2
3. Calibration settings need to be changed:
•Press and hold the LEFT ARROW button on the remote until the selector turns orange.
•Use the left, right, up, down, and ok (select) buttons to navigate through the menu.
•Select “Save & Next”when finished changing the settings.
oThe SKU needs to be changed to: Walk-in Van.
oMeasurements need to be taken between the mats –length and width. (in
centimeters)
▪Enter the values to the nearest 10th.
▪Adjust the numbers if needed after moving the mats around in the next
step.
oTo restart the module/process press and hold the MENU button on remote to
reset the 360 module.
