2
Transmitter LEDs
LED Status Description
Power nGreen Indicates the correct power has been applied
Audio
(1-4)
OFF Indicates no audio input detected
Green Indicates audio input detected
Alarm nRed Loss of audio data (card version only)
Receiver LEDs
LED Status Description
Power nGreen Indicates that correct power has been applied.
Audio
(1-4)
OFF Indicates no audio detected on the fiber
Green Indicates audio detected on the fiber
Alarm nRed Loss of audio data (card version only)
Green Flashing
FIBERLINK 4040 SERIES INDICATOR LEDS
CS208-004040-00_A
SYSTEM TERMINAL BLOCK CONNECTIONS
Audio Connector - Transmitter
Position Balanced Unbalanced
Position 1- Channel 1 Input (-) Channel 1 Ground
Position 1+ Channel 1 Input (+1) Channel 1 Signal
Position G Ground
Position 2- Channel 2 Input (-) Channel 2 Ground
Position 2+ Channel 2 Input (+) Channel 2 Signal
Position 3- Channel 3 Input (-) Channel 3 Ground
Position 3+ Channel 3 Input (+) Channel 3 Signal
Position G Ground
Position 4- Channel 4 Input (-) Channel 4 Ground
Position 4+ Channel 4 Input (+) Channel 4 Signal
Audio Connector - Receiver
Position Balanced Unbalanced
Position 1- Channel 1 Output (-) Channel 1 Ground
Position 1+ Channel 1 Output (+) Channel 1 Signal
Position G Ground
Position 2- Channel 2 Output (-) Channel 2 Ground
Position 2+ Channel 2 Output (+) Channel 2 Signal
Position 3- Channel 3 Output (-) Channel 3 Ground
Position 3+ Channel 3 Output (+) Channel 3 Signal
Position G Ground
Position 4- Channel 4 Output (-) Channel 4 Ground
Position 4+ Channel 4 Output (+) Channel 4 Signal
Audio Input (Transmitter) Settings
Audio Input
Channel
Switch
Position
On
Off
1
1 600 Ohm 24K Ohm
2 Unbalanced Balanced
2
3 600 Ohm 24K Ohm
4Unbalanced Balanced
3
5 600 Ohm 24K Ohm
6Unbalanced Balanced
4
7 600 Ohm 24K Ohm
8 Unbalanced Balanced
Audio Output (Receiver) Settings
Audio Input
Channel
Switch
Position
On
Off
1 1 Unbalanced Balanced
2 2 Unbalanced Balanced
3 3 Unbalanced Balanced
4 4 Unbalanced Balanced
Note: Switches 5, 6, 7, and 8 are not used on the 4041-Bxy (Receiver) and
should be le in the o position.
AUDIO SWITCH SETTINGS
Additional information is available online at www.artel.com
T: 978-263-5775
www.artel.com
customercare@artel.com
Sales
FiberLink 4040 Series Four Channels of Audio Over One Single Mode or Multimode Fiber
