
Array electronic 366XA Bedienungsanleitung
Array electronic
Array electronic 3645A Bedienungsanleitung
