1110
Overview
Overview
Home Screen Center Bar
TC Displays current timecode including
source (INT=internal or EXT=external
source). Frames are not displayed,
instead the time base of the timecode
is shown in small digits.
MASTER Camera is set to Ext sync: MASTER
SLAVE Camera is set to Ext sync: SLAVE
Settings sync is active.
BAT 1 Voltage level of power source present
at BAT connector, or percentage of
remaining capacity of attached battery
if it transmits this information.
BAT 2 Voltage level of battery attached to
top and/or back onboard battery
adapter, or percentage of remaining
capacity of attached battery if it
transmits this information.
REEL Identifies current reel. Consists of
camera index and reel counter.
CLIP Identifies current clip. Consists of
clip index and clip counter.
DUR Duration of current clip during
recording or length of last recorded
clip during standby. Shown as
h:mm:ss.
16:9
Displays active sensor mode
(16:9 or 4:3).
ProRes 2K
Displays active recording format
(ARRIRAW, ProRes (HD or 2K) or DNxHD).
SxS Pro
Drive
SxS PRO adapter or XR Capture Drive
inserted into slot.
00:19:28 Remaining capacity of loaded magazine.
FULL Loaded Magazine is full.
No Media No Magazine in slot.
Type Magazine does not support the
currently selected Recording format.
SxS 1 24:26 1 Remaining capacity of card in SxS slot
1 in minutes. Calculated for the set
frame rate and codec.
Note: these are only approximate values.
SxS 1 INHIB 1 Card 1 is write protected.
SxS 1 FULL 1 Card 1 is full.
< Marks the active card.
•STBY The camera is in standby and
ready to record.
• REC The camera is recording.
• ERROR An error occured. Recording is not
possible. Press the INFO button
for more details.
If nothing is shown (neither the
red/green bar), the camera works
properly, but no SxS PRO card is
present for recording.
INT/SxS
Look active
CDL Server active/connected
CDL Server active/not connected
1 not available on ALEXA XT
